1 /*-
2 * Copyright (c) 2007-2008 Sam Leffler, Errno Consulting
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 *
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
15 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
16 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
17 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
18 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
19 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
20 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
21 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
22 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
23 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
24 */
25
26 #include <sys/cdefs.h>
27 __FBSDID("$FreeBSD$");
28
29 /*
30 * IEEE 802.11 PHY-related support.
31 */
32
33 #include "opt_inet.h"
34
35 #include <sys/param.h>
36 #include <sys/kernel.h>
37 #include <sys/systm.h>
38
39 #include <sys/socket.h>
40
41 #include <net/if.h>
42 #include <net/if_media.h>
43
44 #include <net80211/ieee80211_var.h>
45 #include <net80211/ieee80211_phy.h>
46
47 #ifdef notyet
48 struct ieee80211_ds_plcp_hdr {
49 uint8_t i_signal;
50 uint8_t i_service;
51 uint16_t i_length;
52 uint16_t i_crc;
53 } __packed;
54
55 #endif /* notyet */
56
57 /* shorthands to compact tables for readability */
58 #define OFDM IEEE80211_T_OFDM
59 #define CCK IEEE80211_T_CCK
60 #define TURBO IEEE80211_T_TURBO
61 #define HALF IEEE80211_T_OFDM_HALF
62 #define QUART IEEE80211_T_OFDM_QUARTER
63 #define PBCC (IEEE80211_T_OFDM_QUARTER+1) /* XXX */
64 #define B(r) (0x80 | r)
65 #define Mb(x) (x*1000)
66
67 static struct ieee80211_rate_table ieee80211_11b_table = {
68 .rateCount = 4, /* XXX no PBCC */
69 .info = {
70 /* short ctrl */
71 /* Preamble dot11Rate Rate */
72 [0] = { .phy = CCK, 1000, 0x00, B(2), 0 },/* 1 Mb */
73 [1] = { .phy = CCK, 2000, 0x04, B(4), 1 },/* 2 Mb */
74 [2] = { .phy = CCK, 5500, 0x04, B(11), 1 },/* 5.5 Mb */
75 [3] = { .phy = CCK, 11000, 0x04, B(22), 1 },/* 11 Mb */
76 [4] = { .phy = PBCC, 22000, 0x04, 44, 3 } /* 22 Mb */
77 },
78 };
79
80 static struct ieee80211_rate_table ieee80211_11g_table = {
81 .rateCount = 12,
82 .info = {
83 /* short ctrl */
84 /* Preamble dot11Rate Rate */
85 [0] = { .phy = CCK, 1000, 0x00, B(2), 0 },
86 [1] = { .phy = CCK, 2000, 0x04, B(4), 1 },
87 [2] = { .phy = CCK, 5500, 0x04, B(11), 2 },
88 [3] = { .phy = CCK, 11000, 0x04, B(22), 3 },
89 [4] = { .phy = OFDM, 6000, 0x00, 12, 4 },
90 [5] = { .phy = OFDM, 9000, 0x00, 18, 4 },
91 [6] = { .phy = OFDM, 12000, 0x00, 24, 6 },
92 [7] = { .phy = OFDM, 18000, 0x00, 36, 6 },
93 [8] = { .phy = OFDM, 24000, 0x00, 48, 8 },
94 [9] = { .phy = OFDM, 36000, 0x00, 72, 8 },
95 [10] = { .phy = OFDM, 48000, 0x00, 96, 8 },
96 [11] = { .phy = OFDM, 54000, 0x00, 108, 8 }
97 },
98 };
99
100 static struct ieee80211_rate_table ieee80211_11a_table = {
101 .rateCount = 8,
102 .info = {
103 /* short ctrl */
104 /* Preamble dot11Rate Rate */
105 [0] = { .phy = OFDM, 6000, 0x00, B(12), 0 },
106 [1] = { .phy = OFDM, 9000, 0x00, 18, 0 },
107 [2] = { .phy = OFDM, 12000, 0x00, B(24), 2 },
108 [3] = { .phy = OFDM, 18000, 0x00, 36, 2 },
109 [4] = { .phy = OFDM, 24000, 0x00, B(48), 4 },
110 [5] = { .phy = OFDM, 36000, 0x00, 72, 4 },
111 [6] = { .phy = OFDM, 48000, 0x00, 96, 4 },
112 [7] = { .phy = OFDM, 54000, 0x00, 108, 4 }
113 },
114 };
115
116 static struct ieee80211_rate_table ieee80211_half_table = {
117 .rateCount = 8,
118 .info = {
119 /* short ctrl */
120 /* Preamble dot11Rate Rate */
121 [0] = { .phy = HALF, 3000, 0x00, B(6), 0 },
122 [1] = { .phy = HALF, 4500, 0x00, 9, 0 },
123 [2] = { .phy = HALF, 6000, 0x00, B(12), 2 },
124 [3] = { .phy = HALF, 9000, 0x00, 18, 2 },
125 [4] = { .phy = HALF, 12000, 0x00, B(24), 4 },
126 [5] = { .phy = HALF, 18000, 0x00, 36, 4 },
127 [6] = { .phy = HALF, 24000, 0x00, 48, 4 },
128 [7] = { .phy = HALF, 27000, 0x00, 54, 4 }
129 },
130 };
131
132 static struct ieee80211_rate_table ieee80211_quarter_table = {
133 .rateCount = 8,
134 .info = {
135 /* short ctrl */
136 /* Preamble dot11Rate Rate */
137 [0] = { .phy = QUART, 1500, 0x00, B(3), 0 },
138 [1] = { .phy = QUART, 2250, 0x00, 4, 0 },
139 [2] = { .phy = QUART, 3000, 0x00, B(9), 2 },
140 [3] = { .phy = QUART, 4500, 0x00, 9, 2 },
141 [4] = { .phy = QUART, 6000, 0x00, B(12), 4 },
142 [5] = { .phy = QUART, 9000, 0x00, 18, 4 },
143 [6] = { .phy = QUART, 12000, 0x00, 24, 4 },
144 [7] = { .phy = QUART, 13500, 0x00, 27, 4 }
145 },
146 };
147
148 static struct ieee80211_rate_table ieee80211_turbog_table = {
149 .rateCount = 7,
150 .info = {
151 /* short ctrl */
152 /* Preamble dot11Rate Rate */
153 [0] = { .phy = TURBO, 12000, 0x00, B(12), 0 },
154 [1] = { .phy = TURBO, 24000, 0x00, B(24), 1 },
155 [2] = { .phy = TURBO, 36000, 0x00, 36, 1 },
156 [3] = { .phy = TURBO, 48000, 0x00, B(48), 3 },
157 [4] = { .phy = TURBO, 72000, 0x00, 72, 3 },
158 [5] = { .phy = TURBO, 96000, 0x00, 96, 3 },
159 [6] = { .phy = TURBO, 108000, 0x00, 108, 3 }
160 },
161 };
162
163 static struct ieee80211_rate_table ieee80211_turboa_table = {
164 .rateCount = 8,
165 .info = {
166 /* short ctrl */
167 /* Preamble dot11Rate Rate */
168 [0] = { .phy = TURBO, 12000, 0x00, B(12), 0 },
169 [1] = { .phy = TURBO, 18000, 0x00, 18, 0 },
170 [2] = { .phy = TURBO, 24000, 0x00, B(24), 2 },
171 [3] = { .phy = TURBO, 36000, 0x00, 36, 2 },
172 [4] = { .phy = TURBO, 48000, 0x00, B(48), 4 },
173 [5] = { .phy = TURBO, 72000, 0x00, 72, 4 },
174 [6] = { .phy = TURBO, 96000, 0x00, 96, 4 },
175 [7] = { .phy = TURBO, 108000, 0x00, 108, 4 }
176 },
177 };
178
179 #undef Mb
180 #undef B
181 #undef OFDM
182 #undef HALF
183 #undef QUART
184 #undef CCK
185 #undef TURBO
186 #undef XR
187
188 /*
189 * Setup a rate table's reverse lookup table and fill in
190 * ack durations. The reverse lookup tables are assumed
191 * to be initialized to zero (or at least the first entry).
192 * We use this as a key that indicates whether or not
193 * we've previously setup the reverse lookup table.
194 *
195 * XXX not reentrant, but shouldn't matter
196 */
197 static void
198 ieee80211_setup_ratetable(struct ieee80211_rate_table *rt)
199 {
200 #define N(a) (sizeof(a)/sizeof(a[0]))
201 #define WLAN_CTRL_FRAME_SIZE \
202 (sizeof(struct ieee80211_frame_ack) + IEEE80211_CRC_LEN)
203
204 int i;
205
206 for (i = 0; i < N(rt->rateCodeToIndex); i++)
207 rt->rateCodeToIndex[i] = (uint8_t) -1;
208 for (i = 0; i < rt->rateCount; i++) {
209 uint8_t code = rt->info[i].dot11Rate;
210 uint8_t cix = rt->info[i].ctlRateIndex;
211 uint8_t ctl_rate = rt->info[cix].dot11Rate;
212
213 rt->rateCodeToIndex[code] = i;
214 if (code & IEEE80211_RATE_BASIC) {
215 /*
216 * Map w/o basic rate bit too.
217 */
218 code &= IEEE80211_RATE_VAL;
219 rt->rateCodeToIndex[code] = i;
220 }
221
222 /*
223 * XXX for 11g the control rate to use for 5.5 and 11 Mb/s
224 * depends on whether they are marked as basic rates;
225 * the static tables are setup with an 11b-compatible
226 * 2Mb/s rate which will work but is suboptimal
227 *
228 * NB: Control rate is always less than or equal to the
229 * current rate, so control rate's reverse lookup entry
230 * has been installed and following call is safe.
231 */
232 rt->info[i].lpAckDuration = ieee80211_compute_duration(rt,
233 WLAN_CTRL_FRAME_SIZE, ctl_rate, 0);
234 rt->info[i].spAckDuration = ieee80211_compute_duration(rt,
235 WLAN_CTRL_FRAME_SIZE, ctl_rate, IEEE80211_F_SHPREAMBLE);
236 }
237
238 #undef WLAN_CTRL_FRAME_SIZE
239 #undef N
240 }
241
242 /* Setup all rate tables */
243 static void
244 ieee80211_phy_init(void)
245 {
246 #define N(arr) (int)(sizeof(arr) / sizeof(arr[0]))
247 static struct ieee80211_rate_table * const ratetables[] = {
248 &ieee80211_half_table,
249 &ieee80211_quarter_table,
250 &ieee80211_11a_table,
251 &ieee80211_11g_table,
252 &ieee80211_turbog_table,
253 &ieee80211_turboa_table,
254 &ieee80211_turboa_table,
255 &ieee80211_11a_table,
256 &ieee80211_11g_table,
257 &ieee80211_11b_table
258 };
259 int i;
260
261 for (i = 0; i < N(ratetables); ++i)
262 ieee80211_setup_ratetable(ratetables[i]);
263
264 #undef N
265 }
266 SYSINIT(wlan_phy, SI_SUB_DRIVERS, SI_ORDER_FIRST, ieee80211_phy_init, NULL);
267
268 const struct ieee80211_rate_table *
269 ieee80211_get_ratetable(struct ieee80211_channel *c)
270 {
271 const struct ieee80211_rate_table *rt;
272
273 /* XXX HT */
274 if (IEEE80211_IS_CHAN_HALF(c))
275 rt = &ieee80211_half_table;
276 else if (IEEE80211_IS_CHAN_QUARTER(c))
277 rt = &ieee80211_quarter_table;
278 else if (IEEE80211_IS_CHAN_HTA(c))
279 rt = &ieee80211_11a_table; /* XXX */
280 else if (IEEE80211_IS_CHAN_HTG(c))
281 rt = &ieee80211_11g_table; /* XXX */
282 else if (IEEE80211_IS_CHAN_108G(c))
283 rt = &ieee80211_turbog_table;
284 else if (IEEE80211_IS_CHAN_ST(c))
285 rt = &ieee80211_turboa_table;
286 else if (IEEE80211_IS_CHAN_TURBO(c))
287 rt = &ieee80211_turboa_table;
288 else if (IEEE80211_IS_CHAN_A(c))
289 rt = &ieee80211_11a_table;
290 else if (IEEE80211_IS_CHAN_ANYG(c))
291 rt = &ieee80211_11g_table;
292 else if (IEEE80211_IS_CHAN_B(c))
293 rt = &ieee80211_11b_table;
294 else {
295 /* NB: should not get here */
296 panic("%s: no rate table for channel; freq %u flags 0x%x\n",
297 __func__, c->ic_freq, c->ic_flags);
298 }
299 return rt;
300 }
301
302 /*
303 * Convert PLCP signal/rate field to 802.11 rate (.5Mbits/s)
304 *
305 * Note we do no parameter checking; this routine is mainly
306 * used to derive an 802.11 rate for constructing radiotap
307 * header data for rx frames.
308 *
309 * XXX might be a candidate for inline
310 */
311 uint8_t
312 ieee80211_plcp2rate(uint8_t plcp, enum ieee80211_phytype type)
313 {
314 if (type == IEEE80211_T_OFDM) {
315 static const uint8_t ofdm_plcp2rate[16] = {
316 [0xb] = 12,
317 [0xf] = 18,
318 [0xa] = 24,
319 [0xe] = 36,
320 [0x9] = 48,
321 [0xd] = 72,
322 [0x8] = 96,
323 [0xc] = 108
324 };
325 return ofdm_plcp2rate[plcp & 0xf];
326 }
327 if (type == IEEE80211_T_CCK) {
328 static const uint8_t cck_plcp2rate[16] = {
329 [0xa] = 2, /* 0x0a */
330 [0x4] = 4, /* 0x14 */
331 [0x7] = 11, /* 0x37 */
332 [0xe] = 22, /* 0x6e */
333 [0xc] = 44, /* 0xdc , actually PBCC */
334 };
335 return cck_plcp2rate[plcp & 0xf];
336 }
337 return 0;
338 }
339
340 /*
341 * Covert 802.11 rate to PLCP signal.
342 */
343 uint8_t
344 ieee80211_rate2plcp(int rate, enum ieee80211_phytype type)
345 {
346 /* XXX ignore type for now since rates are unique */
347 switch (rate) {
348 /* OFDM rates (cf IEEE Std 802.11a-1999, pp. 14 Table 80) */
349 case 12: return 0xb;
350 case 18: return 0xf;
351 case 24: return 0xa;
352 case 36: return 0xe;
353 case 48: return 0x9;
354 case 72: return 0xd;
355 case 96: return 0x8;
356 case 108: return 0xc;
357 /* CCK rates (IEEE Std 802.11b-1999 page 15, subclause 18.2.3.3) */
358 case 2: return 10;
359 case 4: return 20;
360 case 11: return 55;
361 case 22: return 110;
362 /* IEEE Std 802.11g-2003 page 19, subclause 19.3.2.1 */
363 case 44: return 220;
364 }
365 return 0; /* XXX unsupported/unknown rate */
366 }
367
368 #define CCK_SIFS_TIME 10
369 #define CCK_PREAMBLE_BITS 144
370 #define CCK_PLCP_BITS 48
371
372 #define OFDM_SIFS_TIME 16
373 #define OFDM_PREAMBLE_TIME 20
374 #define OFDM_PLCP_BITS 22
375 #define OFDM_SYMBOL_TIME 4
376
377 #define OFDM_HALF_SIFS_TIME 32
378 #define OFDM_HALF_PREAMBLE_TIME 40
379 #define OFDM_HALF_PLCP_BITS 22
380 #define OFDM_HALF_SYMBOL_TIME 8
381
382 #define OFDM_QUARTER_SIFS_TIME 64
383 #define OFDM_QUARTER_PREAMBLE_TIME 80
384 #define OFDM_QUARTER_PLCP_BITS 22
385 #define OFDM_QUARTER_SYMBOL_TIME 16
386
387 #define TURBO_SIFS_TIME 8
388 #define TURBO_PREAMBLE_TIME 14
389 #define TURBO_PLCP_BITS 22
390 #define TURBO_SYMBOL_TIME 4
391
392 /*
393 * Compute the time to transmit a frame of length frameLen bytes
394 * using the specified rate, phy, and short preamble setting.
395 * SIFS is included.
396 */
397 uint16_t
398 ieee80211_compute_duration(const struct ieee80211_rate_table *rt,
399 uint32_t frameLen, uint16_t rate, int isShortPreamble)
400 {
401 uint8_t rix = rt->rateCodeToIndex[rate];
402 uint32_t bitsPerSymbol, numBits, numSymbols, phyTime, txTime;
403 uint32_t kbps;
404
405 KASSERT(rix != (uint8_t)-1, ("rate %d has no info", rate));
406 kbps = rt->info[rix].rateKbps;
407 if (kbps == 0) /* XXX bandaid for channel changes */
408 return 0;
409
410 switch (rt->info[rix].phy) {
411 case IEEE80211_T_CCK:
412 phyTime = CCK_PREAMBLE_BITS + CCK_PLCP_BITS;
413 if (isShortPreamble && rt->info[rix].shortPreamble)
414 phyTime >>= 1;
415 numBits = frameLen << 3;
416 txTime = CCK_SIFS_TIME + phyTime
417 + ((numBits * 1000)/kbps);
418 break;
419 case IEEE80211_T_OFDM:
420 bitsPerSymbol = (kbps * OFDM_SYMBOL_TIME) / 1000;
421 KASSERT(bitsPerSymbol != 0, ("full rate bps"));
422
423 numBits = OFDM_PLCP_BITS + (frameLen << 3);
424 numSymbols = howmany(numBits, bitsPerSymbol);
425 txTime = OFDM_SIFS_TIME
426 + OFDM_PREAMBLE_TIME
427 + (numSymbols * OFDM_SYMBOL_TIME);
428 break;
429 case IEEE80211_T_OFDM_HALF:
430 bitsPerSymbol = (kbps * OFDM_HALF_SYMBOL_TIME) / 1000;
431 KASSERT(bitsPerSymbol != 0, ("1/4 rate bps"));
432
433 numBits = OFDM_PLCP_BITS + (frameLen << 3);
434 numSymbols = howmany(numBits, bitsPerSymbol);
435 txTime = OFDM_HALF_SIFS_TIME
436 + OFDM_HALF_PREAMBLE_TIME
437 + (numSymbols * OFDM_HALF_SYMBOL_TIME);
438 break;
439 case IEEE80211_T_OFDM_QUARTER:
440 bitsPerSymbol = (kbps * OFDM_QUARTER_SYMBOL_TIME) / 1000;
441 KASSERT(bitsPerSymbol != 0, ("1/2 rate bps"));
442
443 numBits = OFDM_PLCP_BITS + (frameLen << 3);
444 numSymbols = howmany(numBits, bitsPerSymbol);
445 txTime = OFDM_QUARTER_SIFS_TIME
446 + OFDM_QUARTER_PREAMBLE_TIME
447 + (numSymbols * OFDM_QUARTER_SYMBOL_TIME);
448 break;
449 case IEEE80211_T_TURBO:
450 /* we still save OFDM rates in kbps - so double them */
451 bitsPerSymbol = ((kbps << 1) * TURBO_SYMBOL_TIME) / 1000;
452 KASSERT(bitsPerSymbol != 0, ("turbo bps"));
453
454 numBits = TURBO_PLCP_BITS + (frameLen << 3);
455 numSymbols = howmany(numBits, bitsPerSymbol);
456 txTime = TURBO_SIFS_TIME + TURBO_PREAMBLE_TIME
457 + (numSymbols * TURBO_SYMBOL_TIME);
458 break;
459 default:
460 panic("%s: unknown phy %u (rate %u)\n", __func__,
461 rt->info[rix].phy, rate);
462 break;
463 }
464 return txTime;
465 }
Cache object: 574efe3b7663bbe7804152143659668c
|