FreeBSD/Linux Kernel Cross Reference
sys/mips/conf/DB120
1 #
2 # DB120 - the AR9344 SoC reference design
3 #
4 # $FreeBSD: releng/11.0/sys/mips/conf/DB120 295945 2016-02-24 00:39:36Z sobomax $
5 #
6
7 # Include the default AR934x parameters
8 include "AR934X_BASE"
9
10 #NO_UNIVERSE
11
12 ident DB120
13
14 # Override hints with board values
15 hints "DB120.hints"
16
17 # Force the board memory - the base DB120 has 128MB RAM
18 options AR71XX_REALMEM=(128*1024*1024)
19
20 # i2c GPIO bus
21 #device gpioiic
22 #device iicbb
23 #device iicbus
24 #device iic
25
26 # Options required for miiproxy and mdiobus
27 options ARGE_MDIO # Export an MDIO bus separate from arge
28 device miiproxy # MDIO bus <-> MII PHY rendezvous
29
30 device etherswitch
31 device arswitch
32
33 # read MSDOS formatted disks - USB
34 #options MSDOSFS
35
36 # Enable the uboot environment stuff rather then the
37 # redboot stuff.
38 options AR71XX_ENV_UBOOT
39
40 # uzip - to boot natively from flash
41 device geom_uzip
42 options GEOM_UZIP
43
44 # Used for the static uboot partition map
45 device geom_map
46
47 # yes, this board has a PCI connected atheros device
48 device ath_pci
49 options AR71XX_ATH_EEPROM
50 device firmware # Used by the above
51 options ATH_EEPROM_FIRMWARE
52
53 # Boot off of the rootfs, as defined in the geom_map setup.
54 options ROOTDEVNAME=\"ufs:map/rootfs.uzip\"
Cache object: 4e6e7be5d89ca3501ae711394bcc5b1a
|