Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/mips/conf/QCA953X_BASE.hints
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 # This file (and the kernel config file accompanying it) are not designed 2 # to be used by themselves. Instead, users of this file should create a 3 # kernel # config file which includes this file (which gets the basic hints), 4 # then override the default options (adding devices as needed) and adding 5 # hints as needed (for example, the GPIO and LAN PHY.) 6 7 # $FreeBSD: releng/11.1/sys/mips/conf/QCA953X_BASE.hints 291438 2015-11-29 05:49:49Z adrian $ 8 9 hint.apb.0.at="nexus0" 10 hint.apb.0.irq=4 11 12 # mdiobus on arge0 - required to bring up arge0 13 hint.argemdio.0.at="nexus0" 14 hint.argemdio.0.maddr=0x19000000 15 hint.argemdio.0.msize=0x1000 16 hint.argemdio.0.order=0 17 18 # mdiobus on arge1 - this is what the internal switch is hooked into. 19 hint.argemdio.1.at="nexus0" 20 hint.argemdio.1.maddr=0x1a000000 21 hint.argemdio.1.msize=0x1000 22 hint.argemdio.1.order=0 23 24 # uart0 25 hint.uart.0.at="apb0" 26 # see atheros/uart_cpu_ar71xx.c why +3 27 hint.uart.0.maddr=0x18020003 28 hint.uart.0.msize=0x18 29 hint.uart.0.irq=3 30 31 # ehci - on IP3 32 hint.ehci.0.at="nexus0" 33 hint.ehci.0.maddr=0x1b000100 34 hint.ehci.0.msize=0x00ffff00 35 hint.ehci.0.irq=1 36 37 hint.arge.0.at="nexus0" 38 hint.arge.0.maddr=0x19000000 39 hint.arge.0.msize=0x1000 40 hint.arge.0.irq=2 41 42 hint.arge.1.at="nexus0" 43 hint.arge.1.maddr=0x1a000000 44 hint.arge.1.msize=0x1000 45 hint.arge.1.irq=3 46 47 # XXX The ath device hangs off of the AHB, rather than the Nexus. 48 hint.ath.0.at="nexus0" 49 hint.ath.0.maddr=0x18100000 50 hint.ath.0.msize=0x20000 51 hint.ath.0.irq=0 52 hint.ath.0.vendor_id=0x168c 53 hint.ath.0.device_id=0x003d 54 # Set this to define where the ath calibration data 55 # should be fetched from in physical memory. 56 # hint.ath.0.eepromaddr=0x1fff1000 57 58 # SPI flash 59 hint.spi.0.at="nexus0" 60 hint.spi.0.maddr=0x1f000000 61 hint.spi.0.msize=0x10 62 63 hint.mx25l.0.at="spibus0" 64 hint.mx25l.0.cs=0 65 66 # Watchdog 67 hint.ar71xx_wdog.0.at="nexus0" 68 69 # The GPIO function and pin mask is configured per-board 70 hint.gpio.0.at="apb0" 71 hint.gpio.0.maddr=0x18040000 72 hint.gpio.0.msize=0x1000 73 hint.gpio.0.irq=2
Cache object: fe5cfba3e8c3a3ded3c120935ff79e53
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]