FreeBSD/Linux Kernel Cross Reference
sys/mips/conf/ENH200
1 #
2 # Specific board setup for the Engenius ENH-200 802.11bgn mesh node.
3 #
4 # The Engenius ENH-200 has the following hardware:
5 #
6 # + AR7240 CPU SoC
7 # + AR9285 Wifi
8 # + Integrated switch
9 # + 8MB flash
10 # + 32MB RAM
11 # + uboot environment
12
13 # $FreeBSD$
14
15 #NO_UNIVERSE
16
17 include "AR724X_BASE"
18 ident "ENH200"
19 hints "ENH200.hints"
20
21 options AR71XX_REALMEM=32*1024*1024
22
23 options AR71XX_ENV_UBOOT
24
25 # For DOS - enable if required
26 options MSDOSFS
27
28 # uncompress - to boot read-only lzma natively from flash
29 device xz
30 options GEOM_UZIP
31 options ROOTDEVNAME=\"ufs:/dev/map/rootfs.uzip\"
32
33 # Used for the static uboot partition map
34 device geom_map
35
36 # Options needed for the EEPROM based calibration/PCI configuration data.
37 options AR71XX_ATH_EEPROM # Fetch EEPROM/PCI config from flash
38 options ATH_EEPROM_FIRMWARE # Use EEPROM from flash
39 device firmware # Used by the above
40
41 # Options required for miiproxy and mdiobus
42 options ARGE_MDIO # Export an MDIO bus separate from arge
43 device miiproxy # MDIO bus <-> MII PHY rendezvous
44
45 device etherswitch
46 device arswitch
Cache object: f23fd9950fbd02d0b281a45f634c31ad
|