FreeBSD/Linux Kernel Cross Reference
sys/mips/conf/AP96
1 #
2 # Specific board setup for the Atheros AP96 reference board.
3 #
4 # The AP96 has the following hardware:
5 #
6 # + AR7161 CPU SoC
7 # + AR9223 2.4GHz 11n
8 # + AR9220 5GHz 11n
9 # + AR8316 10/100/1000 switch
10 # + m25p64 based 8MB flash
11 # + 64mb RAM
12 # + uboot environment
13
14 # $FreeBSD: releng/11.2/sys/mips/conf/AP96 295945 2016-02-24 00:39:36Z sobomax $
15
16 #NO_UNIVERSE
17
18 include "AR71XX_BASE"
19 ident "AP96"
20 hints "AP96.hints"
21
22 options AR71XX_REALMEM=64*1024*1024
23
24 options AR71XX_ENV_UBOOT
25
26 # For DOS - enable if required
27 options MSDOSFS
28
29 # uncompress - to boot read-only lzma natively from flash
30 device geom_uzip
31 options GEOM_UZIP
32 options ROOTDEVNAME=\"ufs:/dev/map/rootfs.uzip\"
33
34 # Used for the static uboot partition map
35 device geom_map
36
37 # Options needed for the EEPROM based calibration/PCI configuration data.
38 options AR71XX_ATH_EEPROM # Fetch EEPROM/PCI config from flash
39 options ATH_EEPROM_FIRMWARE # Use EEPROM from flash
40 device firmware # Used by the above
41
42 # Options required for miiproxy and mdiobus
43 options ARGE_MDIO # Export an MDIO bus separate from arge
44 device miiproxy # MDIO bus <-> MII PHY rendezvous
45
46 device etherswitch
47 device arswitch
Cache object: bc53e9821094eac226f2e76c96b81cf4
|