1 #
2 # DIR-655A1 - 3x3 2GHz D-Link AP
3 #
4 # This contains a QCA9558 MIPS74k SoC with on-board 3x3 2GHz wifi,
5 # 128MiB RAM, an AR8327 5-port gigabit ethernet switch.
6 #
7 # $FreeBSD$
8 #
9
10 #NO_UNIVERSE
11
12 # Include the default QCA955x parameters
13 include "std.QCA955X"
14
15 ident DIR-655A1
16
17 # Override hints with board values
18 hints "DIR-655A1.hints"
19
20 # Force the board memory - the base AP135 has 128MB RAM
21 options AR71XX_REALMEM=(128*1024*1024)
22
23 # i2c GPIO bus
24 #device gpioiic
25 #device iicbb
26 #device iicbus
27 #device iic
28
29 # Options required for miiproxy and mdiobus
30 options ARGE_MDIO # Export an MDIO bus separate from arge
31 device miiproxy # MDIO bus <-> MII PHY rendezvous
32
33 device etherswitch
34 device arswitch
35
36 # read MSDOS formatted disks - USB
37 #options MSDOSFS
38
39 # Enable the uboot environment stuff rather then the
40 # redboot stuff.
41 options AR71XX_ENV_UBOOT
42
43 # uzip - to boot natively from flash
44 device xz
45 options GEOM_UZIP
46
47 # Used for the static uboot partition map
48 device geom_map
49
50 options AR71XX_ATH_EEPROM
51 device firmware # Used by the above
52 options ATH_EEPROM_FIRMWARE
53
54 # Boot off of the rootfs, as defined in the geom_map setup.
55 options ROOTDEVNAME=\"ufs:map/rootfs.uzip\"
56
57 # Default to accept
58 options IPFIREWALL_DEFAULT_TO_ACCEPT
Cache object: 3dbfef7d9357d40ac096b2e18d8c4e93
|