1 # $FreeBSD$
2 #
3 # Specific board setup for the D-Link DIR-825C1 router.
4 #
5 # The DIR-825C1 has the following hardware:
6 #
7 # + AR9344 CPU SoC 74k MIPS
8 # + ARxxx 2.4GHz 11n
9 # + ARXXX 5GHz 11n
10 # + AR8327 Gigabit switch
11 # + m25p80 based 16MB flash
12 # + 128MB RAM
13 # + uboot environment
14
15 #NO_UNIVERSE
16
17 # Include the default AR934x parameters
18 include "AR934X_BASE"
19 ident DIR825C1
20
21 # Override hints with board values
22 hints "DIR-825C1.hints"
23
24 # Force the board memory - the base DB120 has 128MB RAM
25 options AR71XX_REALMEM=(128*1024*1024)
26
27 # i2c GPIO bus
28 device gpioiic
29 device iicbb
30 device iicbus
31 device iic
32
33 # Options required for miiproxy and mdiobus
34 options ARGE_MDIO # Export an MDIO bus separate from arge
35 device miiproxy # MDIO bus <-> MII PHY rendezvous
36
37 device etherswitch
38 device arswitch
39
40 # read MSDOS formatted disks - USB
41 options MSDOSFS
42
43 # Enable the uboot environment stuff rather then the
44 # redboot stuff.
45 options AR71XX_ENV_UBOOT
46
47 # Used for the static uboot partition map
48 device geom_map
49
50 # uzip - to boot natively from flash
51 options GEOM_UZIP
52 options GEOM_PART_GPT
53
54 # yes, this board has a PCI connected atheros device
55 device ath_pci
56 options AR71XX_ATH_EEPROM
57 device firmware # Used by the above
58 options ATH_EEPROM_FIRMWARE
59
60 # Boot off of the rootfs, as defined in the geom_map setup.
61 options ROOTDEVNAME=\"ufs:map/rootfs.uzip\"
62
63 # In order to netboot, you have to build the mfsroot into the kernel
64 # 19443712 or 19M is the biggest rootfs via netboot this thing supports
65 #options MD_ROOT # md device usable as a potential root device
66 #options MD_ROOT_SIZE=19444
67 #makeoptions MFS_IMAGE=/tftpboot/mfsroot-dir825c1.img.ulzma
68 #options ROOTDEVNAME=\"ufs:md0.uzip\"
Cache object: f52fd814d2ab6246230d09f4cefb7d74
|