1 #
2 # TPLink TL-WDR4300 - AR9344 based dual-band 2x2 wifi
3 #
4 # $FreeBSD$
5 #
6
7 #NO_UNIVERSE
8
9 # Include the default AR934x parameters
10 include "std.AR934X"
11
12 ident TL-WDR4300
13
14 # Override hints with board values
15 hints "TL-WDR4300.hints"
16
17 # Force the board memory - the base DB120 has 128MB RAM
18 options AR71XX_REALMEM=(128*1024*1024)
19
20 # i2c GPIO bus
21 #device gpioiic
22 #device iicbb
23 #device iicbus
24 #device iic
25
26 # Options required for miiproxy and mdiobus
27 options ARGE_DEBUG
28 options ARGE_MDIO # Export an MDIO bus separate from arge
29 device miiproxy # MDIO bus <-> MII PHY rendezvous
30
31 device etherswitch
32 device arswitch
33
34 # read MSDOS formatted disks - USB
35 options MSDOSFS
36
37 # Enable the uboot environment stuff rather then the
38 # redboot stuff.
39 options AR71XX_ENV_UBOOT
40
41 # uzip - to boot natively from flash
42 device xz
43 options GEOM_UZIP
44
45 # Used for the static uboot partition map
46 device geom_map
47
48 # Yes, this board has a PCI connected atheros device
49 options AR71XX_ATH_EEPROM
50 device firmware # Used by the above
51 options ATH_EEPROM_FIRMWARE
52
53 # Boot off of the rootfs, as defined in the geom_map setup.
54 options ROOTDEVNAME=\"ufs:map/rootfs.uzip\"
Cache object: 50a8099c1d2ba66113eb8eb53d2db6db
|