The Design and Implementation of the FreeBSD Operating System, Second Edition
Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

FreeBSD/Linux Kernel Cross Reference
sys/mips/conf/WZR-300HP.hints

Version: -  FREEBSD  -  FREEBSD-12-STABLE  -  FREEBSD-12-0  -  FREEBSD-11-STABLE  -  FREEBSD-11-2  -  FREEBSD-11-1  -  FREEBSD-11-0  -  FREEBSD-10-STABLE  -  FREEBSD-10-4  -  FREEBSD-10-3  -  FREEBSD-10-2  -  FREEBSD-10-1  -  FREEBSD-10-0  -  FREEBSD-9-STABLE  -  FREEBSD-9-3  -  FREEBSD-9-2  -  FREEBSD-9-1  -  FREEBSD-9-0  -  FREEBSD-8-STABLE  -  FREEBSD-8-4  -  FREEBSD-8-3  -  FREEBSD-8-2  -  FREEBSD-8-1  -  FREEBSD-8-0  -  FREEBSD-7-STABLE  -  FREEBSD-7-4  -  FREEBSD-7-3  -  FREEBSD-7-2  -  FREEBSD-7-1  -  FREEBSD-7-0  -  FREEBSD-6-STABLE  -  FREEBSD-6-4  -  FREEBSD-6-3  -  FREEBSD-6-2  -  FREEBSD-6-1  -  FREEBSD-6-0  -  FREEBSD-5-STABLE  -  FREEBSD-5-5  -  FREEBSD-5-4  -  FREEBSD-5-3  -  FREEBSD-5-2  -  FREEBSD-5-1  -  FREEBSD-5-0  -  FREEBSD-4-STABLE  -  FREEBSD-3-STABLE  -  FREEBSD22  -  linux-2.6  -  linux-2.4.22  -  MK83  -  MK84  -  PLAN9  -  DFBSD  -  NETBSD  -  NETBSD5  -  NETBSD4  -  NETBSD3  -  NETBSD20  -  OPENBSD  -  xnu-517  -  xnu-792  -  xnu-792.6.70  -  xnu-1228  -  xnu-1456.1.26  -  xnu-1699.24.8  -  xnu-2050.18.24  -  OPENSOLARIS  -  minix-3-1-1 
SearchContext: -  none  -  3  -  10 

    1 # $FreeBSD: releng/10.3/sys/mips/conf/WZR-300HP.hints 255659 2013-09-17 22:26:07Z sbruno $
    2 
    3 # arge0 is connected to the LAN side of the switch PHY.
    4 # arge1 is connected to the single port WAN side of the switch PHY.
    5 
    6 # arge1 MDIO bus
    7 hint.argemdio.0.at="nexus0"
    8 hint.argemdio.0.maddr=0x1a000000
    9 hint.argemdio.0.msize=0x1000
   10 hint.argemdio.0.order=0
   11 
   12 hint.arge.0.phymask=0x0
   13 hint.arge.0.media=1000
   14 hint.arge.0.fduplex=1
   15 hint.arge.0.eeprommac=0x1f05120c
   16 hint.arge.0.mdio=mdioproxy1     # .. off of the switch mdiobus
   17 
   18 
   19 # arge1: nail to 1000/full, RMII - connected to the switch
   20 hint.arge.1.media=1000          # Map to 1000/full
   21 hint.arge.1.fduplex=1           #
   22 hint.arge.1.phymask=0x0         # no directly mapped PHYs
   23 
   24 #
   25 # AR7240 switch config
   26 #
   27 hint.arswitch.0.at="mdio0"
   28 hint.arswitch.0.is_7240=1       # We need to be explicitly told this
   29 hint.arswitch.0.numphys=4       # 4 active switch PHYs (PHY 0 -> 3)
   30 hint.arswitch.0.phy4cpu=1       # Yes, PHY 4 == dedicated PHY
   31 hint.arswitch.0.is_rgmii=0      # No, not RGMII
   32 hint.arswitch.0.is_gmii=0       # No, not GMII
   33 
   34 # ath0 - slot 0
   35 hint.pcib.0.bus.0.0.0.ath_fixup_addr=0x1f051000
   36 hint.pcib.0.bus.0.0.0.ath_fixup_size=4096
   37 
   38 # .. and now, telling each ath(4) NIC where to find the firmware
   39 # image.
   40 hint.ath.0.eeprom_firmware="pcib.0.bus.0.0.0.eeprom_firmware"
   41 
   42 # Inherited from AR724X_BASE.hints
   43 #hint.mx25l.0.at="spibus0"
   44 #hint.mx25l.0.cs=0
   45 # This board has two 16 MB flash devices on difference Chip Select pins
   46 hint.mx25l.1.at="spibus0"
   47 hint.mx25l.1.cs=1
   48 
   49 
   50 # Geom MAP
   51 
   52 # The WRZ-300HP has 2 16MB flash part - HOWEVER, the 64k caldata isn't
   53 # at the end of the flash. It's ~ 328KB into the flash image.
   54 
   55 # mtdparts=ar7240-nor0:
   56 #  256k(u-boot)
   57 #   64k(u-boot-env)
   58 #   64k@320k(ART)
   59 # 1152k@384k(uImage)
   60 # 6592k@1536k(rootfs)
   61 #   64k@8128k(properties)
   62 
   63 # Uboot lies like a lying liar.  OpenWRT does this:
   64 # [    0.570000] Concatenating MTD devices:
   65 # [    0.570000] (0): "spi0.0"
   66 # [    0.570000] (1): "spi0.1"
   67 # [    0.580000] into device "flash"
   68 # [    0.580000] Creating 7 MTD partitions on "flash":
   69 # [    0.590000] 0x000000000000-0x000000040000 : "u-boot"
   70 # [    0.600000] 0x000000040000-0x000000050000 : "u-boot-env"
   71 # [    0.600000] 0x000000050000-0x000000060000 : "art"
   72 # [    0.610000] 0x000000060000-0x000000160000 : "kernel"
   73 # [    0.620000] 0x000000160000-0x000001ff0000 : "rootfs"
   74 # [    0.620000] mtd: partition "rootfs" set to be root filesystem
   75 # [    0.630000] mtd: partition "rootfs_data" created automatically, ofs=330000, len=1CC0000 
   76 # [    0.640000] 0x000000330000-0x000001ff0000 : "rootfs_data"
   77 # [    0.650000] 0x000001ff0000-0x000002000000 : "user_property"
   78 # [    0.650000] 0x000000060000-0x000001ff0000 : "firmware"
   79 
   80 hint.map.0.at="flash/spi0"
   81 hint.map.0.start=0x00000000
   82 hint.map.0.end=  0x00040000
   83 hint.map.0.name="uboot"
   84 hint.map.0.readonly=1
   85 
   86 hint.map.1.at="flash/spi0"
   87 hint.map.1.start=0x00040000
   88 hint.map.1.end=  0x00050000       # 64k u-boot-env
   89 hint.map.1.name="u-boot-env"
   90 hint.map.1.readonly=1
   91 
   92 hint.map.2.at="flash/spi0"
   93 hint.map.2.start=0x00050000
   94 hint.map.2.end=  0x00060000       # 64k ART
   95 hint.map.2.name="ART"
   96 hint.map.2.readonly=1
   97 
   98 hint.map.3.at="flash/spi0"
   99 hint.map.3.start=0x00060000
  100 hint.map.3.end=  0x00160000
  101 hint.map.3.name="kernel"
  102 hint.map.3.readonly=1
  103 
  104 hint.map.4.at="flash/spi0"
  105 hint.map.4.start=0x00160000
  106 hint.map.4.end=  0x00FF0000
  107 hint.map.4.name="rootfs"
  108 hint.map.4.readonly=1
  109 
  110 #hint.map.5.at="flash/spi1"
  111 hint.map.5.at="flash/spi0"
  112 hint.map.5.start=0x00FF0000
  113 hint.map.5.end=  0x01000000
  114 hint.map.5.name="cfg"
  115 hint.map.5.readonly=0
  116 
  117 # GPIO specific configuration block
  118 
  119 #define GPIO_PIN_INPUT          0x0001  /* input direction */
  120 #define GPIO_PIN_OUTPUT         0x0002  /* output direction */
  121 #define GPIO_PIN_OPENDRAIN      0x0004  /* open-drain output */
  122 #define GPIO_PIN_PUSHPULL       0x0008  /* push-pull output */
  123 #define GPIO_PIN_TRISTATE       0x0010  /* output disabled */
  124 #define GPIO_PIN_PULLUP         0x0020  /* internal pull-up enabled */
  125 #define GPIO_PIN_PULLDOWN       0x0040  /* internal pull-down enabled */
  126 #define GPIO_PIN_INVIN          0x0080  /* invert input */
  127 #define GPIO_PIN_INVOUT         0x0100  /* invert output */
  128 #define GPIO_PIN_PULSATE        0x0200  /* pulsate in hardware */
  129   
  130 # Pin 1  - SCK
  131 # Pin 2  - SDA
  132 # Pin 3  - test 2
  133 # Pin 4  - test 3
  134 # Pin 5  - USB (LED Blue)
  135 # Pin 6  - test a
  136 # Pin 7  - Security (LED Orange)
  137 # Pin 8  - Router (LED Green)
  138 # Pin 9  - Movie Engine On (LED Blue)
  139 # Pin 10 - Movie Engine Off (LED Blue)
  140 # Pin 11 - test a
  141 # Pin 12 - test a
  142 # Pin 13 - test a
  143 # Pin 14 - USB Power (turn on by default)
  144 # Pin 15 - test a
  145 # Pin 16 - test a
  146 # Pin 17 - diag (LED red)
  147 
  148 # Don't flip on anything that isn't already enabled.
  149 # Force on USB power pin 14
  150 #hint.gpio.0.function_set=0x00000000
  151 #hint.gpio.0.function_clear=0x00000000
  152 
  153 # These are the GPIO LEDs and buttons which can be software controlled.
  154 hint.gpio.0.pinmask=0x000103D0
  155 
  156 hint.gpio.0.pinon=0x00000000
  157 
  158 hint.gpioiic.0.at="gpiobus0"
  159 hint.gpioiic.0.pins=0x0003
  160 hint.gpioiic.0.sda=0
  161 hint.gpioiic.0.scl=1
  162 
  163 # LEDs are configured separately and driven by the LED device
  164 # usb tested good
  165 hint.gpioled.0.at="gpiobus0"
  166 hint.gpioled.0.name="blue-usb"
  167 hint.gpioled.0.pins=0x00000010
  168 
  169 hint.gpioled.1.at="gpiobus0"
  170 hint.gpioled.1.name="orange-security"
  171 hint.gpioled.1.pins=0x00000040
  172 
  173 hint.gpioled.2.at="gpiobus0"
  174 hint.gpioled.2.name="green-router"
  175 hint.gpioled.2.pins=0x00000080
  176 
  177 hint.gpioled.3.at="gpiobus0"
  178 hint.gpioled.3.name="blue-movie-engine-on"
  179 hint.gpioled.3.pins=0x00000100
  180 
  181 hint.gpioled.4.at="gpiobus0"
  182 hint.gpioled.4.name="blue-movie-engine-off"
  183 hint.gpioled.4.pins=0x00000200
  184 
  185 hint.gpioled.5.at="gpiobus0"
  186 hint.gpioled.5.name="red-diag"
  187 hint.gpioled.5.pins=0x00010000

Cache object: 60235fe226ca927939a88aa642136e46


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]


This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.