Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/mips/conf/QCA955X_BASE.hints
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 # This file (and the kernel config file accompanying it) are not designed 2 # to be used by themselves. Instead, users of this file should create a 3 # kernel config file which includes this file (which gets the basic hints), 4 # then override the default options (adding devices as needed) and adding 5 # hints as needed (for example, the GPIO and LAN PHY.) 6 7 # $FreeBSD: releng/12.0/sys/mips/conf/QCA955X_BASE.hints 328755 2018-02-01 22:00:05Z adrian $ 8 9 hint.apb.0.at="nexus0" 10 # The default APB is on IP6 (irq4); we need to add 11 # the two new ones (IP2, IP3) to this and extend 12 # the irq ranges appropriately. 13 hint.apb.0.irq=4 14 15 # ART calibration data mapping device 16 hint.ar71xx_caldata.0.at="nexus0" 17 hint.ar71xx_caldata.0.order=0 18 19 # uart0 20 hint.uart.0.at="apb0" 21 # NB: This isn't an ns8250 UART 22 hint.uart.0.maddr=0x18020003 23 hint.uart.0.msize=0x18 24 hint.uart.0.irq=3 25 26 # ehci - on IP3 27 hint.ehci.0.at="nexus0" 28 hint.ehci.0.maddr=0x1b000100 29 hint.ehci.0.msize=0x00001000 30 hint.ehci.0.irq=1 31 32 hint.ehci.1.at="nexus0" 33 hint.ehci.1.maddr=0x1b400100 34 hint.ehci.1.msize=0x00001000 35 hint.ehci.1.irq=1 36 37 # PCIe 1: qca955x_int0 (IP2) 38 39 # pci - XXX no maddr/msize, grr! 40 hint.pcib.0.at="nexus0" 41 hint.pcib.0.irq=0 42 43 # PCIe 1: qca955x_int1 (IP3) 44 hint.pcib.1.at="nexus0" 45 hint.pcib.1.irq=1 46 47 # IP4 48 hint.arge.0.at="nexus0" 49 hint.arge.0.maddr=0x19000000 50 hint.arge.0.msize=0x1000 51 hint.arge.0.irq=2 52 53 # IP5 54 hint.arge.1.at="nexus0" 55 hint.arge.1.maddr=0x1a000000 56 hint.arge.1.msize=0x1000 57 hint.arge.1.irq=3 58 59 # ath0 - connected via IP2 mux 60 hint.ath.0.at="nexus0" 61 hint.ath.0.maddr=0x18100000 62 hint.ath.0.msize=0x20000 63 hint.ath.0.irq=0 64 hint.ath.0.vendor_id=0x168c 65 hint.ath.0.device_id=0x0039 66 67 # Where the ART is - last 64k in the first 8MB of flash 68 #hint.ar71xx_caldata.0.map.0.ath_fixup_addr=0x1fff0000 69 #hint.ar71xx_caldata.0.map.0.ath_fixup_size=16384 70 71 # And now tell the ath(4) driver where to look! 72 #hint.ath.0.eeprom_firmware="ar71xx_caldata.0.map.0.eeprom_firmware" 73 74 # SPI flash 75 hint.spi.0.at="nexus0" 76 hint.spi.0.maddr=0x1f000000 77 hint.spi.0.msize=0x10 78 79 hint.mx25l.0.at="spibus0" 80 hint.mx25l.0.cs=0 81 82 # Watchdog 83 hint.ar71xx_wdog.0.at="nexus0" 84 85 # The GPIO function and pin mask is configured per-board 86 hint.gpio.0.at="apb0" 87 hint.gpio.0.maddr=0x18040000 88 hint.gpio.0.msize=0x1000 89 hint.gpio.0.irq=2
Cache object: 452801aac4be0c2c3db60cddb1d37a2e
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]