1 #
2 # Specific board setup for the Buffalo Airstation WZR-300HP
3 #
4 # The WZR-300HP has the following hardware:
5 #
6 # + AR7242 CPU SoC
7 # + AR9280 5GHz 11n
8 # + AR8136 Gigabit switch
9 # + 2 m25ll128 based 16MB flash
10 # + 64MB RAM
11 # + uboot environment
12
13 # $FreeBSD: releng/11.0/sys/mips/conf/WZR-300HP 295945 2016-02-24 00:39:36Z sobomax $
14
15 #NO_UNIVERSE
16
17 include "AR724X_BASE"
18 ident "WZR-300HP"
19 hints "WZR-300HP.hints"
20
21 options AR71XX_REALMEM=64*1024*1024
22
23 options AR71XX_ENV_UBOOT
24
25 options BOOTVERBOSE
26
27 # GEOM modules
28 device geom_map # to get access to the SPI flash partitions
29 device geom_uzip # compressed in-memory filesystem hackery!
30
31 options ROOTDEVNAME=\"ufs:/dev/map/rootfs.uzip\"
32
33 options AR71XX_ATH_EEPROM # Fetch EEPROM/PCI config from flash
34 options ATH_EEPROM_FIRMWARE # Use EEPROM from flash
35 device firmware # Used by the above
36
37 # Options required for miiproxy and mdiobus
38 options ARGE_MDIO # Export an MDIO bus separate from arge
39 device miiproxy # MDIO bus <-> MII PHY rendezvous
40
41 device etherswitch
42 device arswitch
43
44 # hwpmc
45 device hwpmc_mips24k
46 device hwpmc
47
48 # load these via modules, shrink kernel
49 nodevice if_bridge
50 nodevice bridgestp
51 nodevice random
Cache object: d6197820e4830db2b4b64573aa6f148b
|