qca955x_chip.c

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
    1 /*-
    2  * Copyright (c) 2015 Adrian Chadd <adrian@FreeBSD.org>
    3  * All rights reserved.
    4  *
    5  * Redistribution and use in source and binary forms, with or without
    6  * modification, are permitted provided that the following conditions
    7  * are met:
    8  * 1. Redistributions of source code must retain the above copyright
    9  *    notice, this list of conditions and the following disclaimer.
   10  * 2. Redistributions in binary form must reproduce the above copyright
   11  *    notice, this list of conditions and the following disclaimer in the
   12  *    documentation and/or other materials provided with the distribution.
   13  *
   14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
   15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
   16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
   17  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
   18  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
   19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
   20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
   21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
   22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
   23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
   24  * SUCH DAMAGE.
   25  */
   26 
   27 #include <sys/cdefs.h>
   28 __FBSDID("$FreeBSD: releng/12.0/sys/mips/atheros/qca955x_chip.c 298848 2016-04-30 14:41:18Z pfg $");
   29 
   30 #include "opt_ddb.h"
   31 
   32 #include <sys/param.h>
   33 #include <sys/conf.h>
   34 #include <sys/kernel.h>
   35 #include <sys/systm.h>
   36 #include <sys/bus.h>
   37 #include <sys/cons.h>
   38 #include <sys/kdb.h>
   39 #include <sys/reboot.h>
   40 
   41 #include <vm/vm.h>
   42 #include <vm/vm_page.h>
   43 
   44 #include <net/ethernet.h>
   45 
   46 #include <machine/clock.h>
   47 #include <machine/cpu.h>
   48 #include <machine/cpuregs.h>
   49 #include <machine/hwfunc.h>
   50 #include <machine/md_var.h>
   51 #include <machine/trap.h>
   52 #include <machine/vmparam.h>
   53 
   54 #include <mips/atheros/ar71xxreg.h>
   55 //#include <mips/atheros/ar934xreg.h>
   56 #include <mips/atheros/qca955xreg.h>
   57 
   58 #include <mips/atheros/ar71xx_cpudef.h>
   59 #include <mips/atheros/ar71xx_setup.h>
   60 
   61 #include <mips/atheros/ar71xx_chip.h>
   62 
   63 #include <mips/atheros/qca955x_chip.h>
   64 
   65 static void
   66 qca955x_chip_detect_mem_size(void)
   67 {
   68 }
   69 
   70 static void
   71 qca955x_chip_detect_sys_frequency(void)
   72 {
   73         unsigned long ref_rate;
   74         unsigned long cpu_rate;
   75         unsigned long ddr_rate;
   76         unsigned long ahb_rate;
   77         uint32_t pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
   78         uint32_t cpu_pll, ddr_pll;
   79         uint32_t bootstrap;
   80 
   81         bootstrap = ATH_READ_REG(QCA955X_RESET_REG_BOOTSTRAP);
   82         if (bootstrap & QCA955X_BOOTSTRAP_REF_CLK_40)
   83                 ref_rate = 40 * 1000 * 1000;
   84         else
   85                 ref_rate = 25 * 1000 * 1000;
   86 
   87         pll = ATH_READ_REG(QCA955X_PLL_CPU_CONFIG_REG);
   88         out_div = (pll >> QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
   89                   QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK;
   90         ref_div = (pll >> QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
   91                   QCA955X_PLL_CPU_CONFIG_REFDIV_MASK;
   92         nint = (pll >> QCA955X_PLL_CPU_CONFIG_NINT_SHIFT) &
   93                QCA955X_PLL_CPU_CONFIG_NINT_MASK;
   94         frac = (pll >> QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
   95                QCA955X_PLL_CPU_CONFIG_NFRAC_MASK;
   96 
   97         cpu_pll = nint * ref_rate / ref_div;
   98         cpu_pll += frac * ref_rate / (ref_div * (1 << 6));
   99         cpu_pll /= (1 << out_div);
  100 
  101         pll = ATH_READ_REG(QCA955X_PLL_DDR_CONFIG_REG);
  102         out_div = (pll >> QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
  103                   QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK;
  104         ref_div = (pll >> QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
  105                   QCA955X_PLL_DDR_CONFIG_REFDIV_MASK;
  106         nint = (pll >> QCA955X_PLL_DDR_CONFIG_NINT_SHIFT) &
  107                QCA955X_PLL_DDR_CONFIG_NINT_MASK;
  108         frac = (pll >> QCA955X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
  109                QCA955X_PLL_DDR_CONFIG_NFRAC_MASK;
  110 
  111         ddr_pll = nint * ref_rate / ref_div;
  112         ddr_pll += frac * ref_rate / (ref_div * (1 << 10));
  113         ddr_pll /= (1 << out_div);
  114 
  115         clk_ctrl = ATH_READ_REG(QCA955X_PLL_CLK_CTRL_REG);
  116 
  117         postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
  118                   QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
  119 
  120         if (clk_ctrl & QCA955X_PLL_CLK_CTRL_CPU_PLL_BYPASS)
  121                 cpu_rate = ref_rate;
  122         else if (clk_ctrl & QCA955X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL)
  123                 cpu_rate = ddr_pll / (postdiv + 1);
  124         else
  125                 cpu_rate = cpu_pll / (postdiv + 1);
  126 
  127         postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) &
  128                   QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_MASK;
  129 
  130         if (clk_ctrl & QCA955X_PLL_CLK_CTRL_DDR_PLL_BYPASS)
  131                 ddr_rate = ref_rate;
  132         else if (clk_ctrl & QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL)
  133                 ddr_rate = cpu_pll / (postdiv + 1);
  134         else
  135                 ddr_rate = ddr_pll / (postdiv + 1);
  136 
  137         postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) &
  138                   QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_MASK;
  139 
  140         if (clk_ctrl & QCA955X_PLL_CLK_CTRL_AHB_PLL_BYPASS)
  141                 ahb_rate = ref_rate;
  142         else if (clk_ctrl & QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL)
  143                 ahb_rate = ddr_pll / (postdiv + 1);
  144         else
  145                 ahb_rate = cpu_pll / (postdiv + 1);
  146 
  147         u_ar71xx_ddr_freq = ddr_rate;
  148         u_ar71xx_cpu_freq = cpu_rate;
  149         u_ar71xx_ahb_freq = ahb_rate;
  150 
  151         u_ar71xx_wdt_freq = ref_rate;
  152         u_ar71xx_uart_freq = ref_rate;
  153         u_ar71xx_mdio_freq = ref_rate;
  154         u_ar71xx_refclk = ref_rate;
  155 }
  156 
  157 static void
  158 qca955x_chip_device_stop(uint32_t mask)
  159 {
  160         uint32_t reg;
  161 
  162         reg = ATH_READ_REG(QCA955X_RESET_REG_RESET_MODULE);
  163         ATH_WRITE_REG(QCA955X_RESET_REG_RESET_MODULE, reg | mask);
  164 }
  165 
  166 static void
  167 qca955x_chip_device_start(uint32_t mask)
  168 {
  169         uint32_t reg;
  170 
  171         reg = ATH_READ_REG(QCA955X_RESET_REG_RESET_MODULE);
  172         ATH_WRITE_REG(QCA955X_RESET_REG_RESET_MODULE, reg & ~mask);
  173 }
  174 
  175 static int
  176 qca955x_chip_device_stopped(uint32_t mask)
  177 {
  178         uint32_t reg;
  179 
  180         reg = ATH_READ_REG(QCA955X_RESET_REG_RESET_MODULE);
  181         return ((reg & mask) == mask);
  182 }
  183 
  184 static void
  185 qca955x_chip_set_mii_speed(uint32_t unit, uint32_t speed)
  186 {
  187 
  188         /* XXX TODO */
  189         return;
  190 }
  191 
  192 static void
  193 qca955x_chip_set_pll_ge(int unit, int speed, uint32_t pll)
  194 {
  195         switch (unit) {
  196         case 0:
  197                 ATH_WRITE_REG(QCA955X_PLL_ETH_XMII_CONTROL_REG, pll);
  198                 break;
  199         case 1:
  200                 ATH_WRITE_REG(QCA955X_PLL_ETH_SGMII_CONTROL_REG, pll);
  201                 break;
  202         default:
  203                 printf("%s: invalid PLL set for arge unit: %d\n",
  204                     __func__, unit);
  205                 return;
  206         }
  207 }
  208 
  209 static void
  210 qca955x_chip_ddr_flush(ar71xx_flush_ddr_id_t id)
  211 {
  212 
  213         switch (id) {
  214         case AR71XX_CPU_DDR_FLUSH_GE0:
  215                 ar71xx_ddr_flush(QCA955X_DDR_REG_FLUSH_GE0);
  216                 break;
  217         case AR71XX_CPU_DDR_FLUSH_GE1:
  218                 ar71xx_ddr_flush(QCA955X_DDR_REG_FLUSH_GE1);
  219                 break;
  220         case AR71XX_CPU_DDR_FLUSH_USB:
  221                 ar71xx_ddr_flush(QCA955X_DDR_REG_FLUSH_USB);
  222                 break;
  223         case AR71XX_CPU_DDR_FLUSH_PCIE:
  224                 ar71xx_ddr_flush(QCA955X_DDR_REG_FLUSH_PCIE);
  225                 break;
  226         case AR71XX_CPU_DDR_FLUSH_WMAC:
  227                 ar71xx_ddr_flush(QCA955X_DDR_REG_FLUSH_WMAC);
  228                 break;
  229         case AR71XX_CPU_DDR_FLUSH_PCIE_EP:
  230                 ar71xx_ddr_flush(QCA955X_DDR_REG_FLUSH_SRC1);
  231                 break;
  232         case AR71XX_CPU_DDR_FLUSH_CHECKSUM:
  233                 ar71xx_ddr_flush(QCA955X_DDR_REG_FLUSH_SRC2);
  234                 break;
  235         default:
  236                 printf("%s: invalid flush (%d)\n", __func__, id);
  237         }
  238 }
  239 
  240 static uint32_t
  241 qca955x_chip_get_eth_pll(unsigned int mac, int speed)
  242 {
  243         uint32_t pll;
  244 
  245         switch (speed) {
  246         case 10:
  247                 pll = QCA955X_PLL_VAL_10;
  248                 break;
  249         case 100:
  250                 pll = QCA955X_PLL_VAL_100;
  251                 break;
  252         case 1000:
  253                 pll = QCA955X_PLL_VAL_1000;
  254                 break;
  255         default:
  256                 printf("%s%d: invalid speed %d\n", __func__, mac, speed);
  257                 pll = 0;
  258         }
  259         return (pll);
  260 }
  261 
  262 static void
  263 qca955x_chip_reset_ethernet_switch(void)
  264 {
  265 #if 0
  266         ar71xx_device_stop(AR934X_RESET_ETH_SWITCH);
  267         DELAY(100);
  268         ar71xx_device_start(AR934X_RESET_ETH_SWITCH);
  269         DELAY(100);
  270 #endif
  271 }
  272 
  273 static void
  274 qca955x_configure_gmac(uint32_t gmac_cfg)
  275 {
  276         uint32_t reg;
  277 
  278         reg = ATH_READ_REG(QCA955X_GMAC_REG_ETH_CFG);
  279         printf("%s: ETH_CFG=0x%08x\n", __func__, reg);
  280         reg &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII);
  281         reg |= gmac_cfg;
  282         ATH_WRITE_REG(QCA955X_GMAC_REG_ETH_CFG, reg);
  283 }
  284 
  285 static void
  286 qca955x_chip_init_usb_peripheral(void)
  287 {
  288 }
  289 
  290 static void
  291 qca955x_chip_set_mii_if(uint32_t unit, uint32_t mii_mode)
  292 {
  293 
  294         /*
  295          * XXX !
  296          *
  297          * Nothing to see here; although gmac0 can have its
  298          * MII configuration changed, the register values
  299          * are slightly different.
  300          */
  301 }
  302 
  303 /*
  304  * XXX TODO: fetch default MII divider configuration
  305  */
  306 
  307 static void
  308 qca955x_chip_reset_wmac(void)
  309 {
  310 
  311         /* XXX TODO */
  312 }
  313 
  314 static void
  315 qca955x_chip_init_gmac(void)
  316 {
  317         long gmac_cfg;
  318 
  319         if (resource_long_value("qca955x_gmac", 0, "gmac_cfg",
  320             &gmac_cfg) == 0) {
  321                 printf("%s: gmac_cfg=0x%08lx\n",
  322                     __func__,
  323                     (long) gmac_cfg);
  324                 qca955x_configure_gmac((uint32_t) gmac_cfg);
  325         }
  326 }
  327 
  328 /*
  329  * Reset the NAND Flash Controller.
  330  *
  331  * + active=1 means "make it active".
  332  * + active=0 means "make it inactive".
  333  */
  334 static void
  335 qca955x_chip_reset_nfc(int active)
  336 {
  337 #if 0
  338         if (active) {
  339                 ar71xx_device_start(AR934X_RESET_NANDF);
  340                 DELAY(100);
  341 
  342                 ar71xx_device_start(AR934X_RESET_ETH_SWITCH_ANALOG);
  343                 DELAY(250);
  344         } else {
  345                 ar71xx_device_stop(AR934X_RESET_ETH_SWITCH_ANALOG);
  346                 DELAY(250);
  347 
  348                 ar71xx_device_stop(AR934X_RESET_NANDF);
  349                 DELAY(100);
  350         }
  351 #endif
  352 }
  353 
  354 /*
  355  * Configure the GPIO output mux setup.
  356  *
  357  * The QCA955x has an output mux which allowed
  358  * certain functions to be configured on any pin.
  359  * Specifically, the switch PHY link LEDs and
  360  * WMAC external RX LNA switches are not limited to
  361  * a specific GPIO pin.
  362  */
  363 static void
  364 qca955x_chip_gpio_output_configure(int gpio, uint8_t func)
  365 {
  366         uint32_t reg, s;
  367         uint32_t t;
  368 
  369         if (gpio > QCA955X_GPIO_COUNT)
  370                 return;
  371 
  372         reg = QCA955X_GPIO_REG_OUT_FUNC0 + rounddown(gpio, 4);
  373         s = 8 * (gpio % 4);
  374 
  375         /* read-modify-write */
  376         t = ATH_READ_REG(AR71XX_GPIO_BASE + reg);
  377         t &= ~(0xff << s);
  378         t |= func << s;
  379         ATH_WRITE_REG(AR71XX_GPIO_BASE + reg, t);
  380 
  381         /* flush write */
  382         ATH_READ_REG(AR71XX_GPIO_BASE + reg);
  383 }
  384 
  385 struct ar71xx_cpu_def qca955x_chip_def = {
  386         &qca955x_chip_detect_mem_size,
  387         &qca955x_chip_detect_sys_frequency,
  388         &qca955x_chip_device_stop,
  389         &qca955x_chip_device_start,
  390         &qca955x_chip_device_stopped,
  391         &qca955x_chip_set_pll_ge,
  392         &qca955x_chip_set_mii_speed,
  393         &qca955x_chip_set_mii_if,
  394         &qca955x_chip_get_eth_pll,
  395         &qca955x_chip_ddr_flush,
  396         &qca955x_chip_init_usb_peripheral,
  397         &qca955x_chip_reset_ethernet_switch,
  398         &qca955x_chip_reset_wmac,
  399         &qca955x_chip_init_gmac,
  400         &qca955x_chip_reset_nfc,
  401         &qca955x_chip_gpio_output_configure,
  402 };
Cache object: 4d5aae62c2386feeb724875bf564ba5b
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.
FreeBSD/Linux Kernel Cross Reference sys/mips/atheros/qca955x_chip.c

FreeBSD/Linux Kernel Cross Reference
sys/mips/atheros/qca955x_chip.c
