The Design and Implementation of the FreeBSD Operating System, Second Edition
Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

FreeBSD/Linux Kernel Cross Reference
sys/mips/conf/QCA955X_BASE.hints

Version: -  FREEBSD  -  FREEBSD-13-STABLE  -  FREEBSD-13-0  -  FREEBSD-12-STABLE  -  FREEBSD-12-0  -  FREEBSD-11-STABLE  -  FREEBSD-11-0  -  FREEBSD-10-STABLE  -  FREEBSD-10-0  -  FREEBSD-9-STABLE  -  FREEBSD-9-0  -  FREEBSD-8-STABLE  -  FREEBSD-8-0  -  FREEBSD-7-STABLE  -  FREEBSD-7-0  -  FREEBSD-6-STABLE  -  FREEBSD-6-0  -  FREEBSD-5-STABLE  -  FREEBSD-5-0  -  FREEBSD-4-STABLE  -  FREEBSD-3-STABLE  -  FREEBSD22  -  l41  -  OPENBSD  -  linux-2.6  -  MK84  -  PLAN9  -  xnu-8792 
SearchContext: -  none  -  3  -  10 

    1 # This file (and the kernel config file accompanying it) are not designed
    2 # to be used by themselves. Instead, users of this file should create a
    3 # kernel config file which includes this file (which gets the basic hints),
    4 # then override the default options (adding devices as needed) and adding
    5 # hints as needed (for example, the GPIO and LAN PHY.)
    6 
    7 # $FreeBSD: releng/11.1/sys/mips/conf/QCA955X_BASE.hints 285077 2015-07-03 06:06:44Z adrian $
    8 
    9 hint.apb.0.at="nexus0"
   10 # The default APB is on IP6 (irq4); we need to add
   11 # the two new ones (IP2, IP3) to this and extend
   12 # the irq ranges appropriately.
   13 hint.apb.0.irq=4
   14 
   15 # uart0
   16 hint.uart.0.at="apb0"
   17 # NB: This isn't an ns8250 UART
   18 hint.uart.0.maddr=0x18020003
   19 hint.uart.0.msize=0x18
   20 hint.uart.0.irq=3
   21 
   22 # ehci - on IP3
   23 hint.ehci.0.at="nexus0"
   24 hint.ehci.0.maddr=0x1b000100
   25 hint.ehci.0.msize=0x00001000
   26 hint.ehci.0.irq=1
   27 
   28 hint.ehci.1.at="nexus0"
   29 hint.ehci.1.maddr=0x1b400100
   30 hint.ehci.1.msize=0x00001000
   31 hint.ehci.1.irq=1
   32 
   33 # PCIe 1: qca955x_int0 (IP2)
   34 
   35 # pci - XXX no maddr/msize, grr!
   36 hint.pcib.0.at="nexus0"
   37 hint.pcib.0.irq=0
   38 
   39 # PCIe 1: qca955x_int1 (IP3)
   40 hint.pcib.1.at="nexus0"
   41 hint.pcib.1.irq=1
   42 
   43 # IP4
   44 hint.arge.0.at="nexus0"
   45 hint.arge.0.maddr=0x19000000
   46 hint.arge.0.msize=0x1000
   47 hint.arge.0.irq=2
   48 
   49 # IP5
   50 hint.arge.1.at="nexus0"
   51 hint.arge.1.maddr=0x1a000000
   52 hint.arge.1.msize=0x1000
   53 hint.arge.1.irq=3
   54 
   55 # ath0 - connected via IP2 mux
   56 hint.ath.0.at="nexus0"
   57 hint.ath.0.maddr=0x18100000
   58 hint.ath.0.msize=0x20000
   59 hint.ath.0.irq=0
   60 hint.ath.0.vendor_id=0x168c
   61 hint.ath.0.device_id=0x0039
   62 # Set this to define where the ath calibration data
   63 # should be fetched from in physical memory.
   64 # hint.ath.0.eepromaddr=0x1fff1000
   65 
   66 # SPI flash
   67 hint.spi.0.at="nexus0"
   68 hint.spi.0.maddr=0x1f000000
   69 hint.spi.0.msize=0x10
   70 
   71 hint.mx25l.0.at="spibus0"
   72 hint.mx25l.0.cs=0
   73 
   74 # Watchdog
   75 hint.ar71xx_wdog.0.at="nexus0"
   76 
   77 # The GPIO function and pin mask is configured per-board
   78 hint.gpio.0.at="apb0"
   79 hint.gpio.0.maddr=0x18040000
   80 hint.gpio.0.msize=0x1000
   81 hint.gpio.0.irq=2

Cache object: 184acd3b796be1a6ae52738b5e18fc6f


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]


This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.