1 /*
2 * ng_btsocket.c
3 */
4
5 /*-
6 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
7 *
8 * Copyright (c) 2001-2002 Maksim Yevmenkin <m_evmenkin@yahoo.com>
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions and the following disclaimer.
16 * 2. Redistributions in binary form must reproduce the above copyright
17 * notice, this list of conditions and the following disclaimer in the
18 * documentation and/or other materials provided with the distribution.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
24 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 * SUCH DAMAGE.
31 *
32 * $Id: ng_btsocket.c,v 1.4 2003/09/14 23:29:06 max Exp $
33 * $FreeBSD$
34 */
35
36 #include <sys/param.h>
37 #include <sys/systm.h>
38 #include <sys/bitstring.h>
39 #include <sys/errno.h>
40 #include <sys/domain.h>
41 #include <sys/kernel.h>
42 #include <sys/lock.h>
43 #include <sys/mbuf.h>
44 #include <sys/mutex.h>
45 #include <sys/protosw.h>
46 #include <sys/socket.h>
47 #include <sys/socketvar.h>
48 #include <sys/sysctl.h>
49 #include <sys/taskqueue.h>
50
51 #include <net/vnet.h>
52
53 #include <netgraph/ng_message.h>
54 #include <netgraph/netgraph.h>
55 #include <netgraph/bluetooth/include/ng_bluetooth.h>
56 #include <netgraph/bluetooth/include/ng_hci.h>
57 #include <netgraph/bluetooth/include/ng_l2cap.h>
58 #include <netgraph/bluetooth/include/ng_btsocket.h>
59 #include <netgraph/bluetooth/include/ng_btsocket_hci_raw.h>
60 #include <netgraph/bluetooth/include/ng_btsocket_l2cap.h>
61 #include <netgraph/bluetooth/include/ng_btsocket_rfcomm.h>
62 #include <netgraph/bluetooth/include/ng_btsocket_sco.h>
63
64 static int ng_btsocket_modevent (module_t, int, void *);
65
66 /*
67 * Definitions of protocols supported in the BLUETOOTH domain
68 */
69
70 /* Bluetooth raw HCI sockets */
71 static struct protosw ng_btsocket_hci_raw_protosw = {
72 .pr_type = SOCK_RAW,
73 .pr_protocol = BLUETOOTH_PROTO_HCI,
74 .pr_flags = PR_ATOMIC|PR_ADDR,
75 .pr_ctloutput = ng_btsocket_hci_raw_ctloutput,
76 .pr_abort = ng_btsocket_hci_raw_abort,
77 .pr_attach = ng_btsocket_hci_raw_attach,
78 .pr_bind = ng_btsocket_hci_raw_bind,
79 .pr_connect = ng_btsocket_hci_raw_connect,
80 .pr_control = ng_btsocket_hci_raw_control,
81 .pr_detach = ng_btsocket_hci_raw_detach,
82 .pr_disconnect = ng_btsocket_hci_raw_disconnect,
83 .pr_peeraddr = ng_btsocket_hci_raw_peeraddr,
84 .pr_send = ng_btsocket_hci_raw_send,
85 .pr_sockaddr = ng_btsocket_hci_raw_sockaddr,
86 .pr_close = ng_btsocket_hci_raw_close,
87 };
88
89 /* Bluetooth raw L2CAP sockets */
90 static struct protosw ng_btsocket_l2cap_raw_protosw = {
91 .pr_type = SOCK_RAW,
92 .pr_protocol = BLUETOOTH_PROTO_L2CAP,
93 .pr_flags = PR_ATOMIC|PR_ADDR,
94 .pr_abort = ng_btsocket_l2cap_raw_abort,
95 .pr_attach = ng_btsocket_l2cap_raw_attach,
96 .pr_bind = ng_btsocket_l2cap_raw_bind,
97 .pr_connect = ng_btsocket_l2cap_raw_connect,
98 .pr_control = ng_btsocket_l2cap_raw_control,
99 .pr_detach = ng_btsocket_l2cap_raw_detach,
100 .pr_disconnect = ng_btsocket_l2cap_raw_disconnect,
101 .pr_peeraddr = ng_btsocket_l2cap_raw_peeraddr,
102 .pr_send = ng_btsocket_l2cap_raw_send,
103 .pr_sockaddr = ng_btsocket_l2cap_raw_sockaddr,
104 .pr_close = ng_btsocket_l2cap_raw_close,
105 };
106
107 /* Bluetooth SEQPACKET L2CAP sockets */
108 static struct protosw ng_btsocket_l2cap_protosw = {
109 .pr_type = SOCK_SEQPACKET,
110 .pr_protocol = BLUETOOTH_PROTO_L2CAP,
111 .pr_flags = PR_ATOMIC|PR_CONNREQUIRED,
112 .pr_ctloutput = ng_btsocket_l2cap_ctloutput,
113 .pr_abort = ng_btsocket_l2cap_abort,
114 .pr_accept = ng_btsocket_l2cap_accept,
115 .pr_attach = ng_btsocket_l2cap_attach,
116 .pr_bind = ng_btsocket_l2cap_bind,
117 .pr_connect = ng_btsocket_l2cap_connect,
118 .pr_control = ng_btsocket_l2cap_control,
119 .pr_detach = ng_btsocket_l2cap_detach,
120 .pr_disconnect = ng_btsocket_l2cap_disconnect,
121 .pr_listen = ng_btsocket_l2cap_listen,
122 .pr_peeraddr = ng_btsocket_l2cap_peeraddr,
123 .pr_send = ng_btsocket_l2cap_send,
124 .pr_sockaddr = ng_btsocket_l2cap_sockaddr,
125 .pr_close = ng_btsocket_l2cap_close,
126 };
127
128 /* Bluetooth STREAM RFCOMM sockets */
129 static struct protosw ng_btsocket_rfcomm_protosw = {
130 .pr_type = SOCK_STREAM,
131 .pr_protocol = BLUETOOTH_PROTO_RFCOMM,
132 .pr_flags = PR_CONNREQUIRED,
133 .pr_ctloutput = ng_btsocket_rfcomm_ctloutput,
134 .pr_abort = ng_btsocket_rfcomm_abort,
135 .pr_accept = ng_btsocket_rfcomm_accept,
136 .pr_attach = ng_btsocket_rfcomm_attach,
137 .pr_bind = ng_btsocket_rfcomm_bind,
138 .pr_connect = ng_btsocket_rfcomm_connect,
139 .pr_control = ng_btsocket_rfcomm_control,
140 .pr_detach = ng_btsocket_rfcomm_detach,
141 .pr_disconnect = ng_btsocket_rfcomm_disconnect,
142 .pr_listen = ng_btsocket_rfcomm_listen,
143 .pr_peeraddr = ng_btsocket_rfcomm_peeraddr,
144 .pr_send = ng_btsocket_rfcomm_send,
145 .pr_sockaddr = ng_btsocket_rfcomm_sockaddr,
146 .pr_close = ng_btsocket_rfcomm_close,
147 };
148
149 /* Bluetooth SEQPACKET SCO sockets */
150 static struct protosw ng_btsocket_sco_protosw = {
151 .pr_type = SOCK_SEQPACKET,
152 .pr_protocol = BLUETOOTH_PROTO_SCO,
153 .pr_flags = PR_ATOMIC|PR_CONNREQUIRED,
154 .pr_ctloutput = ng_btsocket_sco_ctloutput,
155 .pr_abort = ng_btsocket_sco_abort,
156 .pr_accept = ng_btsocket_sco_accept,
157 .pr_attach = ng_btsocket_sco_attach,
158 .pr_bind = ng_btsocket_sco_bind,
159 .pr_connect = ng_btsocket_sco_connect,
160 .pr_control = ng_btsocket_sco_control,
161 .pr_detach = ng_btsocket_sco_detach,
162 .pr_disconnect = ng_btsocket_sco_disconnect,
163 .pr_listen = ng_btsocket_sco_listen,
164 .pr_peeraddr = ng_btsocket_sco_peeraddr,
165 .pr_send = ng_btsocket_sco_send,
166 .pr_sockaddr = ng_btsocket_sco_sockaddr,
167 .pr_close = ng_btsocket_sco_close,
168 };
169
170 /*
171 * BLUETOOTH domain
172 */
173
174 static struct domain ng_btsocket_domain = {
175 .dom_family = AF_BLUETOOTH,
176 .dom_name = "bluetooth",
177 .dom_nprotosw = 5,
178 .dom_protosw = {
179 &ng_btsocket_hci_raw_protosw,
180 &ng_btsocket_l2cap_raw_protosw,
181 &ng_btsocket_l2cap_protosw,
182 &ng_btsocket_rfcomm_protosw,
183 &ng_btsocket_sco_protosw,
184 },
185 };
186
187 /*
188 * Socket sysctl tree
189 */
190
191 SYSCTL_NODE(_net_bluetooth_hci, OID_AUTO, sockets,
192 CTLFLAG_RW | CTLFLAG_MPSAFE, 0,
193 "Bluetooth HCI sockets family");
194 SYSCTL_NODE(_net_bluetooth_l2cap, OID_AUTO, sockets,
195 CTLFLAG_RW | CTLFLAG_MPSAFE, 0,
196 "Bluetooth L2CAP sockets family");
197 SYSCTL_NODE(_net_bluetooth_rfcomm, OID_AUTO, sockets,
198 CTLFLAG_RW | CTLFLAG_MPSAFE, 0,
199 "Bluetooth RFCOMM sockets family");
200 SYSCTL_NODE(_net_bluetooth_sco, OID_AUTO, sockets,
201 CTLFLAG_RW | CTLFLAG_MPSAFE, 0,
202 "Bluetooth SCO sockets family");
203
204 /*
205 * Module
206 */
207
208 static moduledata_t ng_btsocket_mod = {
209 "ng_btsocket",
210 ng_btsocket_modevent,
211 NULL
212 };
213
214 DECLARE_MODULE(ng_btsocket, ng_btsocket_mod, SI_SUB_PROTO_DOMAIN,
215 SI_ORDER_ANY);
216 MODULE_VERSION(ng_btsocket, NG_BLUETOOTH_VERSION);
217 MODULE_DEPEND(ng_btsocket, ng_bluetooth, NG_BLUETOOTH_VERSION,
218 NG_BLUETOOTH_VERSION, NG_BLUETOOTH_VERSION);
219 MODULE_DEPEND(ng_btsocket, netgraph, NG_ABI_VERSION,
220 NG_ABI_VERSION, NG_ABI_VERSION);
221
222 /*
223 * Handle loading and unloading for this node type.
224 * This is to handle auxiliary linkages (e.g protocol domain addition).
225 */
226
227 static int
228 ng_btsocket_modevent(module_t mod, int event, void *data)
229 {
230 int error = 0;
231
232 switch (event) {
233 case MOD_LOAD:
234 break;
235
236 case MOD_UNLOAD:
237 /* XXX can't unload protocol domain yet */
238 error = EBUSY;
239 break;
240
241 default:
242 error = EOPNOTSUPP;
243 break;
244 }
245
246 return (error);
247 } /* ng_btsocket_modevent */
248
249 DOMAIN_SET(ng_btsocket_);
Cache object: 3216f8c03f1458c61f50f49d07d77fa1
|