FreeBSD/Linux Kernel Cross Reference
sys/netinet/ip_fw.h
1 /*-
2 * Copyright (c) 2002-2009 Luigi Rizzo, Universita` di Pisa
3 *
4 * Redistribution and use in source and binary forms, with or without
5 * modification, are permitted provided that the following conditions
6 * are met:
7 * 1. Redistributions of source code must retain the above copyright
8 * notice, this list of conditions and the following disclaimer.
9 * 2. Redistributions in binary form must reproduce the above copyright
10 * notice, this list of conditions and the following disclaimer in the
11 * documentation and/or other materials provided with the distribution.
12 *
13 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
14 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
15 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
16 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
17 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
18 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
19 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
20 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
21 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
22 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
23 * SUCH DAMAGE.
24 *
25 * $FreeBSD: releng/10.1/sys/netinet/ip_fw.h 248552 2013-03-20 10:35:33Z melifaro $
26 */
27
28 #ifndef _IPFW2_H
29 #define _IPFW2_H
30
31 /*
32 * The default rule number. By the design of ip_fw, the default rule
33 * is the last one, so its number can also serve as the highest number
34 * allowed for a rule. The ip_fw code relies on both meanings of this
35 * constant.
36 */
37 #define IPFW_DEFAULT_RULE 65535
38
39 /*
40 * Default number of ipfw tables.
41 */
42 #define IPFW_TABLES_MAX 65535
43 #define IPFW_TABLES_DEFAULT 128
44
45 /*
46 * Most commands (queue, pipe, tag, untag, limit...) can have a 16-bit
47 * argument between 1 and 65534. The value 0 is unused, the value
48 * 65535 (IP_FW_TABLEARG) is used to represent 'tablearg', i.e. the
49 * can be 1..65534, or 65535 to indicate the use of a 'tablearg'
50 * result of the most recent table() lookup.
51 * Note that 16bit is only a historical limit, resulting from
52 * the use of a 16-bit fields for that value. In reality, we can have
53 * 2^32 pipes, queues, tag values and so on, and use 0 as a tablearg.
54 */
55 #define IPFW_ARG_MIN 1
56 #define IPFW_ARG_MAX 65534
57 #define IP_FW_TABLEARG 65535 /* XXX should use 0 */
58
59 /*
60 * Number of entries in the call stack of the call/return commands.
61 * Call stack currently is an uint16_t array with rule numbers.
62 */
63 #define IPFW_CALLSTACK_SIZE 16
64
65 /* IP_FW3 header/opcodes */
66 typedef struct _ip_fw3_opheader {
67 uint16_t opcode; /* Operation opcode */
68 uint16_t reserved[3]; /* Align to 64-bit boundary */
69 } ip_fw3_opheader;
70
71
72 /* IPFW extented tables support */
73 #define IP_FW_TABLE_XADD 86 /* add entry */
74 #define IP_FW_TABLE_XDEL 87 /* delete entry */
75 #define IP_FW_TABLE_XGETSIZE 88 /* get table size */
76 #define IP_FW_TABLE_XLIST 89 /* list table contents */
77
78 /*
79 * The kernel representation of ipfw rules is made of a list of
80 * 'instructions' (for all practical purposes equivalent to BPF
81 * instructions), which specify which fields of the packet
82 * (or its metadata) should be analysed.
83 *
84 * Each instruction is stored in a structure which begins with
85 * "ipfw_insn", and can contain extra fields depending on the
86 * instruction type (listed below).
87 * Note that the code is written so that individual instructions
88 * have a size which is a multiple of 32 bits. This means that, if
89 * such structures contain pointers or other 64-bit entities,
90 * (there is just one instance now) they may end up unaligned on
91 * 64-bit architectures, so the must be handled with care.
92 *
93 * "enum ipfw_opcodes" are the opcodes supported. We can have up
94 * to 256 different opcodes. When adding new opcodes, they should
95 * be appended to the end of the opcode list before O_LAST_OPCODE,
96 * this will prevent the ABI from being broken, otherwise users
97 * will have to recompile ipfw(8) when they update the kernel.
98 */
99
100 enum ipfw_opcodes { /* arguments (4 byte each) */
101 O_NOP,
102
103 O_IP_SRC, /* u32 = IP */
104 O_IP_SRC_MASK, /* ip = IP/mask */
105 O_IP_SRC_ME, /* none */
106 O_IP_SRC_SET, /* u32=base, arg1=len, bitmap */
107
108 O_IP_DST, /* u32 = IP */
109 O_IP_DST_MASK, /* ip = IP/mask */
110 O_IP_DST_ME, /* none */
111 O_IP_DST_SET, /* u32=base, arg1=len, bitmap */
112
113 O_IP_SRCPORT, /* (n)port list:mask 4 byte ea */
114 O_IP_DSTPORT, /* (n)port list:mask 4 byte ea */
115 O_PROTO, /* arg1=protocol */
116
117 O_MACADDR2, /* 2 mac addr:mask */
118 O_MAC_TYPE, /* same as srcport */
119
120 O_LAYER2, /* none */
121 O_IN, /* none */
122 O_FRAG, /* none */
123
124 O_RECV, /* none */
125 O_XMIT, /* none */
126 O_VIA, /* none */
127
128 O_IPOPT, /* arg1 = 2*u8 bitmap */
129 O_IPLEN, /* arg1 = len */
130 O_IPID, /* arg1 = id */
131
132 O_IPTOS, /* arg1 = id */
133 O_IPPRECEDENCE, /* arg1 = precedence << 5 */
134 O_IPTTL, /* arg1 = TTL */
135
136 O_IPVER, /* arg1 = version */
137 O_UID, /* u32 = id */
138 O_GID, /* u32 = id */
139 O_ESTAB, /* none (tcp established) */
140 O_TCPFLAGS, /* arg1 = 2*u8 bitmap */
141 O_TCPWIN, /* arg1 = desired win */
142 O_TCPSEQ, /* u32 = desired seq. */
143 O_TCPACK, /* u32 = desired seq. */
144 O_ICMPTYPE, /* u32 = icmp bitmap */
145 O_TCPOPTS, /* arg1 = 2*u8 bitmap */
146
147 O_VERREVPATH, /* none */
148 O_VERSRCREACH, /* none */
149
150 O_PROBE_STATE, /* none */
151 O_KEEP_STATE, /* none */
152 O_LIMIT, /* ipfw_insn_limit */
153 O_LIMIT_PARENT, /* dyn_type, not an opcode. */
154
155 /*
156 * These are really 'actions'.
157 */
158
159 O_LOG, /* ipfw_insn_log */
160 O_PROB, /* u32 = match probability */
161
162 O_CHECK_STATE, /* none */
163 O_ACCEPT, /* none */
164 O_DENY, /* none */
165 O_REJECT, /* arg1=icmp arg (same as deny) */
166 O_COUNT, /* none */
167 O_SKIPTO, /* arg1=next rule number */
168 O_PIPE, /* arg1=pipe number */
169 O_QUEUE, /* arg1=queue number */
170 O_DIVERT, /* arg1=port number */
171 O_TEE, /* arg1=port number */
172 O_FORWARD_IP, /* fwd sockaddr */
173 O_FORWARD_MAC, /* fwd mac */
174 O_NAT, /* nope */
175 O_REASS, /* none */
176
177 /*
178 * More opcodes.
179 */
180 O_IPSEC, /* has ipsec history */
181 O_IP_SRC_LOOKUP, /* arg1=table number, u32=value */
182 O_IP_DST_LOOKUP, /* arg1=table number, u32=value */
183 O_ANTISPOOF, /* none */
184 O_JAIL, /* u32 = id */
185 O_ALTQ, /* u32 = altq classif. qid */
186 O_DIVERTED, /* arg1=bitmap (1:loop, 2:out) */
187 O_TCPDATALEN, /* arg1 = tcp data len */
188 O_IP6_SRC, /* address without mask */
189 O_IP6_SRC_ME, /* my addresses */
190 O_IP6_SRC_MASK, /* address with the mask */
191 O_IP6_DST,
192 O_IP6_DST_ME,
193 O_IP6_DST_MASK,
194 O_FLOW6ID, /* for flow id tag in the ipv6 pkt */
195 O_ICMP6TYPE, /* icmp6 packet type filtering */
196 O_EXT_HDR, /* filtering for ipv6 extension header */
197 O_IP6,
198
199 /*
200 * actions for ng_ipfw
201 */
202 O_NETGRAPH, /* send to ng_ipfw */
203 O_NGTEE, /* copy to ng_ipfw */
204
205 O_IP4,
206
207 O_UNREACH6, /* arg1=icmpv6 code arg (deny) */
208
209 O_TAG, /* arg1=tag number */
210 O_TAGGED, /* arg1=tag number */
211
212 O_SETFIB, /* arg1=FIB number */
213 O_FIB, /* arg1=FIB desired fib number */
214
215 O_SOCKARG, /* socket argument */
216
217 O_CALLRETURN, /* arg1=called rule number */
218
219 O_FORWARD_IP6, /* fwd sockaddr_in6 */
220
221 O_DSCP, /* 2 u32 = DSCP mask */
222 O_SETDSCP, /* arg1=DSCP value */
223
224 O_LAST_OPCODE /* not an opcode! */
225 };
226
227
228 /*
229 * The extension header are filtered only for presence using a bit
230 * vector with a flag for each header.
231 */
232 #define EXT_FRAGMENT 0x1
233 #define EXT_HOPOPTS 0x2
234 #define EXT_ROUTING 0x4
235 #define EXT_AH 0x8
236 #define EXT_ESP 0x10
237 #define EXT_DSTOPTS 0x20
238 #define EXT_RTHDR0 0x40
239 #define EXT_RTHDR2 0x80
240
241 /*
242 * Template for instructions.
243 *
244 * ipfw_insn is used for all instructions which require no operands,
245 * a single 16-bit value (arg1), or a couple of 8-bit values.
246 *
247 * For other instructions which require different/larger arguments
248 * we have derived structures, ipfw_insn_*.
249 *
250 * The size of the instruction (in 32-bit words) is in the low
251 * 6 bits of "len". The 2 remaining bits are used to implement
252 * NOT and OR on individual instructions. Given a type, you can
253 * compute the length to be put in "len" using F_INSN_SIZE(t)
254 *
255 * F_NOT negates the match result of the instruction.
256 *
257 * F_OR is used to build or blocks. By default, instructions
258 * are evaluated as part of a logical AND. An "or" block
259 * { X or Y or Z } contains F_OR set in all but the last
260 * instruction of the block. A match will cause the code
261 * to skip past the last instruction of the block.
262 *
263 * NOTA BENE: in a couple of places we assume that
264 * sizeof(ipfw_insn) == sizeof(u_int32_t)
265 * this needs to be fixed.
266 *
267 */
268 typedef struct _ipfw_insn { /* template for instructions */
269 u_int8_t opcode;
270 u_int8_t len; /* number of 32-bit words */
271 #define F_NOT 0x80
272 #define F_OR 0x40
273 #define F_LEN_MASK 0x3f
274 #define F_LEN(cmd) ((cmd)->len & F_LEN_MASK)
275
276 u_int16_t arg1;
277 } ipfw_insn;
278
279 /*
280 * The F_INSN_SIZE(type) computes the size, in 4-byte words, of
281 * a given type.
282 */
283 #define F_INSN_SIZE(t) ((sizeof (t))/sizeof(u_int32_t))
284
285 /*
286 * This is used to store an array of 16-bit entries (ports etc.)
287 */
288 typedef struct _ipfw_insn_u16 {
289 ipfw_insn o;
290 u_int16_t ports[2]; /* there may be more */
291 } ipfw_insn_u16;
292
293 /*
294 * This is used to store an array of 32-bit entries
295 * (uid, single IPv4 addresses etc.)
296 */
297 typedef struct _ipfw_insn_u32 {
298 ipfw_insn o;
299 u_int32_t d[1]; /* one or more */
300 } ipfw_insn_u32;
301
302 /*
303 * This is used to store IP addr-mask pairs.
304 */
305 typedef struct _ipfw_insn_ip {
306 ipfw_insn o;
307 struct in_addr addr;
308 struct in_addr mask;
309 } ipfw_insn_ip;
310
311 /*
312 * This is used to forward to a given address (ip).
313 */
314 typedef struct _ipfw_insn_sa {
315 ipfw_insn o;
316 struct sockaddr_in sa;
317 } ipfw_insn_sa;
318
319 /*
320 * This is used to forward to a given address (ipv6).
321 */
322 typedef struct _ipfw_insn_sa6 {
323 ipfw_insn o;
324 struct sockaddr_in6 sa;
325 } ipfw_insn_sa6;
326
327 /*
328 * This is used for MAC addr-mask pairs.
329 */
330 typedef struct _ipfw_insn_mac {
331 ipfw_insn o;
332 u_char addr[12]; /* dst[6] + src[6] */
333 u_char mask[12]; /* dst[6] + src[6] */
334 } ipfw_insn_mac;
335
336 /*
337 * This is used for interface match rules (recv xx, xmit xx).
338 */
339 typedef struct _ipfw_insn_if {
340 ipfw_insn o;
341 union {
342 struct in_addr ip;
343 int glob;
344 } p;
345 char name[IFNAMSIZ];
346 } ipfw_insn_if;
347
348 /*
349 * This is used for storing an altq queue id number.
350 */
351 typedef struct _ipfw_insn_altq {
352 ipfw_insn o;
353 u_int32_t qid;
354 } ipfw_insn_altq;
355
356 /*
357 * This is used for limit rules.
358 */
359 typedef struct _ipfw_insn_limit {
360 ipfw_insn o;
361 u_int8_t _pad;
362 u_int8_t limit_mask; /* combination of DYN_* below */
363 #define DYN_SRC_ADDR 0x1
364 #define DYN_SRC_PORT 0x2
365 #define DYN_DST_ADDR 0x4
366 #define DYN_DST_PORT 0x8
367
368 u_int16_t conn_limit;
369 } ipfw_insn_limit;
370
371 /*
372 * This is used for log instructions.
373 */
374 typedef struct _ipfw_insn_log {
375 ipfw_insn o;
376 u_int32_t max_log; /* how many do we log -- 0 = all */
377 u_int32_t log_left; /* how many left to log */
378 } ipfw_insn_log;
379
380 /*
381 * Data structures required by both ipfw(8) and ipfw(4) but not part of the
382 * management API are protected by IPFW_INTERNAL.
383 */
384 #ifdef IPFW_INTERNAL
385 /* Server pool support (LSNAT). */
386 struct cfg_spool {
387 LIST_ENTRY(cfg_spool) _next; /* chain of spool instances */
388 struct in_addr addr;
389 u_short port;
390 };
391 #endif
392
393 /* Redirect modes id. */
394 #define REDIR_ADDR 0x01
395 #define REDIR_PORT 0x02
396 #define REDIR_PROTO 0x04
397
398 #ifdef IPFW_INTERNAL
399 /* Nat redirect configuration. */
400 struct cfg_redir {
401 LIST_ENTRY(cfg_redir) _next; /* chain of redir instances */
402 u_int16_t mode; /* type of redirect mode */
403 struct in_addr laddr; /* local ip address */
404 struct in_addr paddr; /* public ip address */
405 struct in_addr raddr; /* remote ip address */
406 u_short lport; /* local port */
407 u_short pport; /* public port */
408 u_short rport; /* remote port */
409 u_short pport_cnt; /* number of public ports */
410 u_short rport_cnt; /* number of remote ports */
411 int proto; /* protocol: tcp/udp */
412 struct alias_link **alink;
413 /* num of entry in spool chain */
414 u_int16_t spool_cnt;
415 /* chain of spool instances */
416 LIST_HEAD(spool_chain, cfg_spool) spool_chain;
417 };
418 #endif
419
420 #ifdef IPFW_INTERNAL
421 /* Nat configuration data struct. */
422 struct cfg_nat {
423 /* chain of nat instances */
424 LIST_ENTRY(cfg_nat) _next;
425 int id; /* nat id */
426 struct in_addr ip; /* nat ip address */
427 char if_name[IF_NAMESIZE]; /* interface name */
428 int mode; /* aliasing mode */
429 struct libalias *lib; /* libalias instance */
430 /* number of entry in spool chain */
431 int redir_cnt;
432 /* chain of redir instances */
433 LIST_HEAD(redir_chain, cfg_redir) redir_chain;
434 };
435 #endif
436
437 #define SOF_NAT sizeof(struct cfg_nat)
438 #define SOF_REDIR sizeof(struct cfg_redir)
439 #define SOF_SPOOL sizeof(struct cfg_spool)
440
441 /* Nat command. */
442 typedef struct _ipfw_insn_nat {
443 ipfw_insn o;
444 struct cfg_nat *nat;
445 } ipfw_insn_nat;
446
447 /* Apply ipv6 mask on ipv6 addr */
448 #define APPLY_MASK(addr,mask) \
449 (addr)->__u6_addr.__u6_addr32[0] &= (mask)->__u6_addr.__u6_addr32[0]; \
450 (addr)->__u6_addr.__u6_addr32[1] &= (mask)->__u6_addr.__u6_addr32[1]; \
451 (addr)->__u6_addr.__u6_addr32[2] &= (mask)->__u6_addr.__u6_addr32[2]; \
452 (addr)->__u6_addr.__u6_addr32[3] &= (mask)->__u6_addr.__u6_addr32[3];
453
454 /* Structure for ipv6 */
455 typedef struct _ipfw_insn_ip6 {
456 ipfw_insn o;
457 struct in6_addr addr6;
458 struct in6_addr mask6;
459 } ipfw_insn_ip6;
460
461 /* Used to support icmp6 types */
462 typedef struct _ipfw_insn_icmp6 {
463 ipfw_insn o;
464 uint32_t d[7]; /* XXX This number si related to the netinet/icmp6.h
465 * define ICMP6_MAXTYPE
466 * as follows: n = ICMP6_MAXTYPE/32 + 1
467 * Actually is 203
468 */
469 } ipfw_insn_icmp6;
470
471 /*
472 * Here we have the structure representing an ipfw rule.
473 *
474 * It starts with a general area (with link fields and counters)
475 * followed by an array of one or more instructions, which the code
476 * accesses as an array of 32-bit values.
477 *
478 * Given a rule pointer r:
479 *
480 * r->cmd is the start of the first instruction.
481 * ACTION_PTR(r) is the start of the first action (things to do
482 * once a rule matched).
483 *
484 * When assembling instruction, remember the following:
485 *
486 * + if a rule has a "keep-state" (or "limit") option, then the
487 * first instruction (at r->cmd) MUST BE an O_PROBE_STATE
488 * + if a rule has a "log" option, then the first action
489 * (at ACTION_PTR(r)) MUST be O_LOG
490 * + if a rule has an "altq" option, it comes after "log"
491 * + if a rule has an O_TAG option, it comes after "log" and "altq"
492 *
493 * NOTE: we use a simple linked list of rules because we never need
494 * to delete a rule without scanning the list. We do not use
495 * queue(3) macros for portability and readability.
496 */
497
498 struct ip_fw {
499 struct ip_fw *x_next; /* linked list of rules */
500 struct ip_fw *next_rule; /* ptr to next [skipto] rule */
501 /* 'next_rule' is used to pass up 'set_disable' status */
502
503 uint16_t act_ofs; /* offset of action in 32-bit units */
504 uint16_t cmd_len; /* # of 32-bit words in cmd */
505 uint16_t rulenum; /* rule number */
506 uint8_t set; /* rule set (0..31) */
507 #define RESVD_SET 31 /* set for default and persistent rules */
508 uint8_t _pad; /* padding */
509 uint32_t id; /* rule id */
510
511 /* These fields are present in all rules. */
512 uint64_t pcnt; /* Packet counter */
513 uint64_t bcnt; /* Byte counter */
514 uint32_t timestamp; /* tv_sec of last match */
515
516 ipfw_insn cmd[1]; /* storage for commands */
517 };
518
519 #define ACTION_PTR(rule) \
520 (ipfw_insn *)( (u_int32_t *)((rule)->cmd) + ((rule)->act_ofs) )
521
522 #define RULESIZE(rule) (sizeof(struct ip_fw) + \
523 ((struct ip_fw *)(rule))->cmd_len * 4 - 4)
524
525 #if 1 // should be moved to in.h
526 /*
527 * This structure is used as a flow mask and a flow id for various
528 * parts of the code.
529 * addr_type is used in userland and kernel to mark the address type.
530 * fib is used in the kernel to record the fib in use.
531 * _flags is used in the kernel to store tcp flags for dynamic rules.
532 */
533 struct ipfw_flow_id {
534 uint32_t dst_ip;
535 uint32_t src_ip;
536 uint16_t dst_port;
537 uint16_t src_port;
538 uint8_t fib;
539 uint8_t proto;
540 uint8_t _flags; /* protocol-specific flags */
541 uint8_t addr_type; /* 4=ip4, 6=ip6, 1=ether ? */
542 struct in6_addr dst_ip6;
543 struct in6_addr src_ip6;
544 uint32_t flow_id6;
545 uint32_t extra; /* queue/pipe or frag_id */
546 };
547 #endif
548
549 #define IS_IP6_FLOW_ID(id) ((id)->addr_type == 6)
550
551 /*
552 * Dynamic ipfw rule.
553 */
554 typedef struct _ipfw_dyn_rule ipfw_dyn_rule;
555
556 struct _ipfw_dyn_rule {
557 ipfw_dyn_rule *next; /* linked list of rules. */
558 struct ip_fw *rule; /* pointer to rule */
559 /* 'rule' is used to pass up the rule number (from the parent) */
560
561 ipfw_dyn_rule *parent; /* pointer to parent rule */
562 u_int64_t pcnt; /* packet match counter */
563 u_int64_t bcnt; /* byte match counter */
564 struct ipfw_flow_id id; /* (masked) flow id */
565 u_int32_t expire; /* expire time */
566 u_int32_t bucket; /* which bucket in hash table */
567 u_int32_t state; /* state of this rule (typically a
568 * combination of TCP flags)
569 */
570 u_int32_t ack_fwd; /* most recent ACKs in forward */
571 u_int32_t ack_rev; /* and reverse directions (used */
572 /* to generate keepalives) */
573 u_int16_t dyn_type; /* rule type */
574 u_int16_t count; /* refcount */
575 };
576
577 /*
578 * Definitions for IP option names.
579 */
580 #define IP_FW_IPOPT_LSRR 0x01
581 #define IP_FW_IPOPT_SSRR 0x02
582 #define IP_FW_IPOPT_RR 0x04
583 #define IP_FW_IPOPT_TS 0x08
584
585 /*
586 * Definitions for TCP option names.
587 */
588 #define IP_FW_TCPOPT_MSS 0x01
589 #define IP_FW_TCPOPT_WINDOW 0x02
590 #define IP_FW_TCPOPT_SACK 0x04
591 #define IP_FW_TCPOPT_TS 0x08
592 #define IP_FW_TCPOPT_CC 0x10
593
594 #define ICMP_REJECT_RST 0x100 /* fake ICMP code (send a TCP RST) */
595 #define ICMP6_UNREACH_RST 0x100 /* fake ICMPv6 code (send a TCP RST) */
596
597 /*
598 * These are used for lookup tables.
599 */
600
601 #define IPFW_TABLE_CIDR 1 /* Table for holding IPv4/IPv6 prefixes */
602 #define IPFW_TABLE_INTERFACE 2 /* Table for holding interface names */
603 #define IPFW_TABLE_MAXTYPE 2 /* Maximum valid number */
604
605 typedef struct _ipfw_table_entry {
606 in_addr_t addr; /* network address */
607 u_int32_t value; /* value */
608 u_int16_t tbl; /* table number */
609 u_int8_t masklen; /* mask length */
610 } ipfw_table_entry;
611
612 typedef struct _ipfw_table_xentry {
613 uint16_t len; /* Total entry length */
614 uint8_t type; /* entry type */
615 uint8_t masklen; /* mask length */
616 uint16_t tbl; /* table number */
617 uint32_t value; /* value */
618 union {
619 /* Longest field needs to be aligned by 4-byte boundary */
620 struct in6_addr addr6; /* IPv6 address */
621 char iface[IF_NAMESIZE]; /* interface name */
622 } k;
623 } ipfw_table_xentry;
624
625 typedef struct _ipfw_table {
626 u_int32_t size; /* size of entries in bytes */
627 u_int32_t cnt; /* # of entries */
628 u_int16_t tbl; /* table number */
629 ipfw_table_entry ent[0]; /* entries */
630 } ipfw_table;
631
632 typedef struct _ipfw_xtable {
633 ip_fw3_opheader opheader; /* eXtended tables are controlled via IP_FW3 */
634 uint32_t size; /* size of entries in bytes */
635 uint32_t cnt; /* # of entries */
636 uint16_t tbl; /* table number */
637 uint8_t type; /* table type */
638 ipfw_table_xentry xent[0]; /* entries */
639 } ipfw_xtable;
640
641 #endif /* _IPFW2_H */
Cache object: e1e709443fff57a43ebdef3e395f3f90
|