FreeBSD/Linux Kernel Cross Reference
sys/mips/conf/ENH200
1 #
2 # Specific board setup for the Engenius ENH-200 802.11bgn mesh node.
3 #
4 # The Engenius ENH-200 has the following hardware:
5 #
6 # + AR7240 CPU SoC
7 # + AR9285 Wifi
8 # + Integrated switch
9 # + 8MB flash
10 # + 32MB RAM
11 # + uboot environment
12
13 # $FreeBSD: releng/10.1/sys/mips/conf/ENH200 266331 2014-05-17 17:34:37Z ian $
14
15 include "AR724X_BASE"
16 ident "ENH200"
17 hints "ENH200.hints"
18
19 options AR71XX_REALMEM=32*1024*1024
20
21 options AR71XX_ENV_UBOOT
22
23 # For DOS - enable if required
24 options MSDOSFS
25
26 # uncompress - to boot read-only lzma natively from flash
27 device geom_uncompress
28 options GEOM_UNCOMPRESS
29 options ROOTDEVNAME=\"ufs:/dev/map/rootfs.uncompress\"
30
31 # Used for the static uboot partition map
32 device geom_map
33
34 # Options needed for the EEPROM based calibration/PCI configuration data.
35 options AR71XX_ATH_EEPROM # Fetch EEPROM/PCI config from flash
36 options ATH_EEPROM_FIRMWARE # Use EEPROM from flash
37 device firmware # Used by the above
38
39 # Options required for miiproxy and mdiobus
40 options ARGE_MDIO # Export an MDIO bus separate from arge
41 device miiproxy # MDIO bus <-> MII PHY rendezvous
42
43 device etherswitch
44 device arswitch
Cache object: 84b759d56dfe9bbb9469cb35a97d6277
|