The Design and Implementation of the FreeBSD Operating System, Second Edition
Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

FreeBSD/Linux Kernel Cross Reference
sys/net80211/ieee80211_ioctl.h

Version: -  FREEBSD  -  FREEBSD-13-STABLE  -  FREEBSD-13-0  -  FREEBSD-12-STABLE  -  FREEBSD-12-0  -  FREEBSD-11-STABLE  -  FREEBSD-11-0  -  FREEBSD-10-STABLE  -  FREEBSD-10-0  -  FREEBSD-9-STABLE  -  FREEBSD-9-0  -  FREEBSD-8-STABLE  -  FREEBSD-8-0  -  FREEBSD-7-STABLE  -  FREEBSD-7-0  -  FREEBSD-6-STABLE  -  FREEBSD-6-0  -  FREEBSD-5-STABLE  -  FREEBSD-5-0  -  FREEBSD-4-STABLE  -  FREEBSD-3-STABLE  -  FREEBSD22  -  l41  -  OPENBSD  -  linux-2.6  -  MK84  -  PLAN9  -  xnu-8792 
SearchContext: -  none  -  3  -  10 

    1 /*-
    2  * Copyright (c) 2001 Atsushi Onoe
    3  * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
    4  * All rights reserved.
    5  *
    6  * Redistribution and use in source and binary forms, with or without
    7  * modification, are permitted provided that the following conditions
    8  * are met:
    9  * 1. Redistributions of source code must retain the above copyright
   10  *    notice, this list of conditions and the following disclaimer.
   11  * 2. Redistributions in binary form must reproduce the above copyright
   12  *    notice, this list of conditions and the following disclaimer in the
   13  *    documentation and/or other materials provided with the distribution.
   14  *
   15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
   16  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
   17  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
   18  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
   19  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
   20  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
   21  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
   22  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
   23  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
   24  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   25  *
   26  * $FreeBSD: releng/8.2/sys/net80211/ieee80211_ioctl.h 215626 2010-11-21 12:32:35Z bschmidt $
   27  */
   28 #ifndef _NET80211_IEEE80211_IOCTL_H_
   29 #define _NET80211_IEEE80211_IOCTL_H_
   30 
   31 /*
   32  * IEEE 802.11 ioctls.
   33  */
   34 #include <net80211/_ieee80211.h>
   35 #include <net80211/ieee80211.h>
   36 #include <net80211/ieee80211_crypto.h>
   37 
   38 /*
   39  * Per/node (station) statistics.
   40  */
   41 struct ieee80211_nodestats {
   42         uint32_t        ns_rx_data;             /* rx data frames */
   43         uint32_t        ns_rx_mgmt;             /* rx management frames */
   44         uint32_t        ns_rx_ctrl;             /* rx control frames */
   45         uint32_t        ns_rx_ucast;            /* rx unicast frames */
   46         uint32_t        ns_rx_mcast;            /* rx multi/broadcast frames */
   47         uint64_t        ns_rx_bytes;            /* rx data count (bytes) */
   48         uint64_t        ns_rx_beacons;          /* rx beacon frames */
   49         uint32_t        ns_rx_proberesp;        /* rx probe response frames */
   50 
   51         uint32_t        ns_rx_dup;              /* rx discard 'cuz dup */
   52         uint32_t        ns_rx_noprivacy;        /* rx w/ wep but privacy off */
   53         uint32_t        ns_rx_wepfail;          /* rx wep processing failed */
   54         uint32_t        ns_rx_demicfail;        /* rx demic failed */
   55         uint32_t        ns_rx_decap;            /* rx decapsulation failed */
   56         uint32_t        ns_rx_defrag;           /* rx defragmentation failed */
   57         uint32_t        ns_rx_disassoc;         /* rx disassociation */
   58         uint32_t        ns_rx_deauth;           /* rx deauthentication */
   59         uint32_t        ns_rx_action;           /* rx action */
   60         uint32_t        ns_rx_decryptcrc;       /* rx decrypt failed on crc */
   61         uint32_t        ns_rx_unauth;           /* rx on unauthorized port */
   62         uint32_t        ns_rx_unencrypted;      /* rx unecrypted w/ privacy */
   63         uint32_t        ns_rx_drop;             /* rx discard other reason */
   64 
   65         uint32_t        ns_tx_data;             /* tx data frames */
   66         uint32_t        ns_tx_mgmt;             /* tx management frames */
   67         uint32_t        ns_tx_ctrl;             /* tx control frames */
   68         uint32_t        ns_tx_ucast;            /* tx unicast frames */
   69         uint32_t        ns_tx_mcast;            /* tx multi/broadcast frames */
   70         uint64_t        ns_tx_bytes;            /* tx data count (bytes) */
   71         uint32_t        ns_tx_probereq;         /* tx probe request frames */
   72 
   73         uint32_t        ns_tx_novlantag;        /* tx discard 'cuz no tag */
   74         uint32_t        ns_tx_vlanmismatch;     /* tx discard 'cuz bad tag */
   75 
   76         uint32_t        ns_ps_discard;          /* ps discard 'cuz of age */
   77 
   78         /* MIB-related state */
   79         uint32_t        ns_tx_assoc;            /* [re]associations */
   80         uint32_t        ns_tx_assoc_fail;       /* [re]association failures */
   81         uint32_t        ns_tx_auth;             /* [re]authentications */
   82         uint32_t        ns_tx_auth_fail;        /* [re]authentication failures*/
   83         uint32_t        ns_tx_deauth;           /* deauthentications */
   84         uint32_t        ns_tx_deauth_code;      /* last deauth reason */
   85         uint32_t        ns_tx_disassoc;         /* disassociations */
   86         uint32_t        ns_tx_disassoc_code;    /* last disassociation reason */
   87         uint32_t        ns_spare[8];
   88 };
   89 
   90 /*
   91  * Summary statistics.
   92  */
   93 struct ieee80211_stats {
   94         uint32_t        is_rx_badversion;       /* rx frame with bad version */
   95         uint32_t        is_rx_tooshort;         /* rx frame too short */
   96         uint32_t        is_rx_wrongbss;         /* rx from wrong bssid */
   97         uint32_t        is_rx_dup;              /* rx discard 'cuz dup */
   98         uint32_t        is_rx_wrongdir;         /* rx w/ wrong direction */
   99         uint32_t        is_rx_mcastecho;        /* rx discard 'cuz mcast echo */
  100         uint32_t        is_rx_notassoc;         /* rx discard 'cuz sta !assoc */
  101         uint32_t        is_rx_noprivacy;        /* rx w/ wep but privacy off */
  102         uint32_t        is_rx_unencrypted;      /* rx w/o wep and privacy on */
  103         uint32_t        is_rx_wepfail;          /* rx wep processing failed */
  104         uint32_t        is_rx_decap;            /* rx decapsulation failed */
  105         uint32_t        is_rx_mgtdiscard;       /* rx discard mgt frames */
  106         uint32_t        is_rx_ctl;              /* rx ctrl frames */
  107         uint32_t        is_rx_beacon;           /* rx beacon frames */
  108         uint32_t        is_rx_rstoobig;         /* rx rate set truncated */
  109         uint32_t        is_rx_elem_missing;     /* rx required element missing*/
  110         uint32_t        is_rx_elem_toobig;      /* rx element too big */
  111         uint32_t        is_rx_elem_toosmall;    /* rx element too small */
  112         uint32_t        is_rx_elem_unknown;     /* rx element unknown */
  113         uint32_t        is_rx_badchan;          /* rx frame w/ invalid chan */
  114         uint32_t        is_rx_chanmismatch;     /* rx frame chan mismatch */
  115         uint32_t        is_rx_nodealloc;        /* rx frame dropped */
  116         uint32_t        is_rx_ssidmismatch;     /* rx frame ssid mismatch  */
  117         uint32_t        is_rx_auth_unsupported; /* rx w/ unsupported auth alg */
  118         uint32_t        is_rx_auth_fail;        /* rx sta auth failure */
  119         uint32_t        is_rx_auth_countermeasures;/* rx auth discard 'cuz CM */
  120         uint32_t        is_rx_assoc_bss;        /* rx assoc from wrong bssid */
  121         uint32_t        is_rx_assoc_notauth;    /* rx assoc w/o auth */
  122         uint32_t        is_rx_assoc_capmismatch;/* rx assoc w/ cap mismatch */
  123         uint32_t        is_rx_assoc_norate;     /* rx assoc w/ no rate match */
  124         uint32_t        is_rx_assoc_badwpaie;   /* rx assoc w/ bad WPA IE */
  125         uint32_t        is_rx_deauth;           /* rx deauthentication */
  126         uint32_t        is_rx_disassoc;         /* rx disassociation */
  127         uint32_t        is_rx_badsubtype;       /* rx frame w/ unknown subtype*/
  128         uint32_t        is_rx_nobuf;            /* rx failed for lack of buf */
  129         uint32_t        is_rx_decryptcrc;       /* rx decrypt failed on crc */
  130         uint32_t        is_rx_ahdemo_mgt;       /* rx discard ahdemo mgt frame*/
  131         uint32_t        is_rx_bad_auth;         /* rx bad auth request */
  132         uint32_t        is_rx_unauth;           /* rx on unauthorized port */
  133         uint32_t        is_rx_badkeyid;         /* rx w/ incorrect keyid */
  134         uint32_t        is_rx_ccmpreplay;       /* rx seq# violation (CCMP) */
  135         uint32_t        is_rx_ccmpformat;       /* rx format bad (CCMP) */
  136         uint32_t        is_rx_ccmpmic;          /* rx MIC check failed (CCMP) */
  137         uint32_t        is_rx_tkipreplay;       /* rx seq# violation (TKIP) */
  138         uint32_t        is_rx_tkipformat;       /* rx format bad (TKIP) */
  139         uint32_t        is_rx_tkipmic;          /* rx MIC check failed (TKIP) */
  140         uint32_t        is_rx_tkipicv;          /* rx ICV check failed (TKIP) */
  141         uint32_t        is_rx_badcipher;        /* rx failed 'cuz key type */
  142         uint32_t        is_rx_nocipherctx;      /* rx failed 'cuz key !setup */
  143         uint32_t        is_rx_acl;              /* rx discard 'cuz acl policy */
  144         uint32_t        is_tx_nobuf;            /* tx failed for lack of buf */
  145         uint32_t        is_tx_nonode;           /* tx failed for no node */
  146         uint32_t        is_tx_unknownmgt;       /* tx of unknown mgt frame */
  147         uint32_t        is_tx_badcipher;        /* tx failed 'cuz key type */
  148         uint32_t        is_tx_nodefkey;         /* tx failed 'cuz no defkey */
  149         uint32_t        is_tx_noheadroom;       /* tx failed 'cuz no space */
  150         uint32_t        is_tx_fragframes;       /* tx frames fragmented */
  151         uint32_t        is_tx_frags;            /* tx fragments created */
  152         uint32_t        is_scan_active;         /* active scans started */
  153         uint32_t        is_scan_passive;        /* passive scans started */
  154         uint32_t        is_node_timeout;        /* nodes timed out inactivity */
  155         uint32_t        is_crypto_nomem;        /* no memory for crypto ctx */
  156         uint32_t        is_crypto_tkip;         /* tkip crypto done in s/w */
  157         uint32_t        is_crypto_tkipenmic;    /* tkip en-MIC done in s/w */
  158         uint32_t        is_crypto_tkipdemic;    /* tkip de-MIC done in s/w */
  159         uint32_t        is_crypto_tkipcm;       /* tkip counter measures */
  160         uint32_t        is_crypto_ccmp;         /* ccmp crypto done in s/w */
  161         uint32_t        is_crypto_wep;          /* wep crypto done in s/w */
  162         uint32_t        is_crypto_setkey_cipher;/* cipher rejected key */
  163         uint32_t        is_crypto_setkey_nokey; /* no key index for setkey */
  164         uint32_t        is_crypto_delkey;       /* driver key delete failed */
  165         uint32_t        is_crypto_badcipher;    /* unknown cipher */
  166         uint32_t        is_crypto_nocipher;     /* cipher not available */
  167         uint32_t        is_crypto_attachfail;   /* cipher attach failed */
  168         uint32_t        is_crypto_swfallback;   /* cipher fallback to s/w */
  169         uint32_t        is_crypto_keyfail;      /* driver key alloc failed */
  170         uint32_t        is_crypto_enmicfail;    /* en-MIC failed */
  171         uint32_t        is_ibss_capmismatch;    /* merge failed-cap mismatch */
  172         uint32_t        is_ibss_norate;         /* merge failed-rate mismatch */
  173         uint32_t        is_ps_unassoc;          /* ps-poll for unassoc. sta */
  174         uint32_t        is_ps_badaid;           /* ps-poll w/ incorrect aid */
  175         uint32_t        is_ps_qempty;           /* ps-poll w/ nothing to send */
  176         uint32_t        is_ff_badhdr;           /* fast frame rx'd w/ bad hdr */
  177         uint32_t        is_ff_tooshort;         /* fast frame rx decap error */
  178         uint32_t        is_ff_split;            /* fast frame rx split error */
  179         uint32_t        is_ff_decap;            /* fast frames decap'd */
  180         uint32_t        is_ff_encap;            /* fast frames encap'd for tx */
  181         uint32_t        is_rx_badbintval;       /* rx frame w/ bogus bintval */
  182         uint32_t        is_rx_demicfail;        /* rx demic failed */
  183         uint32_t        is_rx_defrag;           /* rx defragmentation failed */
  184         uint32_t        is_rx_mgmt;             /* rx management frames */
  185         uint32_t        is_rx_action;           /* rx action mgt frames */
  186         uint32_t        is_amsdu_tooshort;      /* A-MSDU rx decap error */
  187         uint32_t        is_amsdu_split;         /* A-MSDU rx split error */
  188         uint32_t        is_amsdu_decap;         /* A-MSDU decap'd */
  189         uint32_t        is_amsdu_encap;         /* A-MSDU encap'd for tx */
  190         uint32_t        is_ampdu_bar_bad;       /* A-MPDU BAR out of window */
  191         uint32_t        is_ampdu_bar_oow;       /* A-MPDU BAR before ADDBA */
  192         uint32_t        is_ampdu_bar_move;      /* A-MPDU BAR moved window */
  193         uint32_t        is_ampdu_bar_rx;        /* A-MPDU BAR frames handled */
  194         uint32_t        is_ampdu_rx_flush;      /* A-MPDU frames flushed */
  195         uint32_t        is_ampdu_rx_oor;        /* A-MPDU frames out-of-order */
  196         uint32_t        is_ampdu_rx_copy;       /* A-MPDU frames copied down */
  197         uint32_t        is_ampdu_rx_drop;       /* A-MPDU frames dropped */
  198         uint32_t        is_tx_badstate;         /* tx discard state != RUN */
  199         uint32_t        is_tx_notassoc;         /* tx failed, sta not assoc */
  200         uint32_t        is_tx_classify;         /* tx classification failed */
  201         uint32_t        is_dwds_mcast;          /* discard mcast over dwds */
  202         uint32_t        is_dwds_qdrop;          /* dwds pending frame q full */
  203         uint32_t        is_ht_assoc_nohtcap;    /* non-HT sta rejected */
  204         uint32_t        is_ht_assoc_downgrade;  /* HT sta forced to legacy */
  205         uint32_t        is_ht_assoc_norate;     /* HT assoc w/ rate mismatch */
  206         uint32_t        is_ampdu_rx_age;        /* A-MPDU sent up 'cuz of age */
  207         uint32_t        is_ampdu_rx_move;       /* A-MPDU MSDU moved window */
  208         uint32_t        is_addba_reject;        /* ADDBA reject 'cuz disabled */
  209         uint32_t        is_addba_norequest;     /* ADDBA response w/o ADDBA */
  210         uint32_t        is_addba_badtoken;      /* ADDBA response w/ wrong
  211                                                    dialogtoken */
  212         uint32_t        is_addba_badpolicy;     /* ADDBA resp w/ wrong policy */
  213         uint32_t        is_ampdu_stop;          /* A-MPDU stream stopped */
  214         uint32_t        is_ampdu_stop_failed;   /* A-MPDU stream not running */
  215         uint32_t        is_ampdu_rx_reorder;    /* A-MPDU held for rx reorder */
  216         uint32_t        is_scan_bg;             /* background scans started */
  217         uint8_t         is_rx_deauth_code;      /* last rx'd deauth reason */
  218         uint8_t         is_rx_disassoc_code;    /* last rx'd disassoc reason */
  219         uint8_t         is_rx_authfail_code;    /* last rx'd auth fail reason */
  220         uint32_t        is_beacon_miss;         /* beacon miss notification */
  221         uint32_t        is_rx_badstate;         /* rx discard state != RUN */
  222         uint32_t        is_ff_flush;            /* ff's flush'd from stageq */
  223         uint32_t        is_tx_ctl;              /* tx ctrl frames */
  224         uint32_t        is_ampdu_rexmt;         /* A-MPDU frames rexmt ok */
  225         uint32_t        is_ampdu_rexmt_fail;    /* A-MPDU frames rexmt fail */
  226 
  227         uint32_t        is_mesh_wrongmesh;      /* dropped 'cuz not mesh sta*/
  228         uint32_t        is_mesh_nolink;         /* dropped 'cuz link not estab*/
  229         uint32_t        is_mesh_fwd_ttl;        /* mesh not fwd'd 'cuz ttl 0 */
  230         uint32_t        is_mesh_fwd_nobuf;      /* mesh not fwd'd 'cuz no mbuf*/
  231         uint32_t        is_mesh_fwd_tooshort;   /* mesh not fwd'd 'cuz no hdr */
  232         uint32_t        is_mesh_fwd_disabled;   /* mesh not fwd'd 'cuz disabled */
  233         uint32_t        is_mesh_fwd_nopath;     /* mesh not fwd'd 'cuz path unknown */
  234 
  235         uint32_t        is_hwmp_wrongseq;       /* wrong hwmp seq no. */
  236         uint32_t        is_hwmp_rootreqs;       /* root PREQs sent */
  237         uint32_t        is_hwmp_rootrann;       /* root RANNs sent */
  238 
  239         uint32_t        is_mesh_badae;          /* dropped 'cuz invalid AE */
  240         uint32_t        is_mesh_rtaddfailed;    /* route add failed */
  241         uint32_t        is_mesh_notproxy;       /* dropped 'cuz not proxying */
  242         uint32_t        is_rx_badalign;         /* dropped 'cuz misaligned */
  243         uint32_t        is_hwmp_proxy;          /* PREP for proxy route */
  244         
  245         uint32_t        is_spare[11];
  246 };
  247 
  248 /*
  249  * Max size of optional information elements.  We artificially
  250  * constrain this; it's limited only by the max frame size (and
  251  * the max parameter size of the wireless extensions).
  252  */
  253 #define IEEE80211_MAX_OPT_IE    256
  254 
  255 /*
  256  * WPA/RSN get/set key request.  Specify the key/cipher
  257  * type and whether the key is to be used for sending and/or
  258  * receiving.  The key index should be set only when working
  259  * with global keys (use IEEE80211_KEYIX_NONE for ``no index'').
  260  * Otherwise a unicast/pairwise key is specified by the bssid
  261  * (on a station) or mac address (on an ap).  They key length
  262  * must include any MIC key data; otherwise it should be no
  263  * more than IEEE80211_KEYBUF_SIZE.
  264  */
  265 struct ieee80211req_key {
  266         uint8_t         ik_type;        /* key/cipher type */
  267         uint8_t         ik_pad;
  268         uint16_t        ik_keyix;       /* key index */
  269         uint8_t         ik_keylen;      /* key length in bytes */
  270         uint8_t         ik_flags;
  271 /* NB: IEEE80211_KEY_XMIT and IEEE80211_KEY_RECV defined elsewhere */
  272 #define IEEE80211_KEY_DEFAULT   0x80    /* default xmit key */
  273         uint8_t         ik_macaddr[IEEE80211_ADDR_LEN];
  274         uint64_t        ik_keyrsc;      /* key receive sequence counter */
  275         uint64_t        ik_keytsc;      /* key transmit sequence counter */
  276         uint8_t         ik_keydata[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE];
  277 };
  278 
  279 /*
  280  * Delete a key either by index or address.  Set the index
  281  * to IEEE80211_KEYIX_NONE when deleting a unicast key.
  282  */
  283 struct ieee80211req_del_key {
  284         uint8_t         idk_keyix;      /* key index */
  285         uint8_t         idk_macaddr[IEEE80211_ADDR_LEN];
  286 };
  287 
  288 /*
  289  * MLME state manipulation request.  IEEE80211_MLME_ASSOC
  290  * only makes sense when operating as a station.  The other
  291  * requests can be used when operating as a station or an
  292  * ap (to effect a station).
  293  */
  294 struct ieee80211req_mlme {
  295         uint8_t         im_op;          /* operation to perform */
  296 #define IEEE80211_MLME_ASSOC            1       /* associate station */
  297 #define IEEE80211_MLME_DISASSOC         2       /* disassociate station */
  298 #define IEEE80211_MLME_DEAUTH           3       /* deauthenticate station */
  299 #define IEEE80211_MLME_AUTHORIZE        4       /* authorize station */
  300 #define IEEE80211_MLME_UNAUTHORIZE      5       /* unauthorize station */
  301 #define IEEE80211_MLME_AUTH             6       /* authenticate station */
  302         uint8_t         im_ssid_len;    /* length of optional ssid */
  303         uint16_t        im_reason;      /* 802.11 reason code */
  304         uint8_t         im_macaddr[IEEE80211_ADDR_LEN];
  305         uint8_t         im_ssid[IEEE80211_NWID_LEN];
  306 };
  307 
  308 /* 
  309  * MAC ACL operations.
  310  */
  311 enum {
  312         IEEE80211_MACCMD_POLICY_OPEN    = 0,    /* set policy: no ACL's */
  313         IEEE80211_MACCMD_POLICY_ALLOW   = 1,    /* set policy: allow traffic */
  314         IEEE80211_MACCMD_POLICY_DENY    = 2,    /* set policy: deny traffic */
  315         IEEE80211_MACCMD_FLUSH          = 3,    /* flush ACL database */
  316         IEEE80211_MACCMD_DETACH         = 4,    /* detach ACL policy */
  317         IEEE80211_MACCMD_POLICY         = 5,    /* get ACL policy */
  318         IEEE80211_MACCMD_LIST           = 6,    /* get ACL database */
  319         IEEE80211_MACCMD_POLICY_RADIUS  = 7,    /* set policy: RADIUS managed */
  320 };
  321 
  322 struct ieee80211req_maclist {
  323         uint8_t         ml_macaddr[IEEE80211_ADDR_LEN];
  324 } __packed;
  325 
  326 /*
  327  * Mesh Routing Table Operations.
  328  */
  329 enum {
  330         IEEE80211_MESH_RTCMD_LIST   = 0, /* list HWMP routing table */
  331         IEEE80211_MESH_RTCMD_FLUSH  = 1, /* flush HWMP routing table */
  332         IEEE80211_MESH_RTCMD_ADD    = 2, /* add entry to the table */
  333         IEEE80211_MESH_RTCMD_DELETE = 3, /* delete an entry from the table */
  334 };
  335 
  336 struct ieee80211req_mesh_route {
  337         uint8_t         imr_flags;
  338 #define IEEE80211_MESHRT_FLAGS_VALID    0x01
  339 #define IEEE80211_MESHRT_FLAGS_PROXY    0x02
  340         uint8_t         imr_dest[IEEE80211_ADDR_LEN];
  341         uint8_t         imr_nexthop[IEEE80211_ADDR_LEN];
  342         uint16_t        imr_nhops;
  343         uint8_t         imr_pad;
  344         uint32_t        imr_metric;
  345         uint32_t        imr_lifetime;
  346         uint32_t        imr_lastmseq;
  347 };
  348 
  349 /*
  350  * HWMP root modes
  351  */
  352 enum {
  353         IEEE80211_HWMP_ROOTMODE_DISABLED        = 0,    /* disabled */
  354         IEEE80211_HWMP_ROOTMODE_NORMAL          = 1,    /* normal PREPs */
  355         IEEE80211_HWMP_ROOTMODE_PROACTIVE       = 2,    /* proactive PREPS */
  356         IEEE80211_HWMP_ROOTMODE_RANN            = 3,    /* use RANN elemid */
  357 };
  358 
  359 
  360 /*
  361  * Set the active channel list by IEEE channel #: each channel
  362  * to be marked active is set in a bit vector.  Note this list is
  363  * intersected with the available channel list in calculating
  364  * the set of channels actually used in scanning.
  365  */
  366 struct ieee80211req_chanlist {
  367         uint8_t         ic_channels[32];        /* NB: can be variable length */
  368 };
  369 
  370 /*
  371  * Get the active channel list info.
  372  */
  373 struct ieee80211req_chaninfo {
  374         u_int   ic_nchans;
  375         struct ieee80211_channel ic_chans[1];   /* NB: variable length */
  376 };
  377 #define IEEE80211_CHANINFO_SIZE(_nchan) \
  378         (sizeof(struct ieee80211req_chaninfo) + \
  379          (((_nchan)-1) * sizeof(struct ieee80211_channel)))
  380 #define IEEE80211_CHANINFO_SPACE(_ci) \
  381         IEEE80211_CHANINFO_SIZE((_ci)->ic_nchans)
  382 
  383 /*
  384  * Retrieve the WPA/RSN information element for an associated station.
  385  */
  386 struct ieee80211req_wpaie {     /* old version w/ only one ie */
  387         uint8_t         wpa_macaddr[IEEE80211_ADDR_LEN];
  388         uint8_t         wpa_ie[IEEE80211_MAX_OPT_IE];
  389 };
  390 struct ieee80211req_wpaie2 {
  391         uint8_t         wpa_macaddr[IEEE80211_ADDR_LEN];
  392         uint8_t         wpa_ie[IEEE80211_MAX_OPT_IE];
  393         uint8_t         rsn_ie[IEEE80211_MAX_OPT_IE];
  394 };
  395 
  396 /*
  397  * Retrieve per-node statistics.
  398  */
  399 struct ieee80211req_sta_stats {
  400         union {
  401                 /* NB: explicitly force 64-bit alignment */
  402                 uint8_t         macaddr[IEEE80211_ADDR_LEN];
  403                 uint64_t        pad;
  404         } is_u;
  405         struct ieee80211_nodestats is_stats;
  406 };
  407 
  408 /*
  409  * Station information block; the mac address is used
  410  * to retrieve other data like stats, unicast key, etc.
  411  */
  412 struct ieee80211req_sta_info {
  413         uint16_t        isi_len;                /* total length (mult of 4) */
  414         uint16_t        isi_ie_off;             /* offset to IE data */
  415         uint16_t        isi_ie_len;             /* IE length */
  416         uint16_t        isi_freq;               /* MHz */
  417         uint32_t        isi_flags;              /* channel flags */
  418         uint32_t        isi_state;              /* state flags */
  419         uint8_t         isi_authmode;           /* authentication algorithm */
  420         int8_t          isi_rssi;               /* receive signal strength */
  421         int8_t          isi_noise;              /* noise floor */
  422         uint8_t         isi_capinfo;            /* capabilities */
  423         uint8_t         isi_erp;                /* ERP element */
  424         uint8_t         isi_macaddr[IEEE80211_ADDR_LEN];
  425         uint8_t         isi_nrates;
  426                                                 /* negotiated rates */
  427         uint8_t         isi_rates[IEEE80211_RATE_MAXSIZE];
  428         uint8_t         isi_txrate;             /* legacy/IEEE rate or MCS */
  429         uint16_t        isi_associd;            /* assoc response */
  430         uint16_t        isi_txpower;            /* current tx power */
  431         uint16_t        isi_vlan;               /* vlan tag */
  432         /* NB: [IEEE80211_NONQOS_TID] holds seq#'s for non-QoS stations */
  433         uint16_t        isi_txseqs[IEEE80211_TID_SIZE];/* tx seq #/TID */
  434         uint16_t        isi_rxseqs[IEEE80211_TID_SIZE];/* rx seq#/TID */
  435         uint16_t        isi_inact;              /* inactivity timer */
  436         uint16_t        isi_txmbps;             /* current tx rate in .5 Mb/s */
  437         uint16_t        isi_pad;
  438         uint32_t        isi_jointime;           /* time of assoc/join */
  439         struct ieee80211_mimo_info isi_mimo;    /* MIMO info for 11n sta's */
  440         /* 11s info */
  441         uint16_t        isi_peerid;
  442         uint16_t        isi_localid;
  443         uint8_t         isi_peerstate;
  444         /* XXX frag state? */
  445         /* variable length IE data */
  446 };
  447 
  448 /*
  449  * Retrieve per-station information; to retrieve all
  450  * specify a mac address of ff:ff:ff:ff:ff:ff.
  451  */
  452 struct ieee80211req_sta_req {
  453         union {
  454                 /* NB: explicitly force 64-bit alignment */
  455                 uint8_t         macaddr[IEEE80211_ADDR_LEN];
  456                 uint64_t        pad;
  457         } is_u;
  458         struct ieee80211req_sta_info info[1];   /* variable length */
  459 };
  460 
  461 /*
  462  * Get/set per-station tx power cap.
  463  */
  464 struct ieee80211req_sta_txpow {
  465         uint8_t         it_macaddr[IEEE80211_ADDR_LEN];
  466         uint8_t         it_txpow;
  467 };
  468 
  469 /*
  470  * WME parameters manipulated with IEEE80211_IOC_WME_CWMIN
  471  * through IEEE80211_IOC_WME_ACKPOLICY are set and return
  472  * using i_val and i_len.  i_val holds the value itself.
  473  * i_len specifies the AC and, as appropriate, then high bit
  474  * specifies whether the operation is to be applied to the
  475  * BSS or ourself.
  476  */
  477 #define IEEE80211_WMEPARAM_SELF 0x0000          /* parameter applies to self */
  478 #define IEEE80211_WMEPARAM_BSS  0x8000          /* parameter applies to BSS */
  479 #define IEEE80211_WMEPARAM_VAL  0x7fff          /* parameter value */
  480 
  481 /*
  482  * Application Information Elements can be appended to a variety
  483  * of frames with the IEE80211_IOC_APPIE request.  This request
  484  * piggybacks on a normal ieee80211req; the frame type is passed
  485  * in i_val as the 802.11 FC0 bytes and the length of the IE data
  486  * is passed in i_len.  The data is referenced in i_data.  If i_len
  487  * is zero then any previously configured IE data is removed.  At
  488  * most IEEE80211_MAX_APPIE data be appened.  Note that multiple
  489  * IE's can be supplied; the data is treated opaquely.
  490  */
  491 #define IEEE80211_MAX_APPIE     1024            /* max app IE data */
  492 /*
  493  * Hack: the WPA authenticator uses this mechanism to specify WPA
  494  * ie's that are used instead of the ones normally constructed using
  495  * the cipher state setup with separate ioctls.  This avoids issues
  496  * like the authenticator ordering ie data differently than the
  497  * net80211 layer and needing to keep separate state for WPA and RSN.
  498  */
  499 #define IEEE80211_APPIE_WPA \
  500         (IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_BEACON | \
  501          IEEE80211_FC0_SUBTYPE_PROBE_RESP)
  502 
  503 /*
  504  * Station mode roaming parameters.  These are maintained
  505  * per band/mode and control the roaming algorithm.
  506  */
  507 struct ieee80211_roamparams_req {
  508         struct ieee80211_roamparam params[IEEE80211_MODE_MAX];
  509 };
  510 
  511 /*
  512  * Transmit parameters.  These can be used to set fixed transmit
  513  * rate for each operating mode when operating as client or on a
  514  * per-client basis according to the capabilities of the client
  515  * (e.g. an 11b client associated to an 11g ap) when operating as
  516  * an ap.
  517  *
  518  * MCS are distinguished from legacy rates by or'ing in 0x80.
  519  */
  520 struct ieee80211_txparams_req {
  521         struct ieee80211_txparam params[IEEE80211_MODE_MAX];
  522 };
  523 
  524 /*
  525  * Set regulatory domain state with IEEE80211_IOC_REGDOMAIN.
  526  * Note this is both the regulatory description and the channel
  527  * list.  The get request for IEEE80211_IOC_REGDOMAIN returns
  528  * only the regdomain info; the channel list is obtained
  529  * separately with IEEE80211_IOC_CHANINFO.
  530  */
  531 struct ieee80211_regdomain_req {
  532         struct ieee80211_regdomain      rd;
  533         struct ieee80211req_chaninfo    chaninfo;
  534 };
  535 #define IEEE80211_REGDOMAIN_SIZE(_nchan) \
  536         (sizeof(struct ieee80211_regdomain_req) + \
  537          (((_nchan)-1) * sizeof(struct ieee80211_channel)))
  538 #define IEEE80211_REGDOMAIN_SPACE(_req) \
  539         IEEE80211_REGDOMAIN_SIZE((_req)->chaninfo.ic_nchans)
  540 
  541 /*
  542  * Get driver capabilities.  Driver, hardware crypto, and
  543  * HT/802.11n capabilities, and a table that describes what
  544  * the radio can do.
  545  */
  546 struct ieee80211_devcaps_req {
  547         uint32_t        dc_drivercaps;          /* general driver caps */
  548         uint32_t        dc_cryptocaps;          /* hardware crypto support */
  549         uint32_t        dc_htcaps;              /* HT/802.11n support */
  550         struct ieee80211req_chaninfo dc_chaninfo;
  551 };
  552 #define IEEE80211_DEVCAPS_SIZE(_nchan) \
  553         (sizeof(struct ieee80211_devcaps_req) + \
  554          (((_nchan)-1) * sizeof(struct ieee80211_channel)))
  555 #define IEEE80211_DEVCAPS_SPACE(_dc) \
  556         IEEE80211_DEVCAPS_SIZE((_dc)->dc_chaninfo.ic_nchans)
  557 
  558 struct ieee80211_chanswitch_req {
  559         struct ieee80211_channel csa_chan;      /* new channel */
  560         int             csa_mode;               /* CSA mode */
  561         int             csa_count;              /* beacon count to switch */
  562 };
  563 
  564 /*
  565  * Get/set per-station vlan tag.
  566  */
  567 struct ieee80211req_sta_vlan {
  568         uint8_t         sv_macaddr[IEEE80211_ADDR_LEN];
  569         uint16_t        sv_vlan;
  570 };
  571 
  572 #ifdef __FreeBSD__
  573 /*
  574  * FreeBSD-style ioctls.
  575  */
  576 /* the first member must be matched with struct ifreq */
  577 struct ieee80211req {
  578         char            i_name[IFNAMSIZ];       /* if_name, e.g. "wi0" */
  579         uint16_t        i_type;                 /* req type */
  580         int16_t         i_val;                  /* Index or simple value */
  581         int16_t         i_len;                  /* Index or simple value */
  582         void            *i_data;                /* Extra data */
  583 };
  584 #define SIOCS80211               _IOW('i', 234, struct ieee80211req)
  585 #define SIOCG80211              _IOWR('i', 235, struct ieee80211req)
  586 #define SIOCG80211STATS         _IOWR('i', 236, struct ifreq)
  587 
  588 #define IEEE80211_IOC_SSID              1
  589 #define IEEE80211_IOC_NUMSSIDS          2
  590 #define IEEE80211_IOC_WEP               3
  591 #define         IEEE80211_WEP_NOSUP     -1
  592 #define         IEEE80211_WEP_OFF       0
  593 #define         IEEE80211_WEP_ON        1
  594 #define         IEEE80211_WEP_MIXED     2
  595 #define IEEE80211_IOC_WEPKEY            4
  596 #define IEEE80211_IOC_NUMWEPKEYS        5
  597 #define IEEE80211_IOC_WEPTXKEY          6
  598 #define IEEE80211_IOC_AUTHMODE          7
  599 #define IEEE80211_IOC_STATIONNAME       8
  600 #define IEEE80211_IOC_CHANNEL           9
  601 #define IEEE80211_IOC_POWERSAVE         10
  602 #define         IEEE80211_POWERSAVE_NOSUP       -1
  603 #define         IEEE80211_POWERSAVE_OFF         0
  604 #define         IEEE80211_POWERSAVE_CAM         1
  605 #define         IEEE80211_POWERSAVE_PSP         2
  606 #define         IEEE80211_POWERSAVE_PSP_CAM     3
  607 #define         IEEE80211_POWERSAVE_ON          IEEE80211_POWERSAVE_CAM
  608 #define IEEE80211_IOC_POWERSAVESLEEP    11
  609 #define IEEE80211_IOC_RTSTHRESHOLD      12
  610 #define IEEE80211_IOC_PROTMODE          13
  611 #define         IEEE80211_PROTMODE_OFF          0
  612 #define         IEEE80211_PROTMODE_CTS          1
  613 #define         IEEE80211_PROTMODE_RTSCTS       2
  614 #define IEEE80211_IOC_TXPOWER           14      /* global tx power limit */
  615 #define IEEE80211_IOC_BSSID             15
  616 #define IEEE80211_IOC_ROAMING           16      /* roaming mode */
  617 #define IEEE80211_IOC_PRIVACY           17      /* privacy invoked */
  618 #define IEEE80211_IOC_DROPUNENCRYPTED   18      /* discard unencrypted frames */
  619 #define IEEE80211_IOC_WPAKEY            19
  620 #define IEEE80211_IOC_DELKEY            20
  621 #define IEEE80211_IOC_MLME              21
  622 /* 22 was IEEE80211_IOC_OPTIE, replaced by IEEE80211_IOC_APPIE */
  623 /* 23 was IEEE80211_IOC_SCAN_REQ */
  624 /* 24 was IEEE80211_IOC_SCAN_RESULTS */
  625 #define IEEE80211_IOC_COUNTERMEASURES   25      /* WPA/TKIP countermeasures */
  626 #define IEEE80211_IOC_WPA               26      /* WPA mode (0,1,2) */
  627 #define IEEE80211_IOC_CHANLIST          27      /* channel list */
  628 #define IEEE80211_IOC_WME               28      /* WME mode (on, off) */
  629 #define IEEE80211_IOC_HIDESSID          29      /* hide SSID mode (on, off) */
  630 #define IEEE80211_IOC_APBRIDGE          30      /* AP inter-sta bridging */
  631 /* 31-35,37-38 were for WPA authenticator settings */
  632 /* 36 was IEEE80211_IOC_DRIVER_CAPS */
  633 #define IEEE80211_IOC_WPAIE             39      /* WPA information element */
  634 #define IEEE80211_IOC_STA_STATS         40      /* per-station statistics */
  635 #define IEEE80211_IOC_MACCMD            41      /* MAC ACL operation */
  636 #define IEEE80211_IOC_CHANINFO          42      /* channel info list */
  637 #define IEEE80211_IOC_TXPOWMAX          43      /* max tx power for channel */
  638 #define IEEE80211_IOC_STA_TXPOW         44      /* per-station tx power limit */
  639 /* 45 was IEEE80211_IOC_STA_INFO */
  640 #define IEEE80211_IOC_WME_CWMIN         46      /* WME: ECWmin */
  641 #define IEEE80211_IOC_WME_CWMAX         47      /* WME: ECWmax */
  642 #define IEEE80211_IOC_WME_AIFS          48      /* WME: AIFSN */
  643 #define IEEE80211_IOC_WME_TXOPLIMIT     49      /* WME: txops limit */
  644 #define IEEE80211_IOC_WME_ACM           50      /* WME: ACM (bss only) */
  645 #define IEEE80211_IOC_WME_ACKPOLICY     51      /* WME: ACK policy (!bss only)*/
  646 #define IEEE80211_IOC_DTIM_PERIOD       52      /* DTIM period (beacons) */
  647 #define IEEE80211_IOC_BEACON_INTERVAL   53      /* beacon interval (ms) */
  648 #define IEEE80211_IOC_ADDMAC            54      /* add sta to MAC ACL table */
  649 #define IEEE80211_IOC_DELMAC            55      /* del sta from MAC ACL table */
  650 #define IEEE80211_IOC_PUREG             56      /* pure 11g (no 11b stations) */
  651 #define IEEE80211_IOC_FF                57      /* ATH fast frames (on, off) */
  652 #define IEEE80211_IOC_TURBOP            58      /* ATH turbo' (on, off) */
  653 #define IEEE80211_IOC_BGSCAN            59      /* bg scanning (on, off) */
  654 #define IEEE80211_IOC_BGSCAN_IDLE       60      /* bg scan idle threshold */
  655 #define IEEE80211_IOC_BGSCAN_INTERVAL   61      /* bg scan interval */
  656 #define IEEE80211_IOC_SCANVALID         65      /* scan cache valid threshold */
  657 /* 66-72 were IEEE80211_IOC_ROAM_* and IEEE80211_IOC_MCAST_RATE */
  658 #define IEEE80211_IOC_FRAGTHRESHOLD     73      /* tx fragmentation threshold */
  659 #define IEEE80211_IOC_BURST             75      /* packet bursting */
  660 #define IEEE80211_IOC_SCAN_RESULTS      76      /* get scan results */
  661 #define IEEE80211_IOC_BMISSTHRESHOLD    77      /* beacon miss threshold */
  662 #define IEEE80211_IOC_STA_INFO          78      /* station/neighbor info */
  663 #define IEEE80211_IOC_WPAIE2            79      /* WPA+RSN info elements */
  664 #define IEEE80211_IOC_CURCHAN           80      /* current channel */
  665 #define IEEE80211_IOC_SHORTGI           81      /* 802.11n half GI */
  666 #define IEEE80211_IOC_AMPDU             82      /* 802.11n A-MPDU (on, off) */
  667 #define IEEE80211_IOC_AMPDU_LIMIT       83      /* A-MPDU length limit */
  668 #define IEEE80211_IOC_AMPDU_DENSITY     84      /* A-MPDU density */
  669 #define IEEE80211_IOC_AMSDU             85      /* 802.11n A-MSDU (on, off) */
  670 #define IEEE80211_IOC_AMSDU_LIMIT       86      /* A-MSDU length limit */
  671 #define IEEE80211_IOC_PUREN             87      /* pure 11n (no legacy sta's) */
  672 #define IEEE80211_IOC_DOTH              88      /* 802.11h (on, off) */
  673 /* 89-91 were regulatory items */
  674 #define IEEE80211_IOC_HTCOMPAT          92      /* support pre-D1.10 HT ie's */
  675 #define IEEE80211_IOC_DWDS              93      /* DWDS/4-address handling */
  676 #define IEEE80211_IOC_INACTIVITY        94      /* sta inactivity handling */
  677 #define IEEE80211_IOC_APPIE             95      /* application IE's */
  678 #define IEEE80211_IOC_WPS               96      /* WPS operation */
  679 #define IEEE80211_IOC_TSN               97      /* TSN operation */
  680 #define IEEE80211_IOC_DEVCAPS           98      /* driver+device capabilities */
  681 #define IEEE80211_IOC_CHANSWITCH        99      /* start 11h channel switch */
  682 #define IEEE80211_IOC_DFS               100     /* DFS (on, off) */
  683 #define IEEE80211_IOC_DOTD              101     /* 802.11d (on, off) */
  684 #define IEEE80211_IOC_HTPROTMODE        102     /* HT protection (off, rts) */
  685 #define IEEE80211_IOC_SCAN_REQ          103     /* scan w/ specified params */
  686 #define IEEE80211_IOC_SCAN_CANCEL       104     /* cancel ongoing scan */
  687 #define IEEE80211_IOC_HTCONF            105     /* HT config (off, HT20, HT40)*/
  688 #define IEEE80211_IOC_REGDOMAIN         106     /* regulatory domain info */
  689 #define IEEE80211_IOC_ROAM              107     /* roaming params en masse */
  690 #define IEEE80211_IOC_TXPARAMS          108     /* tx parameters */
  691 #define IEEE80211_IOC_STA_VLAN          109     /* per-station vlan tag */
  692 #define IEEE80211_IOC_SMPS              110     /* MIMO power save */
  693 #define IEEE80211_IOC_RIFS              111     /* RIFS config (on, off) */
  694 #define IEEE80211_IOC_GREENFIELD        112     /* Greenfield (on, off) */
  695 #define IEEE80211_IOC_STBC              113     /* STBC Tx/RX (on, off) */
  696 
  697 #define IEEE80211_IOC_MESH_ID           170     /* mesh identifier */
  698 #define IEEE80211_IOC_MESH_AP           171     /* accepting peerings */
  699 #define IEEE80211_IOC_MESH_FWRD         172     /* forward frames */
  700 #define IEEE80211_IOC_MESH_PROTO        173     /* mesh protocols */
  701 #define IEEE80211_IOC_MESH_TTL          174     /* mesh TTL */
  702 #define IEEE80211_IOC_MESH_RTCMD        175     /* mesh routing table commands*/
  703 #define IEEE80211_IOC_MESH_PR_METRIC    176     /* mesh metric protocol */
  704 #define IEEE80211_IOC_MESH_PR_PATH      177     /* mesh path protocol */
  705 #define IEEE80211_IOC_MESH_PR_SIG       178     /* mesh sig protocol */
  706 #define IEEE80211_IOC_MESH_PR_CC        179     /* mesh congestion protocol */
  707 #define IEEE80211_IOC_MESH_PR_AUTH      180     /* mesh auth protocol */
  708 
  709 #define IEEE80211_IOC_HWMP_ROOTMODE     190     /* HWMP root mode */
  710 #define IEEE80211_IOC_HWMP_MAXHOPS      191     /* number of hops before drop */
  711 #define IEEE80211_IOC_HWMP_TTL          192     /* HWMP TTL */
  712 
  713 #define IEEE80211_IOC_TDMA_SLOT         201     /* TDMA: assigned slot */
  714 #define IEEE80211_IOC_TDMA_SLOTCNT      202     /* TDMA: slots in bss */
  715 #define IEEE80211_IOC_TDMA_SLOTLEN      203     /* TDMA: slot length (usecs) */
  716 #define IEEE80211_IOC_TDMA_BINTERVAL    204     /* TDMA: beacon intvl (slots) */
  717 
  718 /*
  719  * Parameters for controlling a scan requested with
  720  * IEEE80211_IOC_SCAN_REQ.
  721  *
  722  * Active scans cause ProbeRequest frames to be issued for each
  723  * specified ssid and, by default, a broadcast ProbeRequest frame.
  724  * The set of ssid's is specified in the request.
  725  *
  726  * By default the scan will cause a BSS to be joined (in station/adhoc
  727  * mode) or a channel to be selected for operation (hostap mode).
  728  * To disable that specify IEEE80211_IOC_SCAN_NOPICK and if the
  729  *
  730  * If the station is currently associated to an AP then a scan request
  731  * will cause the station to leave the current channel and potentially
  732  * miss frames from the AP.  Alternatively the station may notify the
  733  * AP that it is going into power save mode before it leaves the channel.
  734  * This ensures frames for the station are buffered by the AP.  This is
  735  * termed a ``bg scan'' and is requested with the IEEE80211_IOC_SCAN_BGSCAN
  736  * flag.  Background scans may take longer than foreground scans and may
  737  * be preempted by traffic.  If a station is not associated to an AP
  738  * then a request for a background scan is automatically done in the
  739  * foreground.
  740  *
  741  * The results of the scan request are cached by the system.  This
  742  * information is aged out and/or invalidated based on events like not
  743  * being able to associated to an AP.  To flush the current cache
  744  * contents before doing a scan the IEEE80211_IOC_SCAN_FLUSH flag may
  745  * be specified.
  746  *
  747  * By default the scan will be done until a suitable AP is located
  748  * or a channel is found for use.  A scan can also be constrained
  749  * to be done once (IEEE80211_IOC_SCAN_ONCE) or to last for no more
  750  * than a specified duration.
  751  */
  752 struct ieee80211_scan_req {
  753         int             sr_flags;
  754 #define IEEE80211_IOC_SCAN_NOPICK       0x00001 /* scan only, no selection */
  755 #define IEEE80211_IOC_SCAN_ACTIVE       0x00002 /* active scan (probe req) */
  756 #define IEEE80211_IOC_SCAN_PICK1ST      0x00004 /* ``hey sailor'' mode */
  757 #define IEEE80211_IOC_SCAN_BGSCAN       0x00008 /* bg scan, exit ps at end */
  758 #define IEEE80211_IOC_SCAN_ONCE         0x00010 /* do one complete pass */
  759 #define IEEE80211_IOC_SCAN_NOBCAST      0x00020 /* don't send bcast probe req */
  760 #define IEEE80211_IOC_SCAN_NOJOIN       0x00040 /* no auto-sequencing */
  761 #define IEEE80211_IOC_SCAN_FLUSH        0x10000 /* flush scan cache first */
  762 #define IEEE80211_IOC_SCAN_CHECK        0x20000 /* check scan cache first */
  763         u_int           sr_duration;            /* duration (ms) */
  764 #define IEEE80211_IOC_SCAN_DURATION_MIN 1
  765 #define IEEE80211_IOC_SCAN_DURATION_MAX 0x7fffffff
  766 #define IEEE80211_IOC_SCAN_FOREVER      IEEE80211_IOC_SCAN_DURATION_MAX
  767         u_int           sr_mindwell;            /* min channel dwelltime (ms) */
  768         u_int           sr_maxdwell;            /* max channel dwelltime (ms) */
  769         int             sr_nssid;
  770 #define IEEE80211_IOC_SCAN_MAX_SSID     3
  771         struct {
  772                 int      len;                           /* length in bytes */
  773                 uint8_t ssid[IEEE80211_NWID_LEN];       /* ssid contents */
  774         } sr_ssid[IEEE80211_IOC_SCAN_MAX_SSID];
  775 };
  776 
  777 /*
  778  * Scan result data returned for IEEE80211_IOC_SCAN_RESULTS.
  779  * Each result is a fixed size structure followed by a variable
  780  * length SSID and one or more variable length information elements.
  781  * The size of each variable length item is found in the fixed
  782  * size structure and the entire length of the record is specified
  783  * in isr_len.  Result records are rounded to a multiple of 4 bytes.
  784  */
  785 struct ieee80211req_scan_result {
  786         uint16_t        isr_len;                /* total length (mult of 4) */
  787         uint16_t        isr_ie_off;             /* offset to SSID+IE data */
  788         uint16_t        isr_ie_len;             /* IE length */
  789         uint16_t        isr_freq;               /* MHz */
  790         uint16_t        isr_flags;              /* channel flags */
  791         int8_t          isr_noise;
  792         int8_t          isr_rssi;
  793         uint8_t         isr_intval;             /* beacon interval */
  794         uint8_t         isr_capinfo;            /* capabilities */
  795         uint8_t         isr_erp;                /* ERP element */
  796         uint8_t         isr_bssid[IEEE80211_ADDR_LEN];
  797         uint8_t         isr_nrates;
  798         uint8_t         isr_rates[IEEE80211_RATE_MAXSIZE];
  799         uint8_t         isr_ssid_len;           /* SSID length */
  800         uint8_t         isr_meshid_len;         /* MESH ID length */
  801         /* variable length SSID, followed by variable length MESH ID,
  802           followed by IE data */
  803 };
  804 
  805 /*
  806  * Virtual AP cloning parameters.  The parent device must
  807  * be a vap-capable device.  All parameters specified with
  808  * the clone request are fixed for the lifetime of the vap.
  809  *
  810  * There are two flavors of WDS vaps: legacy and dynamic.
  811  * Legacy WDS operation implements a static binding between
  812  * two stations encapsulating traffic in 4-address frames.
  813  * Dynamic WDS vaps are created when a station associates to
  814  * an AP and sends a 4-address frame.  If the AP vap is
  815  * configured to support WDS then this will generate an
  816  * event to user programs listening on the routing socket
  817  * and a Dynamic WDS vap will be created to handle traffic
  818  * to/from that station.  In both cases the bssid of the
  819  * peer must be specified when creating the vap.
  820  *
  821  * By default a vap will inherit the mac address/bssid of
  822  * the underlying device.  To request a unique address the
  823  * IEEE80211_CLONE_BSSID flag should be supplied.  This is
  824  * meaningless for WDS vaps as they share the bssid of an
  825  * AP vap that must otherwise exist.  Note that some devices
  826  * may not be able to support multiple addresses.
  827  *
  828  * Station mode vap's normally depend on the device to notice
  829  * when the AP stops sending beacon frames.  If IEEE80211_CLONE_NOBEACONS
  830  * is specified the net80211 layer will do this in s/w.  This
  831  * is mostly useful when setting up a WDS repeater/extender where
  832  * an AP vap is combined with a sta vap and the device isn't able
  833  * to track beacon frames in hardware.
  834  */
  835 struct ieee80211_clone_params {
  836         char    icp_parent[IFNAMSIZ];           /* parent device */
  837         uint16_t icp_opmode;                    /* operating mode */
  838         uint16_t icp_flags;                     /* see below */
  839         uint8_t icp_bssid[IEEE80211_ADDR_LEN];  /* for WDS links */
  840         uint8_t icp_macaddr[IEEE80211_ADDR_LEN];/* local address */
  841 };
  842 #define IEEE80211_CLONE_BSSID           0x0001  /* allocate unique mac/bssid */
  843 #define IEEE80211_CLONE_NOBEACONS       0x0002  /* don't setup beacon timers */
  844 #define IEEE80211_CLONE_WDSLEGACY       0x0004  /* legacy WDS processing */
  845 #define IEEE80211_CLONE_MACADDR         0x0008  /* use specified mac addr */
  846 #define IEEE80211_CLONE_TDMA            0x0010  /* operate in TDMA mode */
  847 #endif /* __FreeBSD__ */
  848 
  849 #endif /* _NET80211_IEEE80211_IOCTL_H_ */

Cache object: b83fb18842691635642da5f6c531cba9


[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]


This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.