Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/mips/conf/TP-MR3040.hints
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 # 2 # This file adds to the values in AR933X_BASE.hints 3 # 4 # $FreeBSD: releng/12.0/sys/mips/conf/TP-MR3040.hints 314481 2017-03-01 05:53:53Z imp $ 5 6 # mdiobus on arge1 7 hint.argemdio.0.at="nexus0" 8 hint.argemdio.0.maddr=0x1a000000 9 hint.argemdio.0.msize=0x1000 10 hint.argemdio.0.order=0 11 12 # There's no need to set the ar933x GMAC configuration bits. 13 # This just creates a switch instance and correctly uses it. 14 15 # Embedded Atheros Switch 16 hint.arswitch.0.at="mdio0" 17 18 # XXX this should really say it's an AR933x switch, as there 19 # are some vlan specific differences here! 20 hint.arswitch.0.is_7240=1 21 hint.arswitch.0.numphys=4 22 hint.arswitch.0.phy4cpu=1 # phy 4 is a "CPU" separate PHY 23 hint.arswitch.0.is_rgmii=0 24 hint.arswitch.0.is_gmii=1 # arge1 <-> switch PHY is GMII 25 26 # arge0 - MII, autoneg, phy(4) 27 hint.arge.0.phymask=0x10 # PHY4 28 hint.arge.0.mdio=mdioproxy1 # .. off of the switch mdiobus 29 30 # arge1 - GMII, 1000/full 31 hint.arge.1.phymask=0x0 # No directly mapped PHYs 32 hint.arge.1.media=1000 33 hint.arge.1.fduplex=1 34 35 # Where the ART is - last 64k in the flash 36 # 0x9fff1000 ? 37 hint.ath.0.eepromaddr=0x1fff0000 38 hint.ath.0.eepromsize=16384 39 40 # The board 16MiB flash layout in uboot env: 41 # 42 # 256k(u-boot),64k(u-boot-env),2752k(rootfs),896k(uImage),64k(NVRAM),64k(ART) 43 44 # However, it boots from 0x9f050000, which is the front of the flsah! 45 # Thus the kernel/rootfs are switched around. 46 47 # 256KB 48 hint.map.0.at="flash/spi0" 49 hint.map.0.start=0x00000000 50 hint.map.0.end=0x00040000 51 hint.map.0.name="uboot" 52 hint.map.0.readonly=1 53 54 # 64KB 55 hint.map.1.at="flash/spi0" 56 hint.map.1.start=0x00040000 57 hint.map.1.end=0x00050000 58 hint.map.1.name="uboot-env" 59 hint.map.1.readonly=0 60 61 # 2752KB 62 hint.map.2.at="flash/spi0" 63 hint.map.2.start=0x00050000 64 hint.map.2.end="search:0x00100000:0x10000:.!/bin/sh" 65 hint.map.2.name="kernel" 66 hint.map.2.readonly=0 67 68 # 896KB 69 hint.map.3.at="flash/spi0" 70 hint.map.3.start="search:0x00100000:0x10000:.!/bin/sh" 71 hint.map.3.end=0x003e0000 72 hint.map.3.name="rootfs" 73 hint.map.3.readonly=0 74 75 # 64K NVRAM 76 hint.map.4.at="flash/spi0" 77 hint.map.4.start=0x003e0000 78 hint.map.4.end=0x003f0000 79 hint.map.4.name="cfg" 80 hint.map.4.readonly=0 81 82 # 64K ART 83 hint.map.5.at="flash/spi0" 84 hint.map.5.start=0x003f0000 85 hint.map.5.end=0x00400000 86 hint.map.5.name="art" 87 hint.map.5.readonly=1 88 89 # GPIO specific configuration block 90 91 # Don't flip on anything that isn't already enabled. 92 # This includes leaving the SPI CS1/CS2 pins as GPIO pins as they're 93 # not used here. 94 hint.gpio.0.function_set=0x00000000 95 hint.gpio.0.function_clear=0x00000000 96 97 # These are the GPIO LEDs and buttons which can be software controlled. 98 #hint.gpio.0.pinmask=0x001c02ae 99 #hint.gpio.0.pinmask=0x00001803 100 101 # XXX TODO: the button and LEDs!
Cache object: ad950613e695feaf735bb290ae25c54d
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]