1 #
2 # Specific board setup for the Buffalo Airstation WZR-300HP
3 #
4 # The WZR-300HP has the following hardware:
5 #
6 # + AR7242 CPU SoC
7 # + AR9280 5GHz 11n
8 # + AR8136 Gigabit switch
9 # + 2 m25ll128 based 16MB flash
10 # + 64MB RAM
11 # + uboot environment
12
13 # $FreeBSD$
14
15 #NO_UNIVERSE
16
17 include "std.AR724X"
18 ident "WZR-300HP"
19 hints "WZR-300HP.hints"
20
21 options AR71XX_REALMEM=64*1024*1024
22
23 options AR71XX_ENV_UBOOT
24
25 options BOOTVERBOSE
26
27 # GEOM modules
28 device geom_map # to get access to the SPI flash partitions
29 device xz
30 options GEOM_UZIP
31
32 options ROOTDEVNAME=\"ufs:/dev/map/rootfs.uzip\"
33
34 options AR71XX_ATH_EEPROM # Fetch EEPROM/PCI config from flash
35 options ATH_EEPROM_FIRMWARE # Use EEPROM from flash
36 device firmware # Used by the above
37
38 # Options required for miiproxy and mdiobus
39 options ARGE_MDIO # Export an MDIO bus separate from arge
40 device miiproxy # MDIO bus <-> MII PHY rendezvous
41
42 device etherswitch
43 device arswitch
44
45 # hwpmc
46 device hwpmc_mips24k
47 device hwpmc
48
49 # load these via modules, shrink kernel
50 nodevice if_bridge
51 nodevice bridgestp
52 options RANDOM_LOADABLE
Cache object: 300b4c3b29c1a3ae1db912e093e7aac5
|