The Design and Implementation of the FreeBSD Operating System, Second Edition
Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

FreeBSD/Linux Kernel Cross Reference
sys/mips/mips/machdep.c

Version: -  FREEBSD  -  FREEBSD-13-STABLE  -  FREEBSD-13-0  -  FREEBSD-12-STABLE  -  FREEBSD-12-0  -  FREEBSD-11-STABLE  -  FREEBSD-11-0  -  FREEBSD-10-STABLE  -  FREEBSD-10-0  -  FREEBSD-9-STABLE  -  FREEBSD-9-0  -  FREEBSD-8-STABLE  -  FREEBSD-8-0  -  FREEBSD-7-STABLE  -  FREEBSD-7-0  -  FREEBSD-6-STABLE  -  FREEBSD-6-0  -  FREEBSD-5-STABLE  -  FREEBSD-5-0  -  FREEBSD-4-STABLE  -  FREEBSD-3-STABLE  -  FREEBSD22  -  l41  -  OPENBSD  -  linux-2.6  -  MK84  -  PLAN9  -  xnu-8792 
SearchContext: -  none  -  3  -  10 

    1     /*  $OpenBSD: machdep.c,v 1.33 1998/09/15 10:58:54 pefo Exp $       */
    2 /* tracked to 1.38 */
    3 /*-
    4  * SPDX-License-Identifier: BSD-3-Clause
    5  *
    6  * Copyright (c) 1988 University of Utah.
    7  * Copyright (c) 1992, 1993
    8  *      The Regents of the University of California.  All rights reserved.
    9  *
   10  * This code is derived from software contributed to Berkeley by
   11  * the Systems Programming Group of the University of Utah Computer
   12  * Science Department, The Mach Operating System project at
   13  * Carnegie-Mellon University and Ralph Campbell.
   14  *
   15  * Redistribution and use in source and binary forms, with or without
   16  * modification, are permitted provided that the following conditions
   17  * are met:
   18  * 1. Redistributions of source code must retain the above copyright
   19  *    notice, this list of conditions and the following disclaimer.
   20  * 2. Redistributions in binary form must reproduce the above copyright
   21  *    notice, this list of conditions and the following disclaimer in the
   22  *    documentation and/or other materials provided with the distribution.
   23  * 3. Neither the name of the University nor the names of its contributors
   24  *    may be used to endorse or promote products derived from this software
   25  *    without specific prior written permission.
   26  *
   27  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
   28  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
   29  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
   30  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
   31  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
   32  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
   33  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
   34  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
   35  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
   36  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
   37  * SUCH DAMAGE.
   38  *
   39  *      from: @(#)machdep.c     8.3 (Berkeley) 1/12/94
   40  *      Id: machdep.c,v 1.33 1998/09/15 10:58:54 pefo Exp
   41  *      JNPR: machdep.c,v 1.11.2.3 2007/08/29 12:24:49
   42  */
   43 
   44 #include <sys/cdefs.h>
   45 __FBSDID("$FreeBSD$");
   46 
   47 #include "opt_ddb.h"
   48 #include "opt_md.h"
   49 
   50 #include <sys/param.h>
   51 #include <sys/proc.h>
   52 #include <sys/systm.h>
   53 #include <sys/buf.h>
   54 #include <sys/bus.h>
   55 #include <sys/conf.h>
   56 #include <sys/cpu.h>
   57 #include <sys/kernel.h>
   58 #include <sys/linker.h>
   59 #include <sys/malloc.h>
   60 #include <sys/mbuf.h>
   61 #include <sys/msgbuf.h>
   62 #include <sys/reboot.h>
   63 #include <sys/rwlock.h>
   64 #include <sys/sched.h>
   65 #include <sys/sysctl.h>
   66 #include <sys/sysproto.h>
   67 #include <sys/vmmeter.h>
   68 
   69 #include <vm/vm.h>
   70 #include <vm/vm_kern.h>
   71 #include <vm/vm_object.h>
   72 #include <vm/vm_page.h>
   73 #include <vm/vm_phys.h>
   74 #include <vm/pmap.h>
   75 #include <vm/vm_map.h>
   76 #include <vm/vm_pager.h>
   77 #include <vm/vm_extern.h>
   78 #include <sys/socket.h>
   79 
   80 #include <sys/user.h>
   81 #include <sys/interrupt.h>
   82 #include <sys/cons.h>
   83 #include <sys/syslog.h>
   84 #include <machine/asm.h>
   85 #include <machine/bootinfo.h>
   86 #include <machine/cache.h>
   87 #include <machine/clock.h>
   88 #include <machine/cpu.h>
   89 #include <machine/cpuregs.h>
   90 #include <machine/elf.h>
   91 #include <machine/hwfunc.h>
   92 #include <machine/intr_machdep.h>
   93 #include <machine/md_var.h>
   94 #include <machine/tlb.h>
   95 #ifdef DDB
   96 #include <sys/kdb.h>
   97 #include <ddb/ddb.h>
   98 #endif
   99 
  100 #include <sys/random.h>
  101 #include <net/if.h>
  102 
  103 #define BOOTINFO_DEBUG  0
  104 
  105 char machine[] = "mips";
  106 SYSCTL_STRING(_hw, HW_MACHINE, machine, CTLFLAG_RD, machine, 0, "Machine class");
  107 
  108 char cpu_model[80];
  109 SYSCTL_STRING(_hw, HW_MODEL, model, CTLFLAG_RD, cpu_model, 0, "Machine model");
  110 
  111 char cpu_board[80];
  112 SYSCTL_STRING(_hw, OID_AUTO, board, CTLFLAG_RD, cpu_board, 0, "Machine board");
  113 
  114 int cold = 1;
  115 long realmem = 0;
  116 long Maxmem = 0;
  117 int cpu_clock = MIPS_DEFAULT_HZ;
  118 SYSCTL_INT(_hw, OID_AUTO, clockrate, CTLFLAG_RD, 
  119     &cpu_clock, 0, "CPU instruction clock rate");
  120 int clocks_running = 0;
  121 
  122 vm_offset_t kstack0;
  123 
  124 /*
  125  * Each entry in the pcpu_space[] array is laid out in the following manner:
  126  * struct pcpu for cpu 'n'      pcpu_space[n]
  127  * boot stack for cpu 'n'       pcpu_space[n] + PAGE_SIZE * 2 - CALLFRAME_SIZ
  128  *
  129  * Note that the boot stack grows downwards and we assume that we never
  130  * use enough stack space to trample over the 'struct pcpu' that is at
  131  * the beginning of the array.
  132  *
  133  * The array is aligned on a (PAGE_SIZE * 2) boundary so that the 'struct pcpu'
  134  * is always in the even page frame of the wired TLB entry on SMP kernels.
  135  *
  136  * The array is in the .data section so that the stack does not get zeroed out
  137  * when the .bss section is zeroed.
  138  */
  139 char pcpu_space[MAXCPU][PAGE_SIZE * 2] \
  140         __aligned(PAGE_SIZE * 2) __section(".data");
  141 
  142 struct pcpu *pcpup = (struct pcpu *)pcpu_space;
  143 
  144 vm_paddr_t physmem_desc[PHYS_AVAIL_COUNT];
  145 
  146 #ifdef UNIMPLEMENTED
  147 struct platform platform;
  148 #endif
  149 
  150 static void cpu_startup(void *);
  151 SYSINIT(cpu, SI_SUB_CPU, SI_ORDER_FIRST, cpu_startup, NULL);
  152 
  153 struct kva_md_info kmi;
  154 
  155 int cpucfg;                     /* Value of processor config register */
  156 int num_tlbentries = 64;        /* Size of the CPU tlb */
  157 int cputype;
  158 
  159 extern char MipsException[], MipsExceptionEnd[];
  160 
  161 /* TLB miss handler address and end */
  162 extern char MipsTLBMiss[], MipsTLBMissEnd[];
  163 
  164 /* Cache error handler */
  165 extern char MipsCache[], MipsCacheEnd[];
  166 
  167 /* MIPS wait skip region */
  168 extern char MipsWaitStart[], MipsWaitEnd[];
  169 
  170 extern char edata[], end[];
  171 
  172 u_int32_t bootdev;
  173 struct bootinfo bootinfo;
  174 /*
  175  * First kseg0 address available for use. By default it's equal to &end.
  176  * But in some cases there might be additional data placed right after 
  177  * _end by loader or ELF trampoline.
  178  */
  179 vm_offset_t kernel_kseg0_end = (vm_offset_t)&end;
  180 
  181 static void
  182 cpu_startup(void *dummy)
  183 {
  184 
  185         if (boothowto & RB_VERBOSE)
  186                 bootverbose++;
  187 
  188         cpu_identify();
  189 
  190         printf("real memory  = %ju (%juK bytes)\n", ptoa((uintmax_t)realmem),
  191             ptoa((uintmax_t)realmem) / 1024);
  192 
  193         /*
  194          * Display any holes after the first chunk of extended memory.
  195          */
  196         if (bootverbose) {
  197                 int indx;
  198 
  199                 printf("Physical memory chunk(s):\n");
  200                 for (indx = 0; phys_avail[indx + 1] != 0; indx += 2) {
  201                         vm_paddr_t size1 = phys_avail[indx + 1] - phys_avail[indx];
  202 
  203                         printf("0x%08jx - 0x%08jx, %ju bytes (%ju pages)\n",
  204                             (uintmax_t)phys_avail[indx],
  205                             (uintmax_t)phys_avail[indx + 1] - 1,
  206                             (uintmax_t)size1,
  207                             (uintmax_t)size1 / PAGE_SIZE);
  208                 }
  209         }
  210 
  211         vm_ksubmap_init(&kmi);
  212 
  213         printf("avail memory = %ju (%juMB)\n", 
  214             ptoa((uintmax_t)vm_free_count()),
  215             ptoa((uintmax_t)vm_free_count()) / 1048576);
  216         cpu_init_interrupts();
  217 
  218         /*
  219          * Set up buffers, so they can be used to read disk labels.
  220          */
  221         bufinit();
  222         vm_pager_bufferinit();
  223 }
  224 
  225 /*
  226  * Shutdown the CPU as much as possible
  227  */
  228 void
  229 cpu_reset(void)
  230 {
  231 
  232         platform_reset();
  233 }
  234 
  235 /*
  236  * Flush the D-cache for non-DMA I/O so that the I-cache can
  237  * be made coherent later.
  238  */
  239 void
  240 cpu_flush_dcache(void *ptr, size_t len)
  241 {
  242         /* TBD */
  243 }
  244 
  245 /* Get current clock frequency for the given cpu id. */
  246 int
  247 cpu_est_clockrate(int cpu_id, uint64_t *rate)
  248 {
  249 
  250         return (ENXIO);
  251 }
  252 
  253 /*
  254  * Shutdown the CPU as much as possible
  255  */
  256 void
  257 cpu_halt(void)
  258 {
  259         for (;;)
  260                 ;
  261 }
  262 
  263 SYSCTL_STRUCT(_machdep, OID_AUTO, bootinfo, CTLFLAG_RD, &bootinfo,
  264     bootinfo, "Bootinfo struct: kernel filename, BIOS harddisk geometry, etc");
  265 
  266 /*
  267  * Initialize per cpu data structures, include curthread.
  268  */
  269 void
  270 mips_pcpu0_init()
  271 {
  272         /* Initialize pcpu info of cpu-zero */
  273         pcpu_init(PCPU_ADDR(0), 0, sizeof(struct pcpu));
  274         PCPU_SET(curthread, &thread0);
  275 }
  276 
  277 /*
  278  * Initialize mips and configure to run kernel
  279  */
  280 void
  281 mips_proc0_init(void)
  282 {
  283 #ifdef SMP
  284         if (platform_processor_id() != 0)
  285                 panic("BSP must be processor number 0");
  286 #endif
  287         proc_linkup0(&proc0, &thread0);
  288 
  289         KASSERT((kstack0 & PAGE_MASK) == 0,
  290                 ("kstack0 is not aligned on a page boundary: 0x%0lx",
  291                 (long)kstack0));
  292         thread0.td_kstack = kstack0;
  293         thread0.td_kstack_pages = KSTACK_PAGES;
  294         /* 
  295          * Do not use cpu_thread_alloc to initialize these fields 
  296          * thread0 is the only thread that has kstack located in KSEG0 
  297          * while cpu_thread_alloc handles kstack allocated in KSEG2.
  298          */
  299         thread0.td_pcb = (struct pcb *)(thread0.td_kstack +
  300             thread0.td_kstack_pages * PAGE_SIZE) - 1;
  301         thread0.td_frame = &thread0.td_pcb->pcb_regs;
  302 
  303         /* Steal memory for the dynamic per-cpu area. */
  304         dpcpu_init((void *)pmap_steal_memory(DPCPU_SIZE), 0);
  305 
  306         PCPU_SET(curpcb, thread0.td_pcb);
  307         /*
  308          * There is no need to initialize md_upte array for thread0 as it's
  309          * located in .bss section and should be explicitly zeroed during 
  310          * kernel initialization.
  311          */
  312 }
  313 
  314 void
  315 cpu_initclocks(void)
  316 {
  317 
  318         platform_initclocks();
  319         cpu_initclocks_bsp();
  320 }
  321 
  322 /*
  323  * Initialize the hardware exception vectors, and the jump table used to
  324  * call locore cache and TLB management functions, based on the kind
  325  * of CPU the kernel is running on.
  326  */
  327 void
  328 mips_vector_init(void)
  329 {
  330         /*
  331          * Make sure that the Wait region logic is not been 
  332          * changed
  333          */
  334         if (MipsWaitEnd - MipsWaitStart != 16)
  335                 panic("startup: MIPS wait region not correct");
  336         /*
  337          * Copy down exception vector code.
  338          */
  339         if (MipsTLBMissEnd - MipsTLBMiss > 0x80)
  340                 panic("startup: UTLB code too large");
  341 
  342         if (MipsCacheEnd - MipsCache > 0x80)
  343                 panic("startup: Cache error code too large");
  344 
  345         bcopy(MipsTLBMiss, (void *)MIPS_UTLB_MISS_EXC_VEC,
  346               MipsTLBMissEnd - MipsTLBMiss);
  347 
  348         /*
  349          * XXXRW: Why don't we install the XTLB handler for all 64-bit
  350          * architectures?
  351          */
  352 #if defined(__mips_n64) || defined(CPU_RMI) || defined(CPU_NLM) || defined(CPU_BERI)
  353 /* Fake, but sufficient, for the 32-bit with 64-bit hardware addresses  */
  354         bcopy(MipsTLBMiss, (void *)MIPS_XTLB_MISS_EXC_VEC,
  355               MipsTLBMissEnd - MipsTLBMiss);
  356 #endif
  357 
  358         bcopy(MipsException, (void *)MIPS_GEN_EXC_VEC,
  359               MipsExceptionEnd - MipsException);
  360 
  361         bcopy(MipsCache, (void *)MIPS_CACHE_ERR_EXC_VEC,
  362               MipsCacheEnd - MipsCache);
  363 
  364         /*
  365          * Clear out the I and D caches.
  366          */
  367         mips_icache_sync_all();
  368         mips_dcache_wbinv_all();
  369 
  370         /* 
  371          * Mask all interrupts. Each interrupt will be enabled
  372          * when handler is installed for it
  373          */
  374         set_intr_mask(0);
  375 
  376         /* Clear BEV in SR so we start handling our own exceptions */
  377         mips_wr_status(mips_rd_status() & ~MIPS_SR_BEV);
  378 }
  379 
  380 /*
  381  * Fix kernel_kseg0_end address in case trampoline placed debug sympols 
  382  * data there
  383  */
  384 void
  385 mips_postboot_fixup(void)
  386 {
  387         /*
  388          * We store u_long sized objects into the reload area, so the array
  389          * must be so aligned. The standard allows any alignment for char data.
  390          */
  391         _Alignas(_Alignof(u_long)) static char fake_preload[256];
  392         caddr_t preload_ptr = (caddr_t)&fake_preload[0];
  393         size_t size = 0;
  394 
  395 #define PRELOAD_PUSH_VALUE(type, value) do {            \
  396         *(type *)(preload_ptr + size) = (value);        \
  397         size += sizeof(type);                           \
  398 } while (0);
  399 
  400         /*
  401          * Provide kernel module file information
  402          */
  403         PRELOAD_PUSH_VALUE(uint32_t, MODINFO_NAME);
  404         PRELOAD_PUSH_VALUE(uint32_t, strlen("kernel") + 1);
  405         strcpy((char*)(preload_ptr + size), "kernel");
  406         size += strlen("kernel") + 1;
  407         size = roundup(size, sizeof(u_long));
  408 
  409         PRELOAD_PUSH_VALUE(uint32_t, MODINFO_TYPE);
  410         PRELOAD_PUSH_VALUE(uint32_t, strlen("elf kernel") + 1);
  411         strcpy((char*)(preload_ptr + size), "elf kernel");
  412         size += strlen("elf kernel") + 1;
  413         size = roundup(size, sizeof(u_long));
  414 
  415         PRELOAD_PUSH_VALUE(uint32_t, MODINFO_ADDR);
  416         PRELOAD_PUSH_VALUE(uint32_t, sizeof(vm_offset_t));
  417         PRELOAD_PUSH_VALUE(vm_offset_t, KERNLOADADDR);
  418         size = roundup(size, sizeof(u_long));
  419 
  420         PRELOAD_PUSH_VALUE(uint32_t, MODINFO_SIZE);
  421         PRELOAD_PUSH_VALUE(uint32_t, sizeof(size_t));
  422         PRELOAD_PUSH_VALUE(size_t, (size_t)&end - KERNLOADADDR);
  423         size = roundup(size, sizeof(u_long));
  424 
  425         /* End marker */
  426         PRELOAD_PUSH_VALUE(uint32_t, 0);
  427         PRELOAD_PUSH_VALUE(uint32_t, 0);
  428 
  429 #undef  PRELOAD_PUSH_VALUE
  430 
  431         KASSERT((size < sizeof(fake_preload)),
  432                 ("fake preload size is more thenallocated"));
  433 
  434         preload_metadata = (void *)fake_preload;
  435 
  436 #ifdef DDB
  437         Elf_Size *trampoline_data = (Elf_Size*)kernel_kseg0_end;
  438         Elf_Size symtabsize = 0;
  439         vm_offset_t ksym_start;
  440         vm_offset_t ksym_end;
  441 
  442         if (trampoline_data[0] == SYMTAB_MAGIC) {
  443                 symtabsize = trampoline_data[1];
  444                 kernel_kseg0_end += 2 * sizeof(Elf_Size);
  445                 /* start of .symtab */
  446                 ksym_start = kernel_kseg0_end;
  447                 kernel_kseg0_end += symtabsize;
  448                 /* end of .strtab */
  449                 ksym_end = kernel_kseg0_end;
  450                 db_fetch_ksymtab(ksym_start, ksym_end, 0);
  451         }
  452 #endif
  453 }
  454 
  455 #ifdef SMP
  456 void
  457 mips_pcpu_tlb_init(struct pcpu *pcpu)
  458 {
  459         vm_paddr_t pa;
  460         pt_entry_t pte;
  461 
  462         /*
  463          * Map the pcpu structure at the virtual address 'pcpup'.
  464          * We use a wired tlb index to do this one-time mapping.
  465          */
  466         pa = vtophys(pcpu);
  467         pte = PTE_D | PTE_V | PTE_G | PTE_C_CACHE;
  468         tlb_insert_wired(PCPU_TLB_ENTRY, (vm_offset_t)pcpup,
  469                          TLBLO_PA_TO_PFN(pa) | pte,
  470                          TLBLO_PA_TO_PFN(pa + PAGE_SIZE) | pte);
  471 }
  472 #endif
  473 
  474 /*
  475  * Initialise a struct pcpu.
  476  */
  477 void
  478 cpu_pcpu_init(struct pcpu *pcpu, int cpuid, size_t size)
  479 {
  480 
  481         pcpu->pc_next_asid = 1;
  482         pcpu->pc_asid_generation = 1;
  483         pcpu->pc_self = pcpu;
  484 #ifdef SMP
  485         if ((vm_offset_t)pcpup >= VM_MIN_KERNEL_ADDRESS &&
  486             (vm_offset_t)pcpup <= VM_MAX_KERNEL_ADDRESS) {
  487                 mips_pcpu_tlb_init(pcpu);
  488         }
  489 #endif
  490 }
  491 
  492 int
  493 fill_dbregs(struct thread *td, struct dbreg *dbregs)
  494 {
  495 
  496         /* No debug registers on mips */
  497         return (ENOSYS);
  498 }
  499 
  500 int
  501 set_dbregs(struct thread *td, struct dbreg *dbregs)
  502 {
  503 
  504         /* No debug registers on mips */
  505         return (ENOSYS);
  506 }
  507 
  508 void
  509 spinlock_enter(void)
  510 {
  511         struct thread *td;
  512         register_t intr;
  513 
  514         td = curthread;
  515         if (td->td_md.md_spinlock_count == 0) {
  516                 intr = intr_disable();
  517                 td->td_md.md_spinlock_count = 1;
  518                 td->td_md.md_saved_intr = intr;
  519                 critical_enter();
  520         } else
  521                 td->td_md.md_spinlock_count++;
  522 }
  523 
  524 void
  525 spinlock_exit(void)
  526 {
  527         struct thread *td;
  528         register_t intr;
  529 
  530         td = curthread;
  531         intr = td->td_md.md_saved_intr;
  532         td->td_md.md_spinlock_count--;
  533         if (td->td_md.md_spinlock_count == 0) {
  534                 critical_exit();
  535                 intr_restore(intr);
  536         }
  537 }
  538 
  539 /*
  540  * call platform specific code to halt (until next interrupt) for the idle loop
  541  */
  542 void
  543 cpu_idle(int busy)
  544 {
  545         KASSERT((mips_rd_status() & MIPS_SR_INT_IE) != 0,
  546                 ("interrupts disabled in idle process."));
  547         KASSERT((mips_rd_status() & MIPS_INT_MASK) != 0,
  548                 ("all interrupts masked in idle process."));
  549 
  550         if (!busy) {
  551                 critical_enter();
  552                 cpu_idleclock();
  553         }
  554         mips_wait();
  555         if (!busy) {
  556                 cpu_activeclock();
  557                 critical_exit();
  558         }
  559 }
  560 
  561 int
  562 cpu_idle_wakeup(int cpu)
  563 {
  564 
  565         return (0);
  566 }
  567 
  568 int
  569 is_cacheable_mem(vm_paddr_t pa)
  570 {
  571         int i;
  572 
  573         for (i = 0; physmem_desc[i + 1] != 0; i += 2) {
  574                 if (pa >= physmem_desc[i] && pa < physmem_desc[i + 1])
  575                         return (1);
  576         }
  577 
  578         return (0);
  579 }

Cache object: b4e2baf266f2db65f5ad07f8e233bec6


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]


This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.