1 /*-
2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
3 *
4 * Copyright (c) 2010-2011 Juli Mallett <jmallett@FreeBSD.org>
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 *
16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26 * SUCH DAMAGE.
27 *
28 * $FreeBSD$
29 */
30
31 #include <sys/cdefs.h>
32 __FBSDID("$FreeBSD$");
33
34 #include <sys/param.h>
35 #include <sys/systm.h>
36
37 #include <sys/bus.h>
38 #include <sys/endian.h>
39 #include <sys/interrupt.h>
40 #include <sys/malloc.h>
41 #include <sys/kernel.h>
42 #include <sys/module.h>
43 #include <sys/rman.h>
44
45 #include <vm/vm.h>
46 #include <vm/pmap.h>
47 #include <vm/vm_extern.h>
48
49 #include <machine/bus.h>
50 #include <machine/cpu.h>
51
52 #include <contrib/octeon-sdk/cvmx.h>
53 #include <mips/cavium/octeon_irq.h>
54 #include <contrib/octeon-sdk/cvmx-pcie.h>
55
56 #include <dev/pci/pcireg.h>
57 #include <dev/pci/pcivar.h>
58
59 #include <dev/pci/pcib_private.h>
60
61 #include <mips/cavium/octopcireg.h>
62 #include <mips/cavium/octopcivar.h>
63
64 #include "pcib_if.h"
65
66 #define NPI_WRITE(addr, value) cvmx_write64_uint32((addr) ^ 4, (value))
67 #define NPI_READ(addr) cvmx_read64_uint32((addr) ^ 4)
68
69 struct octopci_softc {
70 device_t sc_dev;
71
72 unsigned sc_domain;
73 unsigned sc_bus;
74
75 bus_addr_t sc_io_base;
76 unsigned sc_io_next;
77 struct rman sc_io;
78
79 bus_addr_t sc_mem1_base;
80 unsigned sc_mem1_next;
81 struct rman sc_mem1;
82 };
83
84 static void octopci_identify(driver_t *, device_t);
85 static int octopci_probe(device_t);
86 static int octopci_attach(device_t);
87 static int octopci_read_ivar(device_t, device_t, int,
88 uintptr_t *);
89 static struct resource *octopci_alloc_resource(device_t, device_t, int, int *,
90 rman_res_t, rman_res_t,
91 rman_res_t, u_int);
92 static int octopci_activate_resource(device_t, device_t, int, int,
93 struct resource *);
94 static int octopci_maxslots(device_t);
95 static uint32_t octopci_read_config(device_t, u_int, u_int, u_int, u_int, int);
96 static void octopci_write_config(device_t, u_int, u_int, u_int, u_int,
97 uint32_t, int);
98 static int octopci_route_interrupt(device_t, device_t, int);
99
100 static unsigned octopci_init_bar(device_t, unsigned, unsigned, unsigned, unsigned, uint8_t *);
101 static unsigned octopci_init_device(device_t, unsigned, unsigned, unsigned, unsigned);
102 static unsigned octopci_init_bus(device_t, unsigned);
103 static void octopci_init_pci(device_t);
104 static uint64_t octopci_cs_addr(unsigned, unsigned, unsigned, unsigned);
105
106 static void
107 octopci_identify(driver_t *drv, device_t parent)
108 {
109 BUS_ADD_CHILD(parent, 0, "pcib", 0);
110 if (octeon_has_feature(OCTEON_FEATURE_PCIE))
111 BUS_ADD_CHILD(parent, 0, "pcib", 1);
112 }
113
114 static int
115 octopci_probe(device_t dev)
116 {
117 if (octeon_has_feature(OCTEON_FEATURE_PCIE)) {
118 device_set_desc(dev, "Cavium Octeon PCIe bridge");
119 return (0);
120 }
121
122 /* Check whether we are a PCI host. */
123 if ((cvmx_sysinfo_get()->bootloader_config_flags & CVMX_BOOTINFO_CFG_FLAG_PCI_HOST) == 0)
124 return (ENXIO);
125
126 if (device_get_unit(dev) != 0)
127 return (ENXIO);
128
129 device_set_desc(dev, "Cavium Octeon PCI bridge");
130 return (0);
131 }
132
133 static int
134 octopci_attach(device_t dev)
135 {
136 struct octopci_softc *sc;
137 unsigned subbus;
138 int error;
139
140 sc = device_get_softc(dev);
141 sc->sc_dev = dev;
142
143 if (octeon_has_feature(OCTEON_FEATURE_PCIE)) {
144 sc->sc_domain = device_get_unit(dev);
145
146 error = cvmx_pcie_rc_initialize(sc->sc_domain);
147 if (error != 0) {
148 device_printf(dev, "Failed to put PCIe bus in host mode.\n");
149 return (ENXIO);
150 }
151
152 /*
153 * In RC mode, the Simple Executive programs the first bus to
154 * be numbered as bus 1, because some IDT bridges used in
155 * Octeon systems object to being attached to bus 0.
156 */
157 sc->sc_bus = 1;
158
159 sc->sc_io_base = CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address(sc->sc_domain));
160 sc->sc_io.rm_descr = "Cavium Octeon PCIe I/O Ports";
161
162 sc->sc_mem1_base = CVMX_ADD_IO_SEG(cvmx_pcie_get_mem_base_address(sc->sc_domain));
163 sc->sc_mem1.rm_descr = "Cavium Octeon PCIe Memory";
164 } else {
165 octopci_init_pci(dev);
166
167 sc->sc_domain = 0;
168 sc->sc_bus = 0;
169
170 sc->sc_io_base = CVMX_ADDR_DID(CVMX_FULL_DID(CVMX_OCT_DID_PCI, CVMX_OCT_SUBDID_PCI_IO));
171 sc->sc_io.rm_descr = "Cavium Octeon PCI I/O Ports";
172
173 sc->sc_mem1_base = CVMX_ADDR_DID(CVMX_FULL_DID(CVMX_OCT_DID_PCI, CVMX_OCT_SUBDID_PCI_MEM1));
174 sc->sc_mem1.rm_descr = "Cavium Octeon PCI Memory";
175 }
176
177 sc->sc_io.rm_type = RMAN_ARRAY;
178 error = rman_init(&sc->sc_io);
179 if (error != 0)
180 return (error);
181
182 error = rman_manage_region(&sc->sc_io, CVMX_OCT_PCI_IO_BASE,
183 CVMX_OCT_PCI_IO_BASE + CVMX_OCT_PCI_IO_SIZE);
184 if (error != 0)
185 return (error);
186
187 sc->sc_mem1.rm_type = RMAN_ARRAY;
188 error = rman_init(&sc->sc_mem1);
189 if (error != 0)
190 return (error);
191
192 error = rman_manage_region(&sc->sc_mem1, CVMX_OCT_PCI_MEM1_BASE,
193 CVMX_OCT_PCI_MEM1_BASE + CVMX_OCT_PCI_MEM1_SIZE);
194 if (error != 0)
195 return (error);
196
197 /*
198 * Next offsets for resource allocation in octopci_init_bar.
199 */
200 sc->sc_io_next = 0;
201 sc->sc_mem1_next = 0;
202
203 /*
204 * Configure devices.
205 */
206 octopci_write_config(dev, sc->sc_bus, 0, 0, PCIR_SUBBUS_1, 0xff, 1);
207 subbus = octopci_init_bus(dev, sc->sc_bus);
208 octopci_write_config(dev, sc->sc_bus, 0, 0, PCIR_SUBBUS_1, subbus, 1);
209
210 device_add_child(dev, "pci", -1);
211
212 return (bus_generic_attach(dev));
213 }
214
215 static int
216 octopci_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
217 {
218 struct octopci_softc *sc;
219
220 sc = device_get_softc(dev);
221
222 switch (which) {
223 case PCIB_IVAR_DOMAIN:
224 *result = sc->sc_domain;
225 return (0);
226 case PCIB_IVAR_BUS:
227 *result = sc->sc_bus;
228 return (0);
229
230 }
231 return (ENOENT);
232 }
233
234 static struct resource *
235 octopci_alloc_resource(device_t bus, device_t child, int type, int *rid,
236 rman_res_t start, rman_res_t end, rman_res_t count, u_int flags)
237 {
238 struct octopci_softc *sc;
239 struct resource *res;
240 struct rman *rm;
241 int error;
242
243 sc = device_get_softc(bus);
244
245 switch (type) {
246 case SYS_RES_IRQ:
247 res = bus_generic_alloc_resource(bus, child, type, rid, start,
248 end, count, flags);
249 if (res != NULL)
250 return (res);
251 return (NULL);
252 case SYS_RES_MEMORY:
253 rm = &sc->sc_mem1;
254 break;
255 case SYS_RES_IOPORT:
256 rm = &sc->sc_io;
257 break;
258 default:
259 return (NULL);
260 }
261
262 res = rman_reserve_resource(rm, start, end, count, flags, child);
263 if (res == NULL)
264 return (NULL);
265
266 rman_set_rid(res, *rid);
267 rman_set_bustag(res, octopci_bus_space);
268
269 switch (type) {
270 case SYS_RES_MEMORY:
271 rman_set_bushandle(res, sc->sc_mem1_base + rman_get_start(res));
272 break;
273 case SYS_RES_IOPORT:
274 rman_set_bushandle(res, sc->sc_io_base + rman_get_start(res));
275 #if __mips_n64
276 rman_set_virtual(res, (void *)rman_get_bushandle(res));
277 #else
278 /*
279 * XXX
280 * We can't access ports via a 32-bit pointer.
281 */
282 rman_set_virtual(res, NULL);
283 #endif
284 break;
285 }
286
287 if ((flags & RF_ACTIVE) != 0) {
288 error = bus_activate_resource(child, type, *rid, res);
289 if (error != 0) {
290 rman_release_resource(res);
291 return (NULL);
292 }
293 }
294
295 return (res);
296 }
297
298 static int
299 octopci_activate_resource(device_t bus, device_t child, int type, int rid,
300 struct resource *res)
301 {
302 bus_space_handle_t bh;
303 int error;
304
305 switch (type) {
306 case SYS_RES_IRQ:
307 error = bus_generic_activate_resource(bus, child, type, rid,
308 res);
309 if (error != 0)
310 return (error);
311 return (0);
312 case SYS_RES_MEMORY:
313 case SYS_RES_IOPORT:
314 error = bus_space_map(rman_get_bustag(res),
315 rman_get_bushandle(res), rman_get_size(res), 0, &bh);
316 if (error != 0)
317 return (error);
318 rman_set_bushandle(res, bh);
319 break;
320 default:
321 return (ENXIO);
322 }
323
324 error = rman_activate_resource(res);
325 if (error != 0)
326 return (error);
327 return (0);
328 }
329
330 static int
331 octopci_maxslots(device_t dev)
332 {
333 return (PCI_SLOTMAX);
334 }
335
336 static uint32_t
337 octopci_read_config(device_t dev, u_int bus, u_int slot, u_int func, u_int reg,
338 int bytes)
339 {
340 struct octopci_softc *sc;
341 uint64_t addr;
342 uint32_t data;
343
344 sc = device_get_softc(dev);
345
346 if (octeon_has_feature(OCTEON_FEATURE_PCIE)) {
347 if (bus == 0 && slot == 0 && func == 0)
348 return ((uint32_t)-1);
349
350 switch (bytes) {
351 case 4:
352 return (cvmx_pcie_config_read32(sc->sc_domain, bus, slot, func, reg));
353 case 2:
354 return (cvmx_pcie_config_read16(sc->sc_domain, bus, slot, func, reg));
355 case 1:
356 return (cvmx_pcie_config_read8(sc->sc_domain, bus, slot, func, reg));
357 default:
358 return ((uint32_t)-1);
359 }
360 }
361
362 addr = octopci_cs_addr(bus, slot, func, reg);
363
364 switch (bytes) {
365 case 4:
366 data = le32toh(cvmx_read64_uint32(addr));
367 return (data);
368 case 2:
369 data = le16toh(cvmx_read64_uint16(addr));
370 return (data);
371 case 1:
372 data = cvmx_read64_uint8(addr);
373 return (data);
374 default:
375 return ((uint32_t)-1);
376 }
377 }
378
379 static void
380 octopci_write_config(device_t dev, u_int bus, u_int slot, u_int func,
381 u_int reg, uint32_t data, int bytes)
382 {
383 struct octopci_softc *sc;
384 uint64_t addr;
385
386 sc = device_get_softc(dev);
387
388 if (octeon_has_feature(OCTEON_FEATURE_PCIE)) {
389 switch (bytes) {
390 case 4:
391 cvmx_pcie_config_write32(sc->sc_domain, bus, slot, func, reg, data);
392 return;
393 case 2:
394 cvmx_pcie_config_write16(sc->sc_domain, bus, slot, func, reg, data);
395 return;
396 case 1:
397 cvmx_pcie_config_write8(sc->sc_domain, bus, slot, func, reg, data);
398 return;
399 default:
400 return;
401 }
402 }
403
404 addr = octopci_cs_addr(bus, slot, func, reg);
405
406 switch (bytes) {
407 case 4:
408 cvmx_write64_uint32(addr, htole32(data));
409 return;
410 case 2:
411 cvmx_write64_uint16(addr, htole16(data));
412 return;
413 case 1:
414 cvmx_write64_uint8(addr, data);
415 return;
416 default:
417 return;
418 }
419 }
420
421 static int
422 octopci_route_interrupt(device_t dev, device_t child, int pin)
423 {
424 struct octopci_softc *sc;
425 unsigned bus, slot, func;
426 unsigned irq;
427
428 sc = device_get_softc(dev);
429
430 if (octeon_has_feature(OCTEON_FEATURE_PCIE))
431 return (OCTEON_IRQ_PCI_INT0 + pin - 1);
432
433 bus = pci_get_bus(child);
434 slot = pci_get_slot(child);
435 func = pci_get_function(child);
436
437 /*
438 * Board types we have to know at compile-time.
439 */
440 #if defined(OCTEON_BOARD_CAPK_0100ND)
441 if (bus == 0 && slot == 12 && func == 0)
442 return (OCTEON_IRQ_PCI_INT2);
443 #endif
444
445 /*
446 * For board types we can determine at runtime.
447 */
448 switch (cvmx_sysinfo_get()->board_type) {
449 #if defined(OCTEON_VENDOR_LANNER)
450 case CVMX_BOARD_TYPE_CUST_LANNER_MR955:
451 return (OCTEON_IRQ_PCI_INT0 + pin - 1);
452 case CVMX_BOARD_TYPE_CUST_LANNER_MR320:
453 if (slot < 32) {
454 if (slot == 3 || slot == 9)
455 irq = pin;
456 else
457 irq = pin - 1;
458 return (OCTEON_IRQ_PCI_INT0 + (irq & 3));
459 }
460 break;
461 #endif
462 default:
463 break;
464 }
465
466 irq = slot + pin - 3;
467
468 return (OCTEON_IRQ_PCI_INT0 + (irq & 3));
469 }
470
471 static unsigned
472 octopci_init_bar(device_t dev, unsigned b, unsigned s, unsigned f, unsigned barnum, uint8_t *commandp)
473 {
474 struct octopci_softc *sc;
475 uint64_t bar;
476 unsigned size;
477 int barsize;
478
479 sc = device_get_softc(dev);
480
481 octopci_write_config(dev, b, s, f, PCIR_BAR(barnum), 0xffffffff, 4);
482 bar = octopci_read_config(dev, b, s, f, PCIR_BAR(barnum), 4);
483
484 if (bar == 0) {
485 /* Bar not implemented; got to next bar. */
486 return (barnum + 1);
487 }
488
489 if (PCI_BAR_IO(bar)) {
490 size = ~(bar & PCIM_BAR_IO_BASE) + 1;
491
492 sc->sc_io_next = roundup2(sc->sc_io_next, size);
493 if (sc->sc_io_next + size > CVMX_OCT_PCI_IO_SIZE) {
494 device_printf(dev, "%02x.%02x:%02x: no ports for BAR%u.\n",
495 b, s, f, barnum);
496 return (barnum + 1);
497 }
498 octopci_write_config(dev, b, s, f, PCIR_BAR(barnum),
499 CVMX_OCT_PCI_IO_BASE + sc->sc_io_next, 4);
500 sc->sc_io_next += size;
501
502 /*
503 * Enable I/O ports.
504 */
505 *commandp |= PCIM_CMD_PORTEN;
506
507 return (barnum + 1);
508 } else {
509 if (PCIR_BAR(barnum) == PCIR_BIOS) {
510 /*
511 * ROM BAR is always 32-bit.
512 */
513 barsize = 1;
514 } else {
515 switch (bar & PCIM_BAR_MEM_TYPE) {
516 case PCIM_BAR_MEM_64:
517 /*
518 * XXX
519 * High 32 bits are all zeroes for now.
520 */
521 octopci_write_config(dev, b, s, f, PCIR_BAR(barnum + 1), 0, 4);
522 barsize = 2;
523 break;
524 default:
525 barsize = 1;
526 break;
527 }
528 }
529
530 size = ~(bar & (uint32_t)PCIM_BAR_MEM_BASE) + 1;
531
532 sc->sc_mem1_next = roundup2(sc->sc_mem1_next, size);
533 if (sc->sc_mem1_next + size > CVMX_OCT_PCI_MEM1_SIZE) {
534 device_printf(dev, "%02x.%02x:%02x: no memory for BAR%u.\n",
535 b, s, f, barnum);
536 return (barnum + barsize);
537 }
538 octopci_write_config(dev, b, s, f, PCIR_BAR(barnum),
539 CVMX_OCT_PCI_MEM1_BASE + sc->sc_mem1_next, 4);
540 sc->sc_mem1_next += size;
541
542 /*
543 * Enable memory access.
544 */
545 *commandp |= PCIM_CMD_MEMEN;
546
547 return (barnum + barsize);
548 }
549 }
550
551 static unsigned
552 octopci_init_device(device_t dev, unsigned b, unsigned s, unsigned f, unsigned secbus)
553 {
554 unsigned barnum, bars;
555 uint8_t brctl;
556 uint8_t class, subclass;
557 uint8_t command;
558 uint8_t hdrtype;
559
560 /* Read header type (again.) */
561 hdrtype = octopci_read_config(dev, b, s, f, PCIR_HDRTYPE, 1);
562
563 /*
564 * Disable memory and I/O while programming BARs.
565 */
566 command = octopci_read_config(dev, b, s, f, PCIR_COMMAND, 1);
567 command &= ~(PCIM_CMD_MEMEN | PCIM_CMD_PORTEN);
568 octopci_write_config(dev, b, s, f, PCIR_COMMAND, command, 1);
569
570 DELAY(10000);
571
572 /* Program BARs. */
573 switch (hdrtype & PCIM_HDRTYPE) {
574 case PCIM_HDRTYPE_NORMAL:
575 bars = 6;
576 break;
577 case PCIM_HDRTYPE_BRIDGE:
578 bars = 2;
579 break;
580 case PCIM_HDRTYPE_CARDBUS:
581 bars = 0;
582 break;
583 default:
584 device_printf(dev, "%02x.%02x:%02x: invalid header type %#x\n",
585 b, s, f, hdrtype);
586 return (secbus);
587 }
588
589 barnum = 0;
590 while (barnum < bars)
591 barnum = octopci_init_bar(dev, b, s, f, barnum, &command);
592
593 /* Enable bus mastering. */
594 command |= PCIM_CMD_BUSMASTEREN;
595
596 /* Enable whatever facilities the BARs require. */
597 octopci_write_config(dev, b, s, f, PCIR_COMMAND, command, 1);
598
599 DELAY(10000);
600
601 /*
602 * Set cache line size. On Octeon it should be 128 bytes,
603 * but according to Linux some Intel bridges have trouble
604 * with values over 64 bytes, so use 64 bytes.
605 */
606 octopci_write_config(dev, b, s, f, PCIR_CACHELNSZ, 16, 1);
607
608 /* Set latency timer. */
609 octopci_write_config(dev, b, s, f, PCIR_LATTIMER, 48, 1);
610
611 /* Board-specific or device-specific fixups and workarounds. */
612 switch (cvmx_sysinfo_get()->board_type) {
613 #if defined(OCTEON_VENDOR_LANNER)
614 case CVMX_BOARD_TYPE_CUST_LANNER_MR955:
615 if (b == 1 && s == 7 && f == 0) {
616 bus_addr_t busaddr, unitbusaddr;
617 uint32_t bar;
618 uint32_t tmp;
619 unsigned unit;
620
621 /*
622 * Set Tx DMA power.
623 */
624 bar = octopci_read_config(dev, b, s, f,
625 PCIR_BAR(3), 4);
626 busaddr = CVMX_ADDR_DID(CVMX_FULL_DID(CVMX_OCT_DID_PCI,
627 CVMX_OCT_SUBDID_PCI_MEM1));
628 busaddr += (bar & (uint32_t)PCIM_BAR_MEM_BASE);
629 for (unit = 0; unit < 4; unit++) {
630 unitbusaddr = busaddr + 0x430 + (unit << 8);
631 tmp = le32toh(cvmx_read64_uint32(unitbusaddr));
632 tmp &= ~0x700;
633 tmp |= 0x300;
634 cvmx_write64_uint32(unitbusaddr, htole32(tmp));
635 }
636 }
637 break;
638 #endif
639 default:
640 break;
641 }
642
643 /* Configure PCI-PCI bridges. */
644 class = octopci_read_config(dev, b, s, f, PCIR_CLASS, 1);
645 if (class != PCIC_BRIDGE)
646 return (secbus);
647
648 subclass = octopci_read_config(dev, b, s, f, PCIR_SUBCLASS, 1);
649 if (subclass != PCIS_BRIDGE_PCI)
650 return (secbus);
651
652 /* Enable memory and I/O access. */
653 command |= PCIM_CMD_MEMEN | PCIM_CMD_PORTEN;
654 octopci_write_config(dev, b, s, f, PCIR_COMMAND, command, 1);
655
656 /* Enable errors and parity checking. Do a bus reset. */
657 brctl = octopci_read_config(dev, b, s, f, PCIR_BRIDGECTL_1, 1);
658 brctl |= PCIB_BCR_PERR_ENABLE | PCIB_BCR_SERR_ENABLE;
659
660 /* Perform a secondary bus reset. */
661 brctl |= PCIB_BCR_SECBUS_RESET;
662 octopci_write_config(dev, b, s, f, PCIR_BRIDGECTL_1, brctl, 1);
663 DELAY(100000);
664 brctl &= ~PCIB_BCR_SECBUS_RESET;
665 octopci_write_config(dev, b, s, f, PCIR_BRIDGECTL_1, brctl, 1);
666
667 secbus++;
668
669 /* Program memory and I/O ranges. */
670 octopci_write_config(dev, b, s, f, PCIR_MEMBASE_1,
671 CVMX_OCT_PCI_MEM1_BASE >> 16, 2);
672 octopci_write_config(dev, b, s, f, PCIR_MEMLIMIT_1,
673 (CVMX_OCT_PCI_MEM1_BASE + CVMX_OCT_PCI_MEM1_SIZE - 1) >> 16, 2);
674
675 octopci_write_config(dev, b, s, f, PCIR_IOBASEL_1,
676 CVMX_OCT_PCI_IO_BASE >> 8, 1);
677 octopci_write_config(dev, b, s, f, PCIR_IOBASEH_1,
678 CVMX_OCT_PCI_IO_BASE >> 16, 2);
679
680 octopci_write_config(dev, b, s, f, PCIR_IOLIMITL_1,
681 (CVMX_OCT_PCI_IO_BASE + CVMX_OCT_PCI_IO_SIZE - 1) >> 8, 1);
682 octopci_write_config(dev, b, s, f, PCIR_IOLIMITH_1,
683 (CVMX_OCT_PCI_IO_BASE + CVMX_OCT_PCI_IO_SIZE - 1) >> 16, 2);
684
685 /* Program prefetchable memory decoder. */
686 /* XXX */
687
688 /* Probe secondary/subordinate buses. */
689 octopci_write_config(dev, b, s, f, PCIR_PRIBUS_1, b, 1);
690 octopci_write_config(dev, b, s, f, PCIR_SECBUS_1, secbus, 1);
691 octopci_write_config(dev, b, s, f, PCIR_SUBBUS_1, 0xff, 1);
692
693 /* Perform a secondary bus reset. */
694 brctl |= PCIB_BCR_SECBUS_RESET;
695 octopci_write_config(dev, b, s, f, PCIR_BRIDGECTL_1, brctl, 1);
696 DELAY(100000);
697 brctl &= ~PCIB_BCR_SECBUS_RESET;
698 octopci_write_config(dev, b, s, f, PCIR_BRIDGECTL_1, brctl, 1);
699
700 /* Give the bus time to settle now before reading configspace. */
701 DELAY(100000);
702
703 secbus = octopci_init_bus(dev, secbus);
704
705 octopci_write_config(dev, b, s, f, PCIR_SUBBUS_1, secbus, 1);
706
707 return (secbus);
708 }
709
710 static unsigned
711 octopci_init_bus(device_t dev, unsigned b)
712 {
713 unsigned s, f;
714 uint8_t hdrtype;
715 unsigned secbus;
716
717 secbus = b;
718
719 for (s = 0; s <= PCI_SLOTMAX; s++) {
720 for (f = 0; f <= PCI_FUNCMAX; f++) {
721 hdrtype = octopci_read_config(dev, b, s, f, PCIR_HDRTYPE, 1);
722
723 if (hdrtype == 0xff) {
724 if (f == 0)
725 break; /* Next slot. */
726 continue; /* Next function. */
727 }
728
729 secbus = octopci_init_device(dev, b, s, f, secbus);
730
731 if (f == 0 && (hdrtype & PCIM_MFDEV) == 0)
732 break; /* Next slot. */
733 }
734 }
735
736 return (secbus);
737 }
738
739 static uint64_t
740 octopci_cs_addr(unsigned bus, unsigned slot, unsigned func, unsigned reg)
741 {
742 octeon_pci_config_space_address_t pci_addr;
743
744 pci_addr.u64 = 0;
745 pci_addr.s.upper = 2;
746 pci_addr.s.io = 1;
747 pci_addr.s.did = 3;
748 pci_addr.s.subdid = CVMX_OCT_SUBDID_PCI_CFG;
749 pci_addr.s.endian_swap = 1;
750 pci_addr.s.bus = bus;
751 pci_addr.s.dev = slot;
752 pci_addr.s.func = func;
753 pci_addr.s.reg = reg;
754
755 return (pci_addr.u64);
756 }
757
758 static void
759 octopci_init_pci(device_t dev)
760 {
761 cvmx_npi_mem_access_subid_t npi_mem_access_subid;
762 cvmx_npi_pci_int_arb_cfg_t npi_pci_int_arb_cfg;
763 cvmx_npi_ctl_status_t npi_ctl_status;
764 cvmx_pci_ctl_status_2_t pci_ctl_status_2;
765 cvmx_pci_cfg56_t pci_cfg56;
766 cvmx_pci_cfg22_t pci_cfg22;
767 cvmx_pci_cfg16_t pci_cfg16;
768 cvmx_pci_cfg19_t pci_cfg19;
769 cvmx_pci_cfg01_t pci_cfg01;
770 unsigned i;
771
772 /*
773 * Reset the PCI bus.
774 */
775 cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x1);
776 cvmx_read_csr(CVMX_CIU_SOFT_PRST);
777
778 DELAY(2000);
779
780 npi_ctl_status.u64 = 0;
781 npi_ctl_status.s.max_word = 1;
782 npi_ctl_status.s.timer = 1;
783 cvmx_write_csr(CVMX_NPI_CTL_STATUS, npi_ctl_status.u64);
784
785 /*
786 * Set host mode.
787 */
788 switch (cvmx_sysinfo_get()->board_type) {
789 #if defined(OCTEON_VENDOR_LANNER)
790 case CVMX_BOARD_TYPE_CUST_LANNER_MR320:
791 case CVMX_BOARD_TYPE_CUST_LANNER_MR955:
792 /* 32-bit PCI-X */
793 cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x0);
794 break;
795 #endif
796 default:
797 /* 64-bit PCI-X */
798 cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x4);
799 break;
800 }
801 cvmx_read_csr(CVMX_CIU_SOFT_PRST);
802
803 DELAY(2000);
804
805 /*
806 * Enable BARs and configure big BAR mode.
807 */
808 pci_ctl_status_2.u32 = 0;
809 pci_ctl_status_2.s.bb1_hole = 5; /* 256MB hole in BAR1 */
810 pci_ctl_status_2.s.bb1_siz = 1; /* BAR1 is 2GB */
811 pci_ctl_status_2.s.bb_ca = 1; /* Bypass cache for big BAR */
812 pci_ctl_status_2.s.bb_es = 1; /* Do big BAR byte-swapping */
813 pci_ctl_status_2.s.bb1 = 1; /* BAR1 is big */
814 pci_ctl_status_2.s.bb0 = 1; /* BAR0 is big */
815 pci_ctl_status_2.s.bar2pres = 1; /* BAR2 present */
816 pci_ctl_status_2.s.pmo_amod = 1; /* Round-robin priority */
817 pci_ctl_status_2.s.tsr_hwm = 1;
818 pci_ctl_status_2.s.bar2_enb = 1; /* Enable BAR2 */
819 pci_ctl_status_2.s.bar2_esx = 1; /* Do BAR2 byte-swapping */
820 pci_ctl_status_2.s.bar2_cax = 1; /* Bypass cache for BAR2 */
821
822 NPI_WRITE(CVMX_NPI_PCI_CTL_STATUS_2, pci_ctl_status_2.u32);
823
824 DELAY(2000);
825
826 pci_ctl_status_2.u32 = NPI_READ(CVMX_NPI_PCI_CTL_STATUS_2);
827
828 device_printf(dev, "%u-bit PCI%s bus.\n",
829 pci_ctl_status_2.s.ap_64ad ? 64 : 32,
830 pci_ctl_status_2.s.ap_pcix ? "-X" : "");
831
832 /*
833 * Set up transaction splitting, etc., parameters.
834 */
835 pci_cfg19.u32 = 0;
836 pci_cfg19.s.mrbcm = 1;
837 if (pci_ctl_status_2.s.ap_pcix) {
838 pci_cfg19.s.mdrrmc = 0;
839 pci_cfg19.s.tdomc = 4;
840 } else {
841 pci_cfg19.s.mdrrmc = 2;
842 pci_cfg19.s.tdomc = 1;
843 }
844 NPI_WRITE(CVMX_NPI_PCI_CFG19, pci_cfg19.u32);
845 NPI_READ(CVMX_NPI_PCI_CFG19);
846
847 /*
848 * Set up PCI error handling and memory access.
849 */
850 pci_cfg01.u32 = 0;
851 pci_cfg01.s.fbbe = 1;
852 pci_cfg01.s.see = 1;
853 pci_cfg01.s.pee = 1;
854 pci_cfg01.s.me = 1;
855 pci_cfg01.s.msae = 1;
856 if (pci_ctl_status_2.s.ap_pcix) {
857 pci_cfg01.s.fbb = 0;
858 } else {
859 pci_cfg01.s.fbb = 1;
860 }
861 NPI_WRITE(CVMX_NPI_PCI_CFG01, pci_cfg01.u32);
862 NPI_READ(CVMX_NPI_PCI_CFG01);
863
864 /*
865 * Enable the Octeon bus arbiter.
866 */
867 npi_pci_int_arb_cfg.u64 = 0;
868 npi_pci_int_arb_cfg.s.en = 1;
869 cvmx_write_csr(CVMX_NPI_PCI_INT_ARB_CFG, npi_pci_int_arb_cfg.u64);
870
871 /*
872 * Disable master latency timer.
873 */
874 pci_cfg16.u32 = 0;
875 pci_cfg16.s.mltd = 1;
876 NPI_WRITE(CVMX_NPI_PCI_CFG16, pci_cfg16.u32);
877 NPI_READ(CVMX_NPI_PCI_CFG16);
878
879 /*
880 * Configure master arbiter.
881 */
882 pci_cfg22.u32 = 0;
883 pci_cfg22.s.flush = 1;
884 pci_cfg22.s.mrv = 255;
885 NPI_WRITE(CVMX_NPI_PCI_CFG22, pci_cfg22.u32);
886 NPI_READ(CVMX_NPI_PCI_CFG22);
887
888 /*
889 * Set up PCI-X capabilities.
890 */
891 if (pci_ctl_status_2.s.ap_pcix) {
892 pci_cfg56.u32 = 0;
893 pci_cfg56.s.most = 3;
894 pci_cfg56.s.roe = 1; /* Enable relaxed ordering */
895 pci_cfg56.s.dpere = 1;
896 pci_cfg56.s.ncp = 0xe8;
897 pci_cfg56.s.pxcid = 7;
898 NPI_WRITE(CVMX_NPI_PCI_CFG56, pci_cfg56.u32);
899 NPI_READ(CVMX_NPI_PCI_CFG56);
900 }
901
902 NPI_WRITE(CVMX_NPI_PCI_READ_CMD_6, 0x22);
903 NPI_READ(CVMX_NPI_PCI_READ_CMD_6);
904 NPI_WRITE(CVMX_NPI_PCI_READ_CMD_C, 0x33);
905 NPI_READ(CVMX_NPI_PCI_READ_CMD_C);
906 NPI_WRITE(CVMX_NPI_PCI_READ_CMD_E, 0x33);
907 NPI_READ(CVMX_NPI_PCI_READ_CMD_E);
908
909 /*
910 * Configure MEM1 sub-DID access.
911 */
912 npi_mem_access_subid.u64 = 0;
913 npi_mem_access_subid.s.esr = 1; /* Byte-swap on read */
914 npi_mem_access_subid.s.esw = 1; /* Byte-swap on write */
915 switch (cvmx_sysinfo_get()->board_type) {
916 #if defined(OCTEON_VENDOR_LANNER)
917 case CVMX_BOARD_TYPE_CUST_LANNER_MR955:
918 npi_mem_access_subid.s.shortl = 1;
919 break;
920 #endif
921 default:
922 break;
923 }
924 cvmx_write_csr(CVMX_NPI_MEM_ACCESS_SUBID3, npi_mem_access_subid.u64);
925
926 /*
927 * Configure BAR2. Linux says this has to come first.
928 */
929 NPI_WRITE(CVMX_NPI_PCI_CFG08, 0x00000000);
930 NPI_READ(CVMX_NPI_PCI_CFG08);
931 NPI_WRITE(CVMX_NPI_PCI_CFG09, 0x00000080);
932 NPI_READ(CVMX_NPI_PCI_CFG09);
933
934 /*
935 * Disable BAR1 IndexX.
936 */
937 for (i = 0; i < 32; i++) {
938 NPI_WRITE(CVMX_NPI_PCI_BAR1_INDEXX(i), 0);
939 NPI_READ(CVMX_NPI_PCI_BAR1_INDEXX(i));
940 }
941
942 /*
943 * Configure BAR0 and BAR1.
944 */
945 NPI_WRITE(CVMX_NPI_PCI_CFG04, 0x00000000);
946 NPI_READ(CVMX_NPI_PCI_CFG04);
947 NPI_WRITE(CVMX_NPI_PCI_CFG05, 0x00000000);
948 NPI_READ(CVMX_NPI_PCI_CFG05);
949
950 NPI_WRITE(CVMX_NPI_PCI_CFG06, 0x80000000);
951 NPI_READ(CVMX_NPI_PCI_CFG06);
952 NPI_WRITE(CVMX_NPI_PCI_CFG07, 0x00000000);
953 NPI_READ(CVMX_NPI_PCI_CFG07);
954
955 /*
956 * Clear PCI interrupts.
957 */
958 cvmx_write_csr(CVMX_NPI_PCI_INT_SUM2, 0xffffffffffffffffull);
959 }
960
961 static device_method_t octopci_methods[] = {
962 /* Device interface */
963 DEVMETHOD(device_identify, octopci_identify),
964 DEVMETHOD(device_probe, octopci_probe),
965 DEVMETHOD(device_attach, octopci_attach),
966
967 /* Bus interface */
968 DEVMETHOD(bus_read_ivar, octopci_read_ivar),
969 DEVMETHOD(bus_alloc_resource, octopci_alloc_resource),
970 DEVMETHOD(bus_release_resource, bus_generic_release_resource),
971 DEVMETHOD(bus_activate_resource,octopci_activate_resource),
972 DEVMETHOD(bus_deactivate_resource,bus_generic_deactivate_resource),
973 DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
974 DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
975
976 DEVMETHOD(bus_add_child, bus_generic_add_child),
977
978 /* pcib interface */
979 DEVMETHOD(pcib_maxslots, octopci_maxslots),
980 DEVMETHOD(pcib_read_config, octopci_read_config),
981 DEVMETHOD(pcib_write_config, octopci_write_config),
982 DEVMETHOD(pcib_route_interrupt, octopci_route_interrupt),
983 DEVMETHOD(pcib_request_feature, pcib_request_feature_allow),
984
985 DEVMETHOD_END
986 };
987
988 static driver_t octopci_driver = {
989 "pcib",
990 octopci_methods,
991 sizeof(struct octopci_softc),
992 };
993 static devclass_t octopci_devclass;
994 DRIVER_MODULE(octopci, ciu, octopci_driver, octopci_devclass, 0, 0);
Cache object: 262e77f7a0fd52098540061cbc9fef2f
|