The Design and Implementation of the FreeBSD Operating System, Second Edition
Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

FreeBSD/Linux Kernel Cross Reference
sys/mips/conf/AR934X_BASE.hints

Version: -  FREEBSD  -  FREEBSD-12-STABLE  -  FREEBSD-12-0  -  FREEBSD-11-STABLE  -  FREEBSD-11-2  -  FREEBSD-11-1  -  FREEBSD-11-0  -  FREEBSD-10-STABLE  -  FREEBSD-10-4  -  FREEBSD-10-3  -  FREEBSD-10-2  -  FREEBSD-10-1  -  FREEBSD-10-0  -  FREEBSD-9-STABLE  -  FREEBSD-9-3  -  FREEBSD-9-2  -  FREEBSD-9-1  -  FREEBSD-9-0  -  FREEBSD-8-STABLE  -  FREEBSD-8-4  -  FREEBSD-8-3  -  FREEBSD-8-2  -  FREEBSD-8-1  -  FREEBSD-8-0  -  FREEBSD-7-STABLE  -  FREEBSD-7-4  -  FREEBSD-7-3  -  FREEBSD-7-2  -  FREEBSD-7-1  -  FREEBSD-7-0  -  FREEBSD-6-STABLE  -  FREEBSD-6-4  -  FREEBSD-6-3  -  FREEBSD-6-2  -  FREEBSD-6-1  -  FREEBSD-6-0  -  FREEBSD-5-STABLE  -  FREEBSD-5-5  -  FREEBSD-5-4  -  FREEBSD-5-3  -  FREEBSD-5-2  -  FREEBSD-5-1  -  FREEBSD-5-0  -  FREEBSD-4-STABLE  -  FREEBSD-3-STABLE  -  FREEBSD22  -  linux-2.6  -  linux-2.4.22  -  MK83  -  MK84  -  PLAN9  -  DFBSD  -  NETBSD  -  NETBSD5  -  NETBSD4  -  NETBSD3  -  NETBSD20  -  OPENBSD  -  xnu-517  -  xnu-792  -  xnu-792.6.70  -  xnu-1228  -  xnu-1456.1.26  -  xnu-1699.24.8  -  xnu-2050.18.24  -  OPENSOLARIS  -  minix-3-1-1 
SearchContext: -  none  -  3  -  10 

    1 # This file (and the kernel config file accompanying it) are not designed 
    2 # to be used by themselves. Instead, users of this file should create a
    3 # kernel # config file which includes this file (which gets the basic hints),
    4 # then override the default options (adding devices as needed) and adding
    5 # hints as needed (for example, the GPIO and LAN PHY.)
    6 
    7 # $FreeBSD: stable/10/sys/mips/conf/AR934X_BASE.hints 253512 2013-07-21 04:00:48Z adrian $
    8 
    9 hint.apb.0.at="nexus0"
   10 hint.apb.0.irq=4
   11 
   12 # uart0
   13 hint.uart.0.at="apb0"
   14 # NB: This isn't an ns8250 UART
   15 hint.uart.0.maddr=0x18020003
   16 hint.uart.0.msize=0x18
   17 hint.uart.0.irq=3
   18 
   19 #ehci - note the 0x100 offset for the AR913x/AR724x
   20 hint.ehci.0.at="nexus0"
   21 hint.ehci.0.maddr=0x1b000100
   22 hint.ehci.0.msize=0x00001000
   23 hint.ehci.0.irq=1
   24 
   25 hint.arge.0.at="nexus0"
   26 hint.arge.0.maddr=0x19000000
   27 hint.arge.0.msize=0x1000
   28 hint.arge.0.irq=2
   29 
   30 hint.arge.1.at="nexus0"
   31 hint.arge.1.maddr=0x1a000000
   32 hint.arge.1.msize=0x1000
   33 hint.arge.1.irq=3
   34 
   35 # XXX The ath device hangs off of the AHB, rather than the Nexus.
   36 hint.ath.0.at="nexus0"
   37 hint.ath.0.maddr=0x18100000
   38 hint.ath.0.msize=0x20000
   39 hint.ath.0.irq=0
   40 hint.ath.0.vendor_id=0x168c
   41 hint.ath.0.device_id=0x0031
   42 # Set this to define where the ath calibration data
   43 # should be fetched from in physical memory.
   44 # hint.ath.0.eepromaddr=0x1fff1000
   45 
   46 # SPI flash
   47 hint.spi.0.at="nexus0"
   48 hint.spi.0.maddr=0x1f000000
   49 hint.spi.0.msize=0x10
   50 
   51 hint.mx25l.0.at="spibus0"
   52 hint.mx25l.0.cs=0
   53 
   54 # Watchdog
   55 hint.ar71xx_wdog.0.at="nexus0"
   56 
   57 # The GPIO function and pin mask is configured per-board
   58 hint.gpio.0.at="apb0"
   59 hint.gpio.0.maddr=0x18040000
   60 hint.gpio.0.msize=0x1000
   61 hint.gpio.0.irq=2

Cache object: a6d2796d5bb2970d0e9c6eb7ac33d550


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]


This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.