1 #
2 # Specific board setup for the Buffalo Airstation WZR-300HP
3 #
4 # The WZR-300HP has the following hardware:
5 #
6 # + AR7242 CPU SoC
7 # + AR9280 5GHz 11n
8 # + AR8136 Gigabit switch
9 # + 2 m25ll128 based 16MB flash
10 # + 64MB RAM
11 # + uboot environment
12
13 # $FreeBSD: releng/10.0/sys/mips/conf/WZR-300HP 255659 2013-09-17 22:26:07Z sbruno $
14
15 include "AR724X_BASE"
16 ident "WZR-300HP"
17 hints "WZR-300HP.hints"
18
19 options AR71XX_REALMEM=64*1024*1024
20
21 options AR71XX_ENV_UBOOT
22
23 options BOOTVERBOSE
24 # Don't include the SCSI/CAM strings in the default build
25 options SCSI_NO_SENSE_STRINGS
26 options SCSI_NO_OP_STRINGS
27
28 # .. And no sysctl strings
29 options NO_SYSCTL_DESCR
30
31 # GEOM modules
32 device geom_map # to get access to the SPI flash partitions
33 device geom_uncompress # compressed in-memory filesystem hackery!
34
35 options ROOTDEVNAME=\"ufs:/dev/map/rootfs.uncompress\"
36
37 # options MD_ROOT
38 # options MD_ROOT_SIZE="6144"
39
40 options AR71XX_ATH_EEPROM # Fetch EEPROM/PCI config from flash
41 options ATH_EEPROM_FIRMWARE # Use EEPROM from flash
42 device firmware # Used by the above
43
44 # Options required for miiproxy and mdiobus
45 options ARGE_MDIO # Export an MDIO bus separate from arge
46 device miiproxy # MDIO bus <-> MII PHY rendezvous
47
48 device etherswitch
49 device arswitch
50
51 # Enable GPIO
52 device gpio
53 device gpioled
54
55 # hwpmc
56 device hwpmc_mips24k
57 device hwpmc
Cache object: 3e110748f8a0086f0d1dee2eb4c6c6d0
|