1 /*-
2 * Copyright (c) 2008 Sam Leffler. All rights reserved.
3 *
4 * Redistribution and use in source and binary forms, with or without
5 * modification, are permitted provided that the following conditions
6 * are met:
7 * 1. Redistributions of source code must retain the above copyright
8 * notice, this list of conditions and the following disclaimer.
9 * 2. Redistributions in binary form must reproduce the above copyright
10 * notice, this list of conditions and the following disclaimer in the
11 * documentation and/or other materials provided with the distribution.
12 *
13 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
14 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
15 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
16 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
17 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
18 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
19 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
20 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
21 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
22 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
23 */
24
25 /*
26 * AR71XX attachment driver for the USB Enhanced Host Controller.
27 */
28
29 #include <sys/cdefs.h>
30 __FBSDID("$FreeBSD: releng/10.1/sys/mips/atheros/ar71xx_ehci.c 265999 2014-05-14 01:35:43Z ian $");
31
32 #include "opt_bus.h"
33
34 #include <sys/param.h>
35 #include <sys/systm.h>
36 #include <sys/bus.h>
37 #include <sys/rman.h>
38 #include <sys/condvar.h>
39 #include <sys/kernel.h>
40 #include <sys/module.h>
41
42 #include <machine/bus.h>
43
44 #include <dev/usb/usb.h>
45 #include <dev/usb/usbdi.h>
46
47 #include <dev/usb/usb_core.h>
48 #include <dev/usb/usb_busdma.h>
49 #include <dev/usb/usb_process.h>
50 #include <dev/usb/usb_util.h>
51
52 #include <dev/usb/usb_controller.h>
53 #include <dev/usb/usb_bus.h>
54 #include <dev/usb/controller/ehci.h>
55 #include <dev/usb/controller/ehcireg.h>
56
57 #include <mips/atheros/ar71xx_setup.h>
58 #include <mips/atheros/ar71xx_bus_space_reversed.h>
59
60 #define EHCI_HC_DEVSTR "AR71XX Integrated USB 2.0 controller"
61
62 struct ar71xx_ehci_softc {
63 ehci_softc_t base; /* storage for EHCI code */
64 };
65
66 static device_attach_t ar71xx_ehci_attach;
67 static device_detach_t ar71xx_ehci_detach;
68
69 bs_r_1_proto(reversed);
70 bs_w_1_proto(reversed);
71
72 static int
73 ar71xx_ehci_probe(device_t self)
74 {
75
76 device_set_desc(self, EHCI_HC_DEVSTR);
77
78 return (BUS_PROBE_NOWILDCARD);
79 }
80
81 static int
82 ar71xx_ehci_attach(device_t self)
83 {
84 struct ar71xx_ehci_softc *isc = device_get_softc(self);
85 ehci_softc_t *sc = &isc->base;
86 int err;
87 int rid;
88
89 /* initialise some bus fields */
90 sc->sc_bus.parent = self;
91 sc->sc_bus.devices = sc->sc_devices;
92 sc->sc_bus.devices_max = EHCI_MAX_DEVICES;
93
94 /* get all DMA memory */
95 if (usb_bus_mem_alloc_all(&sc->sc_bus,
96 USB_GET_DMA_TAG(self), &ehci_iterate_hw_softc)) {
97 return (ENOMEM);
98 }
99
100 sc->sc_bus.usbrev = USB_REV_2_0;
101
102 /* NB: hints fix the memory location and irq */
103
104 rid = 0;
105 sc->sc_io_res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid, RF_ACTIVE);
106 if (!sc->sc_io_res) {
107 device_printf(self, "Could not map memory\n");
108 goto error;
109 }
110
111 /*
112 * Craft special resource for bus space ops that handle
113 * byte-alignment of non-word addresses.
114 */
115 sc->sc_io_tag = ar71xx_bus_space_reversed;
116 sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res);
117 sc->sc_io_size = rman_get_size(sc->sc_io_res);
118
119 rid = 0;
120 sc->sc_irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ, &rid,
121 RF_ACTIVE);
122 if (sc->sc_irq_res == NULL) {
123 device_printf(self, "Could not allocate irq\n");
124 goto error;
125 }
126 sc->sc_bus.bdev = device_add_child(self, "usbus", -1);
127 if (!sc->sc_bus.bdev) {
128 device_printf(self, "Could not add USB device\n");
129 goto error;
130 }
131 device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus);
132 device_set_desc(sc->sc_bus.bdev, EHCI_HC_DEVSTR);
133
134 sprintf(sc->sc_vendor, "Atheros");
135
136
137 err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
138 NULL, (driver_intr_t *)ehci_interrupt, sc, &sc->sc_intr_hdl);
139 if (err) {
140 device_printf(self, "Could not setup irq, %d\n", err);
141 sc->sc_intr_hdl = NULL;
142 goto error;
143 }
144
145 /*
146 * Arrange to force Host mode, select big-endian byte alignment,
147 * and arrange to not terminate reset operations (the adapter
148 * will ignore it if we do but might as well save a reg write).
149 * Also, the controller has an embedded Transaction Translator
150 * which means port speed must be read from the Port Status
151 * register following a port enable.
152 */
153 sc->sc_flags = EHCI_SCFLG_SETMODE;
154
155 switch (ar71xx_soc) {
156 case AR71XX_SOC_AR7241:
157 case AR71XX_SOC_AR7242:
158 case AR71XX_SOC_AR9130:
159 case AR71XX_SOC_AR9132:
160 case AR71XX_SOC_AR9330:
161 case AR71XX_SOC_AR9331:
162 sc->sc_flags |= EHCI_SCFLG_TT | EHCI_SCFLG_NORESTERM;
163 break;
164 default:
165 /* fallthrough */
166 break;
167 }
168
169 /*
170 * ehci_reset() needs the correct offset to access the host controller
171 * registers. The AR724x/AR913x offsets aren't 0.
172 */
173 sc->sc_offs = EHCI_CAPLENGTH(EREAD4(sc, EHCI_CAPLEN_HCIVERSION));
174
175
176 (void) ehci_reset(sc);
177
178 err = ehci_init(sc);
179 if (!err) {
180 err = device_probe_and_attach(sc->sc_bus.bdev);
181 }
182 if (err) {
183 device_printf(self, "USB init failed err=%d\n", err);
184 goto error;
185 }
186 return (0);
187
188 error:
189 ar71xx_ehci_detach(self);
190 return (ENXIO);
191 }
192
193 static int
194 ar71xx_ehci_detach(device_t self)
195 {
196 struct ar71xx_ehci_softc *isc = device_get_softc(self);
197 ehci_softc_t *sc = &isc->base;
198 device_t bdev;
199 int err;
200
201 if (sc->sc_bus.bdev) {
202 bdev = sc->sc_bus.bdev;
203 device_detach(bdev);
204 device_delete_child(self, bdev);
205 }
206 /* during module unload there are lots of children leftover */
207 device_delete_children(self);
208
209 if (sc->sc_irq_res && sc->sc_intr_hdl) {
210 /*
211 * only call ehci_detach() after ehci_init()
212 */
213 ehci_detach(sc);
214
215 err = bus_teardown_intr(self, sc->sc_irq_res, sc->sc_intr_hdl);
216
217 if (err)
218 /* XXX or should we panic? */
219 device_printf(self, "Could not tear down irq, %d\n",
220 err);
221 sc->sc_intr_hdl = NULL;
222 }
223
224 if (sc->sc_irq_res) {
225 bus_release_resource(self, SYS_RES_IRQ, 0, sc->sc_irq_res);
226 sc->sc_irq_res = NULL;
227 }
228 if (sc->sc_io_res) {
229 bus_release_resource(self, SYS_RES_MEMORY, 0,
230 sc->sc_io_res);
231 sc->sc_io_res = NULL;
232 }
233 usb_bus_mem_free_all(&sc->sc_bus, &ehci_iterate_hw_softc);
234
235 return (0);
236 }
237
238 static device_method_t ehci_methods[] = {
239 /* Device interface */
240 DEVMETHOD(device_probe, ar71xx_ehci_probe),
241 DEVMETHOD(device_attach, ar71xx_ehci_attach),
242 DEVMETHOD(device_detach, ar71xx_ehci_detach),
243 DEVMETHOD(device_suspend, bus_generic_suspend),
244 DEVMETHOD(device_resume, bus_generic_resume),
245 DEVMETHOD(device_shutdown, bus_generic_shutdown),
246
247 DEVMETHOD_END
248 };
249
250 static driver_t ehci_driver = {
251 .name = "ehci",
252 .methods = ehci_methods,
253 .size = sizeof(struct ar71xx_ehci_softc),
254 };
255
256 static devclass_t ehci_devclass;
257
258 DRIVER_MODULE(ehci, nexus, ehci_driver, ehci_devclass, 0, 0);
259 MODULE_DEPEND(ehci, usb, 1, 1, 1);
Cache object: 18986c325fbd497d265c30f9c7544e15
|