The Design and Implementation of the FreeBSD Operating System, Second Edition
Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

FreeBSD/Linux Kernel Cross Reference
sys/mips/conf/CARAMBOLA2.hints

Version: -  FREEBSD  -  FREEBSD-13-STABLE  -  FREEBSD-13-0  -  FREEBSD-12-STABLE  -  FREEBSD-12-0  -  FREEBSD-11-STABLE  -  FREEBSD-11-0  -  FREEBSD-10-STABLE  -  FREEBSD-10-0  -  FREEBSD-9-STABLE  -  FREEBSD-9-0  -  FREEBSD-8-STABLE  -  FREEBSD-8-0  -  FREEBSD-7-STABLE  -  FREEBSD-7-0  -  FREEBSD-6-STABLE  -  FREEBSD-6-0  -  FREEBSD-5-STABLE  -  FREEBSD-5-0  -  FREEBSD-4-STABLE  -  FREEBSD-3-STABLE  -  FREEBSD22  -  l41  -  OPENBSD  -  linux-2.6  -  MK84  -  PLAN9  -  xnu-8792 
SearchContext: -  none  -  3  -  10 

    1 #
    2 # This file adds to the values in AR91XX_BASE.hints.
    3 #
    4 # $FreeBSD$
    5 
    6 # mdiobus on arge1
    7 hint.argemdio.0.at="nexus0"
    8 hint.argemdio.0.maddr=0x1a000000
    9 hint.argemdio.0.msize=0x1000
   10 hint.argemdio.0.order=0
   11 
   12 # Embedded Atheros Switch
   13 hint.arswitch.0.at="mdio0"
   14 
   15 # XXX this should really say it's an AR933x switch, as there
   16 # are some vlan specific differences here!
   17 hint.arswitch.0.is_7240=1
   18 hint.arswitch.0.numphys=4
   19 hint.arswitch.0.phy4cpu=1       # phy 4 is a "CPU" separate PHY
   20 hint.arswitch.0.is_rgmii=0
   21 hint.arswitch.0.is_gmii=1       # arge1 <-> switch PHY is GMII
   22 
   23 # arge0 - MII, autoneg, phy(4)
   24 hint.arge.0.phymask=0x10        # PHY4
   25 hint.arge.0.mdio=mdioproxy1     # .. off of the switch mdiobus
   26 hint.arge.0.eeprommac=0x1fff0000
   27 
   28 # arge1 - GMII, 1000/full
   29 hint.arge.1.phymask=0x0         # No directly mapped PHYs
   30 hint.arge.1.media=1000
   31 hint.arge.1.fduplex=1
   32 hint.arge.1.eeprommac=0x1fff0006
   33 
   34 # Where the ART is - last 64k in the flash
   35 # 0x9fff1000 ?
   36 hint.ath.0.eepromaddr=0x1fff0000
   37 hint.ath.0.eepromsize=16384
   38 
   39 # The AP121 16MB flash layout:
   40 #
   41 # [    0.700000] 0x000000000000-0x000000040000 : "u-boot"
   42 # [    0.710000] 0x000000040000-0x000000050000 : "u-boot-env"
   43 # [    0.710000] 0x000000050000-0x000000250000 : "kernel"
   44 # [    0.720000] 0x000000250000-0x000000fe0000 : "rootfs"
   45 # [    0.720000] mtd: partition "rootfs" set to be root filesystem
   46 # [    0.730000] mtd: partition "rootfs_data" created automatically, ofs=480000, len=B60000 
   47 # [    0.740000] 0x000000480000-0x000000fe0000 : "rootfs_data"
   48 # [    0.740000] 0x000000fe0000-0x000000ff0000 : "nvram"
   49 # [    0.750000] 0x000000ff0000-0x000001000000 : "art"
   50 # [    0.750000] 0x000000050000-0x000000fe0000 : "firmware"
   51 
   52 hint.map.0.at="flash/spi0"
   53 hint.map.0.start=0x00000000
   54 hint.map.0.end=0x000040000
   55 hint.map.0.name="uboot"
   56 hint.map.0.readonly=1
   57 
   58 hint.map.1.at="flash/spi0"
   59 hint.map.1.start=0x00040000
   60 hint.map.1.end=0x00050000
   61 hint.map.1.name="uboot-env"
   62 hint.map.1.readonly=0
   63 
   64 hint.map.2.at="flash/spi0"
   65 hint.map.2.start=0x00050000
   66 hint.map.2.end="search:0x00050000:0x10000:.!/bin/sh"
   67 hint.map.2.name="kernel"
   68 hint.map.2.readonly=0
   69 
   70 hint.map.3.at="flash/spi0"
   71 hint.map.3.start="search:0x00050000:0x10000:.!/bin/sh"
   72 hint.map.3.end=0x00fe0000
   73 hint.map.3.name="rootfs"
   74 hint.map.3.readonly=0
   75 
   76 hint.map.4.at="flash/spi0"
   77 hint.map.4.start=0x00fe0000
   78 hint.map.4.end=0x00ff0000
   79 hint.map.4.name="cfg"
   80 hint.map.4.readonly=0
   81 
   82 # This is radio calibration section.  It is (or should be!) unique
   83 # for each board, to take into account thermal and electrical differences
   84 # as well as the regulatory compliance data.
   85 #
   86 hint.map.5.at="flash/spi0"
   87 hint.map.5.start=0x00ff0000
   88 hint.map.5.end=0x01000000
   89 hint.map.5.name="art"
   90 hint.map.5.readonly=1
   91 
   92 # GPIO specific configuration block
   93 
   94 # Don't flip on anything that isn't already enabled.
   95 # This includes leaving the SPI CS1/CS2 pins as GPIO pins as they're
   96 # not used here.
   97 hint.gpio.0.function_set=0x00000000
   98 hint.gpio.0.function_clear=0x00000000
   99 
  100 # These are the GPIO LEDs and buttons which can be software controlled.
  101 hint.gpio.0.pinmask=0x00fc1803

Cache object: 67482ec4cf072a0b33dcf78b6eabad99


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]


This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.