1 /*-
2 * Copyright (c) 2003 Marcel Moolenaar
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25 */
26
27 /*
28 * uart_dev_oct16550.c
29 *
30 * Derived from uart_dev_ns8250.c
31 *
32 * Redistribution and use in source and binary forms, with or without
33 * modification, are permitted provided that the following conditions
34 * are met:
35 *
36 * 1. Redistributions of source code must retain the above copyright
37 * notice, this list of conditions and the following disclaimer.
38 * 2. Redistributions in binary form must reproduce the above copyright
39 * notice, this list of conditions and the following disclaimer in the
40 * documentation and/or other materials provided with the distribution.
41 *
42 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
43 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
44 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
45 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
46 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
47 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
48 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
49 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
50 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
51 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
52 *
53 *
54 */
55
56
57 #include <sys/cdefs.h>
58 __FBSDID("$FreeBSD: releng/9.0/sys/mips/cavium/uart_dev_oct16550.c 213345 2010-10-02 05:38:45Z jmallett $");
59
60 #include <sys/param.h>
61 #include <sys/systm.h>
62 #include <sys/bus.h>
63 #include <sys/conf.h>
64 #include <machine/bus.h>
65 #include <machine/pcpu.h>
66
67 #include <dev/uart/uart.h>
68 #include <dev/uart/uart_cpu.h>
69 #include <dev/uart/uart_bus.h>
70
71 #include <dev/ic/ns16550.h>
72
73 #include <mips/cavium/octeon_pcmap_regs.h>
74
75 #include <contrib/octeon-sdk/cvmx.h>
76 #include <contrib/octeon-sdk/cvmx-interrupt.h>
77
78 #include "uart_if.h"
79
80 /*
81 * Clear pending interrupts. THRE is cleared by reading IIR. Data
82 * that may have been received gets lost here.
83 */
84 static void
85 oct16550_clrint (struct uart_bas *bas)
86 {
87 uint8_t iir;
88
89 iir = uart_getreg(bas, REG_IIR);
90 while ((iir & IIR_NOPEND) == 0) {
91 iir &= IIR_IMASK;
92 if (iir == IIR_RLS)
93 (void)uart_getreg(bas, REG_LSR);
94 else if (iir == IIR_RXRDY || iir == IIR_RXTOUT)
95 (void)uart_getreg(bas, REG_DATA);
96 else if (iir == IIR_MLSC)
97 (void)uart_getreg(bas, REG_MSR);
98 else if (iir == IIR_BUSY)
99 (void) uart_getreg(bas, REG_USR);
100 uart_barrier(bas);
101 iir = uart_getreg(bas, REG_IIR);
102 }
103 }
104
105 static int delay_changed = 1;
106
107 static int
108 oct16550_delay (struct uart_bas *bas)
109 {
110 int divisor;
111 u_char lcr;
112 static int delay = 0;
113
114 if (!delay_changed) return delay;
115 delay_changed = 0;
116 lcr = uart_getreg(bas, REG_LCR);
117 uart_setreg(bas, REG_LCR, lcr | LCR_DLAB);
118 uart_barrier(bas);
119 divisor = uart_getreg(bas, REG_DLL) | (uart_getreg(bas, REG_DLH) << 8);
120 uart_barrier(bas);
121 uart_setreg(bas, REG_LCR, lcr);
122 uart_barrier(bas);
123
124 if(!bas->rclk)
125 return 10; /* return an approx delay value */
126
127 /* 1/10th the time to transmit 1 character (estimate). */
128 if (divisor <= 134)
129 return (16000000 * divisor / bas->rclk);
130 return (16000 * divisor / (bas->rclk / 1000));
131
132 }
133
134 static int
135 oct16550_divisor (int rclk, int baudrate)
136 {
137 int actual_baud, divisor;
138 int error;
139
140 if (baudrate == 0)
141 return (0);
142
143 divisor = (rclk / (baudrate << 3) + 1) >> 1;
144 if (divisor == 0 || divisor >= 65536)
145 return (0);
146 actual_baud = rclk / (divisor << 4);
147
148 /* 10 times error in percent: */
149 error = ((actual_baud - baudrate) * 2000 / baudrate + 1) >> 1;
150
151 /* 3.0% maximum error tolerance: */
152 if (error < -30 || error > 30)
153 return (0);
154
155 return (divisor);
156 }
157
158 static int
159 oct16550_drain (struct uart_bas *bas, int what)
160 {
161 int delay, limit;
162
163 delay = oct16550_delay(bas);
164
165 if (what & UART_DRAIN_TRANSMITTER) {
166 /*
167 * Pick an arbitrary high limit to avoid getting stuck in
168 * an infinite loop when the hardware is broken. Make the
169 * limit high enough to handle large FIFOs.
170 */
171 limit = 10*10*10*1024;
172 while ((uart_getreg(bas, REG_LSR) & LSR_TEMT) == 0 && --limit)
173 DELAY(delay);
174 if (limit == 0) {
175 /* printf("oct16550: transmitter appears stuck... "); */
176 return (0);
177 }
178 }
179
180 if (what & UART_DRAIN_RECEIVER) {
181 /*
182 * Pick an arbitrary high limit to avoid getting stuck in
183 * an infinite loop when the hardware is broken. Make the
184 * limit high enough to handle large FIFOs and integrated
185 * UARTs. The HP rx2600 for example has 3 UARTs on the
186 * management board that tend to get a lot of data send
187 * to it when the UART is first activated.
188 */
189 limit=10*4096;
190 while ((uart_getreg(bas, REG_LSR) & LSR_RXRDY) && --limit) {
191 (void)uart_getreg(bas, REG_DATA);
192 uart_barrier(bas);
193 DELAY(delay << 2);
194 }
195 if (limit == 0) {
196 /* printf("oct16550: receiver appears broken... "); */
197 return (EIO);
198 }
199 }
200
201 return (0);
202 }
203
204 /*
205 * We can only flush UARTs with FIFOs. UARTs without FIFOs should be
206 * drained. WARNING: this function clobbers the FIFO setting!
207 */
208 static void
209 oct16550_flush (struct uart_bas *bas, int what)
210 {
211 uint8_t fcr;
212
213 fcr = FCR_ENABLE;
214 if (what & UART_FLUSH_TRANSMITTER)
215 fcr |= FCR_XMT_RST;
216 if (what & UART_FLUSH_RECEIVER)
217 fcr |= FCR_RCV_RST;
218 uart_setreg(bas, REG_FCR, fcr);
219 uart_barrier(bas);
220 }
221
222 static int
223 oct16550_param (struct uart_bas *bas, int baudrate, int databits, int stopbits,
224 int parity)
225 {
226 int divisor;
227 uint8_t lcr;
228
229 lcr = 0;
230 if (databits >= 8)
231 lcr |= LCR_8BITS;
232 else if (databits == 7)
233 lcr |= LCR_7BITS;
234 else if (databits == 6)
235 lcr |= LCR_6BITS;
236 else
237 lcr |= LCR_5BITS;
238 if (stopbits > 1)
239 lcr |= LCR_STOPB;
240 lcr |= parity << 3;
241
242 /* Set baudrate. */
243 if (baudrate > 0) {
244 divisor = oct16550_divisor(bas->rclk, baudrate);
245 if (divisor == 0)
246 return (EINVAL);
247 uart_setreg(bas, REG_LCR, lcr | LCR_DLAB);
248 uart_barrier(bas);
249 uart_setreg(bas, REG_DLL, divisor & 0xff);
250 uart_setreg(bas, REG_DLH, (divisor >> 8) & 0xff);
251 uart_barrier(bas);
252 delay_changed = 1;
253 }
254
255 /* Set LCR and clear DLAB. */
256 uart_setreg(bas, REG_LCR, lcr);
257 uart_barrier(bas);
258 return (0);
259 }
260
261 /*
262 * Low-level UART interface.
263 */
264 static int oct16550_probe(struct uart_bas *bas);
265 static void oct16550_init(struct uart_bas *bas, int, int, int, int);
266 static void oct16550_term(struct uart_bas *bas);
267 static void oct16550_putc(struct uart_bas *bas, int);
268 static int oct16550_rxready(struct uart_bas *bas);
269 static int oct16550_getc(struct uart_bas *bas, struct mtx *);
270
271 struct uart_ops uart_oct16550_ops = {
272 .probe = oct16550_probe,
273 .init = oct16550_init,
274 .term = oct16550_term,
275 .putc = oct16550_putc,
276 .rxready = oct16550_rxready,
277 .getc = oct16550_getc,
278 };
279
280 static int
281 oct16550_probe (struct uart_bas *bas)
282 {
283 u_char val;
284
285 /* Check known 0 bits that don't depend on DLAB. */
286 val = uart_getreg(bas, REG_IIR);
287 if (val & 0x30)
288 return (ENXIO);
289 val = uart_getreg(bas, REG_MCR);
290 if (val & 0xc0)
291 return (ENXIO);
292 val = uart_getreg(bas, REG_USR);
293 if (val & 0xe0)
294 return (ENXIO);
295 return (0);
296 }
297
298 static void
299 oct16550_init (struct uart_bas *bas, int baudrate, int databits, int stopbits,
300 int parity)
301 {
302 u_char ier;
303
304 oct16550_param(bas, baudrate, databits, stopbits, parity);
305
306 /* Disable all interrupt sources. */
307 ier = uart_getreg(bas, REG_IER) & 0x0;
308 uart_setreg(bas, REG_IER, ier);
309 uart_barrier(bas);
310
311 /* Disable the FIFO (if present). */
312 // uart_setreg(bas, REG_FCR, 0);
313 uart_barrier(bas);
314
315 /* Set RTS & DTR. */
316 uart_setreg(bas, REG_MCR, MCR_RTS | MCR_DTR);
317 uart_barrier(bas);
318
319 oct16550_clrint(bas);
320 }
321
322 static void
323 oct16550_term (struct uart_bas *bas)
324 {
325
326 /* Clear RTS & DTR. */
327 uart_setreg(bas, REG_MCR, 0);
328 uart_barrier(bas);
329 }
330
331 static inline void oct16550_wait_txhr_empty (struct uart_bas *bas, int limit, int delay)
332 {
333 while (((uart_getreg(bas, REG_LSR) & LSR_THRE) == 0) &&
334 ((uart_getreg(bas, REG_USR) & USR_TXFIFO_NOTFULL) == 0))
335 DELAY(delay);
336 }
337
338 static void
339 oct16550_putc (struct uart_bas *bas, int c)
340 {
341 int delay;
342
343 /* 1/10th the time to transmit 1 character (estimate). */
344 delay = oct16550_delay(bas);
345 oct16550_wait_txhr_empty(bas, 100, delay);
346 uart_setreg(bas, REG_DATA, c);
347 uart_barrier(bas);
348 oct16550_wait_txhr_empty(bas, 100, delay);
349 }
350
351 static int
352 oct16550_rxready (struct uart_bas *bas)
353 {
354
355 return ((uart_getreg(bas, REG_LSR) & LSR_RXRDY) != 0 ? 1 : 0);
356 }
357
358 static int
359 oct16550_getc (struct uart_bas *bas, struct mtx *hwmtx)
360 {
361 int c, delay;
362
363 uart_lock(hwmtx);
364
365 /* 1/10th the time to transmit 1 character (estimate). */
366 delay = oct16550_delay(bas);
367
368 while ((uart_getreg(bas, REG_LSR) & LSR_RXRDY) == 0) {
369 uart_unlock(hwmtx);
370 DELAY(delay);
371 uart_lock(hwmtx);
372 }
373
374 c = uart_getreg(bas, REG_DATA);
375
376 uart_unlock(hwmtx);
377
378 return (c);
379 }
380
381 /*
382 * High-level UART interface.
383 */
384 struct oct16550_softc {
385 struct uart_softc base;
386 uint8_t fcr;
387 uint8_t ier;
388 uint8_t mcr;
389 };
390
391 static int oct16550_bus_attach(struct uart_softc *);
392 static int oct16550_bus_detach(struct uart_softc *);
393 static int oct16550_bus_flush(struct uart_softc *, int);
394 static int oct16550_bus_getsig(struct uart_softc *);
395 static int oct16550_bus_ioctl(struct uart_softc *, int, intptr_t);
396 static int oct16550_bus_ipend(struct uart_softc *);
397 static int oct16550_bus_param(struct uart_softc *, int, int, int, int);
398 static int oct16550_bus_probe(struct uart_softc *);
399 static int oct16550_bus_receive(struct uart_softc *);
400 static int oct16550_bus_setsig(struct uart_softc *, int);
401 static int oct16550_bus_transmit(struct uart_softc *);
402
403 static kobj_method_t oct16550_methods[] = {
404 KOBJMETHOD(uart_attach, oct16550_bus_attach),
405 KOBJMETHOD(uart_detach, oct16550_bus_detach),
406 KOBJMETHOD(uart_flush, oct16550_bus_flush),
407 KOBJMETHOD(uart_getsig, oct16550_bus_getsig),
408 KOBJMETHOD(uart_ioctl, oct16550_bus_ioctl),
409 KOBJMETHOD(uart_ipend, oct16550_bus_ipend),
410 KOBJMETHOD(uart_param, oct16550_bus_param),
411 KOBJMETHOD(uart_probe, oct16550_bus_probe),
412 KOBJMETHOD(uart_receive, oct16550_bus_receive),
413 KOBJMETHOD(uart_setsig, oct16550_bus_setsig),
414 KOBJMETHOD(uart_transmit, oct16550_bus_transmit),
415 { 0, 0 }
416 };
417
418 struct uart_class uart_oct16550_class = {
419 "oct16550 class",
420 oct16550_methods,
421 sizeof(struct oct16550_softc),
422 .uc_ops = &uart_oct16550_ops,
423 .uc_range = 8 << 3,
424 .uc_rclk = 0
425 };
426
427 #define SIGCHG(c, i, s, d) \
428 if (c) { \
429 i |= (i & s) ? s : s | d; \
430 } else { \
431 i = (i & s) ? (i & ~s) | d : i; \
432 }
433
434 static int
435 oct16550_bus_attach (struct uart_softc *sc)
436 {
437 struct oct16550_softc *oct16550 = (struct oct16550_softc*)sc;
438 struct uart_bas *bas;
439 int unit;
440
441 unit = device_get_unit(sc->sc_dev);
442 bas = &sc->sc_bas;
443
444 oct16550_drain(bas, UART_DRAIN_TRANSMITTER);
445 oct16550->mcr = uart_getreg(bas, REG_MCR);
446 oct16550->fcr = FCR_ENABLE | FCR_RX_HIGH;
447 uart_setreg(bas, REG_FCR, oct16550->fcr);
448 uart_barrier(bas);
449 oct16550_bus_flush(sc, UART_FLUSH_RECEIVER|UART_FLUSH_TRANSMITTER);
450
451 if (oct16550->mcr & MCR_DTR)
452 sc->sc_hwsig |= SER_DTR;
453 if (oct16550->mcr & MCR_RTS)
454 sc->sc_hwsig |= SER_RTS;
455 oct16550_bus_getsig(sc);
456
457 oct16550_clrint(bas);
458 oct16550->ier = uart_getreg(bas, REG_IER) & 0xf0;
459 oct16550->ier |= IER_EMSC | IER_ERLS | IER_ERXRDY;
460 uart_setreg(bas, REG_IER, oct16550->ier);
461 uart_barrier(bas);
462
463 /*
464 * Enable the interrupt in CIU. // UART-x2 @ IP2
465 */
466 switch (unit) {
467 case 0:
468 cvmx_interrupt_unmask_irq(CVMX_IRQ_UART0);
469 break;
470 case 1:
471 cvmx_interrupt_unmask_irq(CVMX_IRQ_UART1);
472 break;
473 default:
474 panic("%s: invalid UART %d", __func__, unit);
475 }
476 return (0);
477 }
478
479 static int
480 oct16550_bus_detach (struct uart_softc *sc)
481 {
482 struct uart_bas *bas;
483 u_char ier;
484
485 bas = &sc->sc_bas;
486 ier = uart_getreg(bas, REG_IER) & 0xf0;
487 uart_setreg(bas, REG_IER, ier);
488 uart_barrier(bas);
489 oct16550_clrint(bas);
490 return (0);
491 }
492
493 static int
494 oct16550_bus_flush (struct uart_softc *sc, int what)
495 {
496 struct oct16550_softc *oct16550 = (struct oct16550_softc*)sc;
497 struct uart_bas *bas;
498 int error;
499
500 bas = &sc->sc_bas;
501 uart_lock(sc->sc_hwmtx);
502 if (sc->sc_rxfifosz > 1) {
503 oct16550_flush(bas, what);
504 uart_setreg(bas, REG_FCR, oct16550->fcr);
505 uart_barrier(bas);
506 error = 0;
507 } else
508 error = oct16550_drain(bas, what);
509 uart_unlock(sc->sc_hwmtx);
510 return (error);
511 }
512
513 static int
514 oct16550_bus_getsig (struct uart_softc *sc)
515 {
516 uint32_t new, old, sig;
517 uint8_t msr;
518
519 do {
520 old = sc->sc_hwsig;
521 sig = old;
522 uart_lock(sc->sc_hwmtx);
523 msr = uart_getreg(&sc->sc_bas, REG_MSR);
524 uart_unlock(sc->sc_hwmtx);
525 SIGCHG(msr & MSR_DSR, sig, SER_DSR, SER_DDSR);
526 SIGCHG(msr & MSR_CTS, sig, SER_CTS, SER_DCTS);
527 SIGCHG(msr & MSR_DCD, sig, SER_DCD, SER_DDCD);
528 SIGCHG(msr & MSR_RI, sig, SER_RI, SER_DRI);
529 new = sig & ~SER_MASK_DELTA;
530 } while (!atomic_cmpset_32(&sc->sc_hwsig, old, new));
531 return (sig);
532 }
533
534 static int
535 oct16550_bus_ioctl (struct uart_softc *sc, int request, intptr_t data)
536 {
537 struct uart_bas *bas;
538 int baudrate, divisor, error;
539 uint8_t efr, lcr;
540
541 bas = &sc->sc_bas;
542 error = 0;
543 uart_lock(sc->sc_hwmtx);
544 switch (request) {
545 case UART_IOCTL_BREAK:
546 lcr = uart_getreg(bas, REG_LCR);
547 if (data)
548 lcr |= LCR_SBREAK;
549 else
550 lcr &= ~LCR_SBREAK;
551 uart_setreg(bas, REG_LCR, lcr);
552 uart_barrier(bas);
553 break;
554 case UART_IOCTL_IFLOW:
555 lcr = uart_getreg(bas, REG_LCR);
556 uart_barrier(bas);
557 uart_setreg(bas, REG_LCR, 0xbf);
558 uart_barrier(bas);
559 efr = uart_getreg(bas, REG_EFR);
560 if (data)
561 efr |= EFR_RTS;
562 else
563 efr &= ~EFR_RTS;
564 uart_setreg(bas, REG_EFR, efr);
565 uart_barrier(bas);
566 uart_setreg(bas, REG_LCR, lcr);
567 uart_barrier(bas);
568 break;
569 case UART_IOCTL_OFLOW:
570 lcr = uart_getreg(bas, REG_LCR);
571 uart_barrier(bas);
572 uart_setreg(bas, REG_LCR, 0xbf);
573 uart_barrier(bas);
574 efr = uart_getreg(bas, REG_EFR);
575 if (data)
576 efr |= EFR_CTS;
577 else
578 efr &= ~EFR_CTS;
579 uart_setreg(bas, REG_EFR, efr);
580 uart_barrier(bas);
581 uart_setreg(bas, REG_LCR, lcr);
582 uart_barrier(bas);
583 break;
584 case UART_IOCTL_BAUD:
585 lcr = uart_getreg(bas, REG_LCR);
586 uart_setreg(bas, REG_LCR, lcr | LCR_DLAB);
587 uart_barrier(bas);
588 divisor = uart_getreg(bas, REG_DLL) |
589 (uart_getreg(bas, REG_DLH) << 8);
590 uart_barrier(bas);
591 uart_setreg(bas, REG_LCR, lcr);
592 uart_barrier(bas);
593 baudrate = (divisor > 0) ? bas->rclk / divisor / 16 : 0;
594 delay_changed = 1;
595 if (baudrate > 0)
596 *(int*)data = baudrate;
597 else
598 error = ENXIO;
599 break;
600 default:
601 error = EINVAL;
602 break;
603 }
604 uart_unlock(sc->sc_hwmtx);
605 return (error);
606 }
607
608
609 static int
610 oct16550_bus_ipend(struct uart_softc *sc)
611 {
612 struct uart_bas *bas;
613 int ipend = 0;
614 uint8_t iir, lsr;
615
616 bas = &sc->sc_bas;
617 uart_lock(sc->sc_hwmtx);
618
619 iir = uart_getreg(bas, REG_IIR) & IIR_IMASK;
620 if (iir != IIR_NOPEND) {
621
622 if (iir == IIR_RLS) {
623 lsr = uart_getreg(bas, REG_LSR);
624 if (lsr & LSR_OE)
625 ipend |= SER_INT_OVERRUN;
626 if (lsr & LSR_BI)
627 ipend |= SER_INT_BREAK;
628 if (lsr & LSR_RXRDY)
629 ipend |= SER_INT_RXREADY;
630
631 } else if (iir == IIR_RXRDY) {
632 ipend |= SER_INT_RXREADY;
633
634 } else if (iir == IIR_RXTOUT) {
635 ipend |= SER_INT_RXREADY;
636
637 } else if (iir == IIR_TXRDY) {
638 ipend |= SER_INT_TXIDLE;
639
640 } else if (iir == IIR_MLSC) {
641 ipend |= SER_INT_SIGCHG;
642
643 } else if (iir == IIR_BUSY) {
644 (void) uart_getreg(bas, REG_USR);
645 }
646 }
647 uart_unlock(sc->sc_hwmtx);
648
649 //#define OCTEON_VISUAL_UART 1
650 #ifdef OCTEON_VISUAL_UART
651 static int where1 = 0;
652
653 if (ipend) octeon_led_run_wheel(&where1, 6 + device_get_unit(sc->sc_dev));
654 #endif
655
656 return (ipend);
657 }
658
659 static int
660 oct16550_bus_param (struct uart_softc *sc, int baudrate, int databits,
661 int stopbits, int parity)
662 {
663 struct uart_bas *bas;
664 int error;
665
666 bas = &sc->sc_bas;
667 uart_lock(sc->sc_hwmtx);
668 error = oct16550_param(bas, baudrate, databits, stopbits, parity);
669 uart_unlock(sc->sc_hwmtx);
670 return (error);
671 }
672
673 static int
674 oct16550_bus_probe (struct uart_softc *sc)
675 {
676 struct uart_bas *bas;
677 int error;
678
679 bas = &sc->sc_bas;
680 bas->rclk = uart_oct16550_class.uc_rclk = cvmx_sysinfo_get()->cpu_clock_hz;
681
682 error = oct16550_probe(bas);
683 if (error) {
684 return (error);
685 }
686
687 uart_setreg(bas, REG_MCR, (MCR_DTR | MCR_RTS));
688
689 /*
690 * Enable FIFOs. And check that the UART has them. If not, we're
691 * done. Since this is the first time we enable the FIFOs, we reset
692 * them.
693 */
694 oct16550_drain(bas, UART_DRAIN_TRANSMITTER);
695 #define ENABLE_OCTEON_FIFO 1
696 #ifdef ENABLE_OCTEON_FIFO
697 uart_setreg(bas, REG_FCR, FCR_ENABLE | FCR_XMT_RST | FCR_RCV_RST);
698 #endif
699 uart_barrier(bas);
700
701 oct16550_flush(bas, UART_FLUSH_RECEIVER|UART_FLUSH_TRANSMITTER);
702
703 if (device_get_unit(sc->sc_dev)) {
704 device_set_desc(sc->sc_dev, "Octeon-16550 channel 1");
705 } else {
706 device_set_desc(sc->sc_dev, "Octeon-16550 channel 0");
707 }
708 #ifdef ENABLE_OCTEON_FIFO
709 sc->sc_rxfifosz = 64;
710 sc->sc_txfifosz = 64;
711 #else
712 sc->sc_rxfifosz = 1;
713 sc->sc_txfifosz = 1;
714 #endif
715
716
717 #if 0
718 /*
719 * XXX there are some issues related to hardware flow control and
720 * it's likely that uart(4) is the cause. This basicly needs more
721 * investigation, but we avoid using for hardware flow control
722 * until then.
723 */
724 /* 16650s or higher have automatic flow control. */
725 if (sc->sc_rxfifosz > 16) {
726 sc->sc_hwiflow = 1;
727 sc->sc_hwoflow = 1;
728 }
729 #endif
730
731 return (0);
732 }
733
734 static int
735 oct16550_bus_receive (struct uart_softc *sc)
736 {
737 struct uart_bas *bas;
738 int xc;
739 uint8_t lsr;
740
741 bas = &sc->sc_bas;
742 uart_lock(sc->sc_hwmtx);
743 lsr = uart_getreg(bas, REG_LSR);
744
745 while (lsr & LSR_RXRDY) {
746 if (uart_rx_full(sc)) {
747 sc->sc_rxbuf[sc->sc_rxput] = UART_STAT_OVERRUN;
748 break;
749 }
750 xc = uart_getreg(bas, REG_DATA);
751 if (lsr & LSR_FE)
752 xc |= UART_STAT_FRAMERR;
753 if (lsr & LSR_PE)
754 xc |= UART_STAT_PARERR;
755 uart_rx_put(sc, xc);
756 lsr = uart_getreg(bas, REG_LSR);
757 }
758 /* Discard everything left in the Rx FIFO. */
759 /*
760 * First do a dummy read/discard anyway, in case the UART was lying to us.
761 * This problem was seen on board, when IIR said RBR, but LSR said no RXRDY
762 * Results in a stuck ipend loop.
763 */
764 (void)uart_getreg(bas, REG_DATA);
765 while (lsr & LSR_RXRDY) {
766 (void)uart_getreg(bas, REG_DATA);
767 uart_barrier(bas);
768 lsr = uart_getreg(bas, REG_LSR);
769 }
770 uart_unlock(sc->sc_hwmtx);
771 return (0);
772 }
773
774 static int
775 oct16550_bus_setsig (struct uart_softc *sc, int sig)
776 {
777 struct oct16550_softc *oct16550 = (struct oct16550_softc*)sc;
778 struct uart_bas *bas;
779 uint32_t new, old;
780
781 bas = &sc->sc_bas;
782 do {
783 old = sc->sc_hwsig;
784 new = old;
785 if (sig & SER_DDTR) {
786 SIGCHG(sig & SER_DTR, new, SER_DTR,
787 SER_DDTR);
788 }
789 if (sig & SER_DRTS) {
790 SIGCHG(sig & SER_RTS, new, SER_RTS,
791 SER_DRTS);
792 }
793 } while (!atomic_cmpset_32(&sc->sc_hwsig, old, new));
794 uart_lock(sc->sc_hwmtx);
795 oct16550->mcr &= ~(MCR_DTR|MCR_RTS);
796 if (new & SER_DTR)
797 oct16550->mcr |= MCR_DTR;
798 if (new & SER_RTS)
799 oct16550->mcr |= MCR_RTS;
800 uart_setreg(bas, REG_MCR, oct16550->mcr);
801 uart_barrier(bas);
802 uart_unlock(sc->sc_hwmtx);
803 return (0);
804 }
805
806 static int
807 oct16550_bus_transmit (struct uart_softc *sc)
808 {
809 struct oct16550_softc *oct16550 = (struct oct16550_softc*)sc;
810 struct uart_bas *bas;
811 int i;
812
813 bas = &sc->sc_bas;
814 uart_lock(sc->sc_hwmtx);
815 #ifdef NO_UART_INTERRUPTS
816 for (i = 0; i < sc->sc_txdatasz; i++) {
817 oct16550_putc(bas, sc->sc_txbuf[i]);
818 }
819 #else
820
821 oct16550_wait_txhr_empty(bas, 100, oct16550_delay(bas));
822 uart_setreg(bas, REG_IER, oct16550->ier | IER_ETXRDY);
823 uart_barrier(bas);
824
825 for (i = 0; i < sc->sc_txdatasz; i++) {
826 uart_setreg(bas, REG_DATA, sc->sc_txbuf[i]);
827 uart_barrier(bas);
828 }
829 sc->sc_txbusy = 1;
830 #endif
831 uart_unlock(sc->sc_hwmtx);
832 return (0);
833 }
Cache object: 1ac372722c4025849f5e8ecab82623c4
|