The Design and Implementation of the FreeBSD Operating System, Second Edition
Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

FreeBSD/Linux Kernel Cross Reference
sys/isa/pnpreg.h

Version: -  FREEBSD  -  FREEBSD-13-STABLE  -  FREEBSD-13-0  -  FREEBSD-12-STABLE  -  FREEBSD-12-0  -  FREEBSD-11-STABLE  -  FREEBSD-11-0  -  FREEBSD-10-STABLE  -  FREEBSD-10-0  -  FREEBSD-9-STABLE  -  FREEBSD-9-0  -  FREEBSD-8-STABLE  -  FREEBSD-8-0  -  FREEBSD-7-STABLE  -  FREEBSD-7-0  -  FREEBSD-6-STABLE  -  FREEBSD-6-0  -  FREEBSD-5-STABLE  -  FREEBSD-5-0  -  FREEBSD-4-STABLE  -  FREEBSD-3-STABLE  -  FREEBSD22  -  l41  -  OPENBSD  -  linux-2.6  -  MK84  -  PLAN9  -  xnu-8792 
SearchContext: -  none  -  3  -  10 

    1 /*-
    2  * Copyright (c) 1996, Sujal M. Patel
    3  * All rights reserved.
    4  *
    5  * Redistribution and use in source and binary forms, with or without
    6  * modification, are permitted provided that the following conditions
    7  * are met:
    8  * 1. Redistributions of source code must retain the above copyright
    9  *    notice, this list of conditions and the following disclaimer.
   10  * 2. Redistributions in binary form must reproduce the above copyright
   11  *    notice, this list of conditions and the following disclaimer in the
   12  *    documentation and/or other materials provided with the distribution.
   13  * 3. All advertising materials mentioning features or use of this software
   14  *    must display the following acknowledgement:
   15  *      This product includes software developed by Sujal M. Patel
   16  * 4. Neither the name of the author nor the names of any co-contributors
   17  *    may be used to endorse or promote products derived from this software
   18  *    without specific prior written permission.
   19  *
   20  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
   21  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
   22  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
   23  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
   24  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
   25  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
   26  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
   27  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
   28  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
   29  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
   30  * SUCH DAMAGE.
   31  *
   32  *      $FreeBSD: releng/11.2/sys/isa/pnpreg.h 331722 2018-03-29 02:50:57Z eadler $
   33  *      from: pnp.h,v 1.7 1998/09/13 22:15:44 eivind Exp
   34  */
   35 
   36 #ifndef _ISA_PNPREG_H_
   37 #define _ISA_PNPREG_H_
   38 
   39 /* Maximum Number of PnP Devices.  8 should be plenty */
   40 #define PNP_MAX_CARDS 8
   41 
   42 /* Static ports to access PnP state machine */
   43 #ifdef PC98
   44 #define _PNP_ADDRESS            0x259
   45 #define _PNP_WRITE_DATA         0xa59
   46 #else
   47 #define _PNP_ADDRESS            0x279
   48 #define _PNP_WRITE_DATA         0xa79
   49 #endif
   50 
   51 /* PnP Registers.  Write to ADDRESS and then use WRITE/READ_DATA */
   52 #define PNP_SET_RD_DATA         0x00
   53         /***
   54         Writing to this location modifies the address of the port used for
   55         reading from the Plug and Play ISA cards.   Bits[7:0] become I/O
   56         read port address bits[9:2].  Reads from this register are ignored.
   57         ***/
   58 
   59 #define PNP_SERIAL_ISOLATION    0x01
   60         /***
   61         A read to this register causes a Plug and Play cards in the Isolation
   62         state to compare one bit of the boards ID.
   63         This register is read only.
   64         ***/
   65 
   66 #define PNP_CONFIG_CONTROL      0x02
   67 #define PNP_CONFIG_CONTROL_RESET_CSN    0x04
   68 #define PNP_CONFIG_CONTROL_WAIT_FOR_KEY 0x02
   69 #define PNP_CONFIG_CONTROL_RESET        0x01
   70         /***
   71         Bit[2]  Reset CSN to 0
   72         Bit[1]  Return to the Wait for Key state
   73         Bit[0]  Reset all logical devices and restore configuration
   74                 registers to their power-up values.
   75 
   76         A write to bit[0] of this register performs a reset function on
   77         all logical devices.  This resets the contents of configuration
   78         registers to  their default state.  All card's logical devices
   79         enter their default state and the CSN is preserved.
   80                       
   81         A write to bit[1] of this register causes all cards to enter the
   82         Wait for Key state but all CSNs are preserved and logical devices
   83         are not affected.
   84                             
   85         A write to bit[2] of this register causes all cards to reset their
   86         CSN to zero .
   87                           
   88         This register is write-only.  The values are not sticky, that is,
   89         hardware will automatically clear them and there is no need for
   90         software to clear the bits.
   91         ***/
   92 
   93 #define PNP_WAKE                0x03
   94         /***
   95         A write to this port will cause all cards that have a CSN that
   96         matches the write data[7:0] to go from the Sleep state to the either
   97         the Isolation state if the write data for this command is zero or
   98         the Config state if the write data is not zero.  Additionally, the
   99         pointer to the byte-serial device is reset.  This register is  
  100         writeonly.
  101         ***/
  102 
  103 #define PNP_RESOURCE_DATA       0x04
  104         /***
  105         A read from this address reads the next byte of resource information.
  106         The Status register must be polled until bit[0] is set before this
  107         register may be read.  This register is read only.
  108         ***/
  109 
  110 #define PNP_STATUS              0x05
  111         /***
  112         Bit[0] when set indicates it is okay to read the next data byte  
  113         from the Resource Data register.  This register is readonly.
  114         ***/
  115 
  116 #define PNP_SET_CSN             0x06
  117         /***
  118         A write to this port sets a card's CSN.  The CSN is a value uniquely
  119         assigned to each ISA card after the serial identification process
  120         so that each card may be individually selected during a Wake[CSN]
  121         command. This register is read/write. 
  122         ***/
  123 
  124 #define PNP_SET_LDN             0x07
  125         /***
  126         Selects the current logical device.  All reads and writes of memory,
  127         I/O, interrupt and DMA configuration information access the registers
  128         of the logical device written here.  In addition, the I/O Range
  129         Check and Activate  commands operate only on the selected logical
  130         device.  This register is read/write. If a card has only 1 logical
  131         device, this location should be a read-only value of 0x00.
  132         ***/
  133 
  134 /*** addresses 0x08 - 0x1F Card Level Reserved for future use ***/
  135 /*** addresses 0x20 - 0x2F Card Level, Vendor Defined ***/
  136 
  137 #define PNP_ACTIVATE            0x30
  138         /***
  139         For each logical device there is one activate register that controls
  140         whether or not the logical device is active on the ISA bus.  Bit[0],
  141         if set, activates the logical device.  Bits[7:1] are reserved and
  142         must return 0 on reads.  This is a read/write register. Before a
  143         logical device is activated, I/O range check must be disabled.
  144         ***/
  145 
  146 #define PNP_IO_RANGE_CHECK      0x31
  147 #define PNP_IO_RANGE_CHECK_ENABLE       0x02
  148 #define PNP_IO_RANGE_CHECK_READ_AS_55   0x01
  149         /***
  150         This register is used to perform a conflict check on the I/O port
  151         range programmed for use by a logical device.
  152 
  153         Bit[7:2]  Reserved and must return 0 on reads
  154         Bit[1]    Enable I/O Range check, if set then I/O Range Check
  155         is enabled. I/O range check is only valid when the logical
  156         device is inactive.
  157 
  158         Bit[0], if set, forces the logical device to respond to I/O reads
  159         of the logical device's assigned I/O range with a 0x55 when I/O
  160         range check is in operation.  If clear, the logical device drives
  161         0xAA.  This register is read/write.
  162         ***/
  163 
  164 /*** addr 0x32 - 0x37 Logical Device Control Reserved for future use ***/
  165 /*** addr 0x38 - 0x3F Logical Device Control Vendor Define ***/
  166 
  167 #define PNP_MEM_BASE_HIGH(i)    (0x40 + 8*(i))
  168 #define PNP_MEM_BASE_LOW(i)     (0x41 + 8*(i))
  169 #define PNP_MEM_CONTROL(i)      (0x42 * 8*(i))
  170 #define PNP_MEM_CONTROL_16BIT   0x2
  171 #define PNP_MEM_CONTROL_LIMIT   0x1
  172 #define PNP_MEM_RANGE_HIGH(i)   (0x43 + 8*(i))
  173 #define PNP_MEM_RANGE_LOW(i)    (0x44 + 8*(i))
  174         /***
  175         Four memory resource registers per range, four ranges.
  176         Fill with 0 if no ranges are enabled.
  177 
  178         Offset 0:       RW Memory base address bits[23:16]
  179         Offset 1:       RW Memory base address bits[15:8]
  180         Offset 2:       Memory control
  181             Bit[1] specifies 8/16-bit control.  This bit is set to indicate
  182             16-bit memory, and cleared to indicate 8-bit memory.
  183             Bit[0], if cleared, indicates the next field can be used as a range
  184             length for decode (implies range length and base alignment of memory
  185             descriptor are equal).
  186             Bit[0], if set, indicates the next field is the upper limit for
  187             the address. -  - Bit[0] is read-only.
  188         Offset 3:       RW upper limit or range len, bits[23:16]
  189         Offset 4:       RW upper limit or range len, bits[15:8]
  190         Offset 5-Offset 7: filler, unused.
  191         ***/
  192 
  193 #define PNP_IO_BASE_HIGH(i)     (0x60 + 2*(i))
  194 #define PNP_IO_BASE_LOW(i)      (0x61 + 2*(i))
  195         /***
  196         Eight ranges, two bytes per range.
  197         Offset 0:               I/O port base address bits[15:8]
  198         Offset 1:               I/O port base address bits[7:0]
  199         ***/
  200 
  201 #define PNP_IRQ_LEVEL(i)        (0x70 + 2*(i))
  202 #define PNP_IRQ_TYPE(i)         (0x71 + 2*(i))
  203         /***
  204         Two entries, two bytes per entry.
  205         Offset 0:       RW interrupt level (1..15, 0=unused).
  206         Offset 1:       Bit[1]: level(1:hi, 0:low),
  207                         Bit[0]: type (1:level, 0:edge)
  208                 byte 1 can be readonly if 1 type of int is used.
  209         ***/
  210 
  211 #define PNP_DMA_CHANNEL(i)      (0x74 + 1*(i))
  212         /***
  213         Two entries, one byte per entry. Bits[2:0] select
  214         which DMA channel is in use for DMA 0.  Zero selects DMA channel
  215         0, seven selects DMA channel 7. DMA channel 4, the cascade channel
  216         is used to indicate no DMA channel is active.
  217         ***/
  218 
  219 /*** 32-bit memory accesses are at 0x76 ***/
  220 
  221 /* Macros to parse Resource IDs */
  222 #define PNP_RES_TYPE(a)         (a >> 7)
  223 #define PNP_SRES_NUM(a)         (a >> 3)
  224 #define PNP_SRES_LEN(a)         (a & 0x07)
  225 #define PNP_LRES_NUM(a)         (a & 0x7f)
  226 
  227 /* Small Resource Item names */
  228 #define PNP_TAG_VERSION         0x1
  229 #define PNP_TAG_LOGICAL_DEVICE  0x2
  230 #define PNP_TAG_COMPAT_DEVICE   0x3
  231 #define PNP_TAG_IRQ_FORMAT      0x4
  232 #define PNP_TAG_DMA_FORMAT      0x5
  233 #define PNP_TAG_START_DEPENDANT 0x6
  234 #define PNP_TAG_END_DEPENDANT   0x7
  235 #define PNP_TAG_IO_RANGE        0x8
  236 #define PNP_TAG_IO_FIXED        0x9
  237 #define PNP_TAG_RESERVED        0xa-0xd
  238 #define PNP_TAG_VENDOR          0xe
  239 #define PNP_TAG_END             0xf
  240 
  241 /* Large Resource Item names */
  242 #define PNP_TAG_MEMORY_RANGE    0x1
  243 #define PNP_TAG_ID_ANSI         0x2
  244 #define PNP_TAG_ID_UNICODE      0x3
  245 #define PNP_TAG_LARGE_VENDOR    0x4
  246 #define PNP_TAG_MEMORY32_RANGE  0x5
  247 #define PNP_TAG_MEMORY32_FIXED  0x6
  248 #define PNP_TAG_LARGE_RESERVED  0x7-0x7f
  249 
  250 #endif /* !_ISA_PNPREG_H_ */

Cache object: 1cf9a24b0f9adb1d6f63cb2e7ca6888f


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]


This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.