FreeBSD/Linux Kernel Cross Reference
sys/modules/twa/Makefile

     # $FreeBSD: src/sys/modules/twa/Makefile,v 1.3.2.2 2005/12/07 18:20:38 vkashyap Exp $
     #
     # Copyright (c) 2004 Applied Micro Circuits Corporation.
     # All rights reserved.
     #
     # Redistribution and use in source and binary forms, with or without
     # modification, are permitted provided that the following conditions
     # are met:
     # 1. Redistributions of source code must retain the above copyright
    #    notice, this list of conditions and the following disclaimer.
    # 2. Redistributions in binary form must reproduce the above copyright
    #    notice, this list of conditions and the following disclaimer in the
    #    documentation and/or other materials provided with the distribution.
    #
    # THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
    # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
    # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
    # ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
    # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
    # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
    # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
    # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
    # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
    # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
    # SUCH DAMAGE.
    #
    
    #
    # 3ware driver for 9000 series storage controllers.
    #
    # Author: Vinod Kashyap
    #
    
    
    
    #
    # In the line following this comment, a value of 0 on the right hand
    # side will not cause firmware to be bundled.  Change this value to 1
    # to bundle the firmware with the driver, which may be flashed onto
    # the controller, if the firmware on the controller is older than the
    # one bundled, and needs to be upgraded.  The size of the driver will
    # increase significantly (to over 500kB) if this option is selected.
    # Typically, the firmware image bundled (in tw_cl_fwimg.c) corresponds
    # to the latest controller architecture as of the date of the release.
    # If the firmware for an earlier controller architecture needs to be
    # flashed, the (older) driver with the appropriate firmware image
    # bundled can be downloaded from the 3ware website, used to flash the
    # firmware, and then the newer driver can be switched to.  Alternatively,
    # the appropriate firmware image (tw_cl_fwimg.c) from the older driver can
    # be used to re-build the newer driver.  In this case, the branch
    # (TWA_CURRENT_FW_BRANCH_*) and build (TWA_CURRENT_FW_BUILD_*) numbers for
    # the bundled firmware need to be appropriately updated in tw_cl_fwif.h
    # before building the driver.
    #
    TWA_FLASH_FIRMWARE?=0
    
    KMOD = twa
    .PATH: ${.CURDIR}/../../dev/${KMOD}
    SRCS=  tw_osl_freebsd.c tw_osl_cam.c \
          tw_cl_init.c tw_cl_io.c tw_cl_intr.c tw_cl_misc.c \
          bus_if.h device_if.h pci_if.h opt_scsi.h opt_cam.h opt_twa.h
    
    # Uncomment the following line to turn on Enclosure Services support.
    #CFLAGS+= -DTWA_ENCLOSURE_SUPPORT
    
    #CFLAGS+= -DTWA_DEBUG=0
    CFLAGS+= -I${.CURDIR}/../../dev/${KMOD}
    
    .if $(TWA_FLASH_FIRMWARE) != 0
    CFLAGS+= -DTWA_FLASH_FIRMWARE
    SRCS+= tw_cl_fwimg.c
    .endif
    
    .include <bsd.kmod.mk>
    

Cache object: 334798277e374743c90e5e9a568edc40