1 #
2 # TP Link MR3020 - an AR9331 based SoC wifi device.
3 #
4 # This is for the 32 RAM/4 flash part. There is little to no
5 # chance that this will ever boot FreeBSD directly from the 3.5MB
6 # of flash. The kernel can fit into the space, but userland is just
7 # too big even when stripped down to its limits.
8 #
9 # * AR9331 SoC
10 # * 32MB RAM
11 # * 4MB flash
12 # * Integrated 1x1 2GHz wifi and 10/100 bridge
13 # * USB powered
14 # * USB storage
15 #
16 # $FreeBSD: releng/11.0/sys/mips/conf/TP-MR3020 291049 2015-11-19 01:58:12Z imp $
17 #
18
19 #NO_UNIVERSE
20
21 # Include the default AR933x parameters
22 include "AR933X_BASE"
23
24 ident TP-MR3020
25
26 # Override hints with board values
27 hints "TP-MR3020.hints"
28
29 # Board memory - 32MB
30 options AR71XX_REALMEM=(32*1024*1024)
31
32 # Disable support for paging
33 options NO_SWAPPING
34
35 # i2c GPIO bus
36 device gpioiic
37 device iicbb
38 device iicbus
39 device iic
40
41 # Options required for miiproxy and mdiobus
42 options ARGE_MDIO # Export an MDIO bus separate from arge
43 device miiproxy # MDIO bus <-> MII PHY rendezvous
44
45 device etherswitch
46 device arswitch
47
48 # Enable the uboot environment stuff rather then the
49 # redboot stuff.
50 options AR71XX_ENV_UBOOT
51
52 # Used for the static uboot partition map
53 device geom_map
54
55 # With only 4MB of flash, we are stuck using USB
56 # for the rootfs.
57 options ROOTDEVNAME=\"ufs:da0\"
Cache object: 9a6a494d090f20252b8444ad1d2c9c70
|