FreeBSD/Linux Kernel Cross Reference
sys/isa/isareg.h
1 /*-
2 * Copyright (c) 1990 The Regents of the University of California.
3 * All rights reserved.
4 *
5 * This code is derived from software contributed to Berkeley by
6 * William Jolitz.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 4. Neither the name of the University nor the names of its contributors
17 * may be used to endorse or promote products derived from this software
18 * without specific prior written permission.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
24 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 * SUCH DAMAGE.
31 *
32 * from: @(#)isa.h 5.7 (Berkeley) 5/9/91
33 * $FreeBSD$
34 */
35
36 #ifdef PC98
37 #error isareg.h is included from PC-9801 source
38 #endif
39
40 #ifndef _ISA_ISA_H_
41 #define _ISA_ISA_H_
42
43 /* BEWARE: Included in both assembler and C code */
44
45 /*
46 * ISA Bus conventions
47 */
48
49 /*
50 * Input / Output Port Assignments
51 */
52 #ifndef IO_ISABEGIN
53 #define IO_ISABEGIN 0x000 /* 0x000 - Beginning of I/O Registers */
54
55 /* CPU Board */
56 #define IO_ICU1 0x020 /* 8259A Interrupt Controller #1 */
57 #define IO_PMP1 0x026 /* 82347 Power Management Peripheral */
58 #define IO_KBD 0x060 /* 8042 Keyboard */
59 #define IO_RTC 0x070 /* RTC */
60 #define IO_NMI IO_RTC /* NMI Control */
61 #define IO_ICU2 0x0A0 /* 8259A Interrupt Controller #2 */
62
63 /* Cards */
64 /* 0x100 - 0x16F Open */
65
66 #define IO_WD2 0x170 /* Secondary Fixed Disk Controller */
67
68 #define IO_PMP2 0x178 /* 82347 Power Management Peripheral */
69
70 /* 0x17A - 0x1EF Open */
71
72 #define IO_WD1 0x1F0 /* Primary Fixed Disk Controller */
73 #define IO_GAME 0x201 /* Game Controller */
74
75 /* 0x202 - 0x22A Open */
76
77 #define IO_ASC2 0x22B /* AmiScan addr.grp. 2 */
78
79 /* 0x230 - 0x26A Open */
80
81 #define IO_ASC3 0x26B /* AmiScan addr.grp. 3 */
82 #define IO_GSC1 0x270 /* -- 0x27B! GeniScan GS-4500 addr.grp. 1 */
83 #define IO_LPT2 0x278 /* Parallel Port #2 */
84
85 /* 0x280 - 0x2AA Open */
86
87 #define IO_ASC4 0x2AB /* AmiScan addr.grp. 4 */
88
89 /* 0x2B0 - 0x2DF Open */
90
91 #define IO_GSC2 0x2E0 /* GeniScan GS-4500 addr.grp. 2 */
92 #define IO_COM4 0x2E8 /* COM4 i/o address */
93 #define IO_ASC5 0x2EB /* AmiScan addr.grp. 5 */
94
95 /* 0x2F0 - 0x2F7 Open */
96
97 #define IO_COM2 0x2F8 /* COM2 i/o address */
98
99 /* 0x300 - 0x32A Open */
100
101 #define IO_ASC6 0x32B /* AmiScan addr.grp. 6 */
102 #define IO_AHA0 0x330 /* adaptec 1542 default addr. */
103 #define IO_BT0 0x330 /* bustek 742a default addr. */
104 #define IO_UHA0 0x330 /* ultrastore 14f default addr. */
105 #define IO_AHA1 0x334 /* adaptec 1542 default addr. */
106 #define IO_BT1 0x334 /* bustek 742a default addr. */
107
108 /* 0x340 - 0x36A Open */
109
110 #define IO_ASC7 0x36B /* AmiScan addr.grp. 7 */
111 #define IO_GSC3 0x370 /* GeniScan GS-4500 addr.grp. 3 */
112 #define IO_FD2 0x370 /* secondary base i/o address */
113 #define IO_LPT1 0x378 /* Parallel Port #1 */
114
115 /* 0x380 - 0x3AA Open */
116
117 #define IO_ASC8 0x3AB /* AmiScan addr.grp. 8 */
118 #define IO_MDA 0x3B0 /* Monochome Adapter */
119 #define IO_LPT3 0x3BC /* Monochome Adapter Printer Port */
120 #define IO_VGA 0x3C0 /* E/VGA Ports */
121 #define IO_CGA 0x3D0 /* CGA Ports */
122 #define IO_GSC4 0x3E0 /* GeniScan GS-4500 addr.grp. 4 */
123 #define IO_COM3 0x3E8 /* COM3 i/o address */
124 #define IO_ASC1 0x3EB /* AmiScan addr.grp. 1 */
125 #define IO_FD1 0x3F0 /* primary base i/o address */
126 #define IO_COM1 0x3F8 /* COM1 i/o address */
127
128 #define IO_ISAEND 0x3FF /* End (actually Max) of I/O Regs */
129 #endif /* !IO_ISABEGIN */
130
131 /*
132 * Input / Output Port Sizes - these are from several sources, and tend
133 * to be the larger of what was found.
134 */
135 #ifndef IO_ISASIZES
136 #define IO_ISASIZES
137
138 #define IO_ASCSIZE 5 /* AmiScan GI1904-based hand scanner */
139 #define IO_CGASIZE 12 /* CGA controllers */
140 #define IO_EISASIZE 256 /* EISA controllers */
141 #define IO_FDCSIZE 8 /* Nec765 floppy controllers */
142 #define IO_GAMSIZE 16 /* AT compatible game controllers */
143 #define IO_GSCSIZE 8 /* GeniScan GS-4500G hand scanner */
144 #define IO_ICUSIZE 16 /* 8259A interrupt controllers */
145 #define IO_KBDSIZE 16 /* 8042 Keyboard controllers */
146
147 /* The following line was changed to support more architectures (simpler
148 chipsets (like those for Alpha) only use 4, but more complex controllers
149 (usually modern i386's) can use an additional 4; the probe to see if
150 the additional 4 can be used by the specific chipset is now done in the ppc
151 code by ppc_probe()... */
152
153 #define IO_LPTSIZE_EXTENDED 8 /* "Extended" LPT controllers */
154 #define IO_LPTSIZE_NORMAL 4 /* "Normal" LPT controllers */
155
156 #define IO_MDASIZE 12 /* Monochrome display controllers */
157 #define IO_PMPSIZE 2 /* 82347 power management peripheral */
158 #define IO_PSMSIZE 5 /* 8042 Keyboard controllers */
159 #define IO_RTCSIZE 16 /* CMOS real time clock, NMI control */
160 #define IO_TMRSIZE 16 /* 8253 programmable timers */
161 #define IO_VGASIZE 16 /* VGA controllers */
162 #define IO_WDCSIZE 8 /* WD compatible disk controllers */
163
164 #endif /* !IO_ISASIZES */
165
166 /*
167 * Input / Output Memory Physical Addresses
168 */
169 #ifndef IOM_BEGIN
170 #define IOM_BEGIN 0x0A0000 /* Start of I/O Memory "hole" */
171 #define IOM_END 0x100000 /* End of I/O Memory "hole" */
172 #define IOM_SIZE (IOM_END - IOM_BEGIN)
173 #endif /* !IOM_BEGIN */
174
175 /*
176 * RAM Physical Address Space (ignoring the above mentioned "hole")
177 */
178 #ifndef RAM_BEGIN
179 #define RAM_BEGIN 0x0000000 /* Start of RAM Memory */
180 #define RAM_END 0x1000000 /* End of RAM Memory */
181 #define RAM_SIZE (RAM_END - RAM_BEGIN)
182 #endif /* !RAM_BEGIN */
183
184 #endif /* !_ISA_ISA_H_ */
Cache object: 48db15a194b81d312a2c0db873c1b307
|