FreeBSD/Linux Kernel Cross Reference
sys/netinet/ip_fw.h
1 /*-
2 * Copyright (c) 2002 Luigi Rizzo, Universita` di Pisa
3 *
4 * Redistribution and use in source and binary forms, with or without
5 * modification, are permitted provided that the following conditions
6 * are met:
7 * 1. Redistributions of source code must retain the above copyright
8 * notice, this list of conditions and the following disclaimer.
9 * 2. Redistributions in binary form must reproduce the above copyright
10 * notice, this list of conditions and the following disclaimer in the
11 * documentation and/or other materials provided with the distribution.
12 *
13 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
14 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
15 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
16 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
17 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
18 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
19 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
20 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
21 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
22 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
23 * SUCH DAMAGE.
24 *
25 * $FreeBSD: releng/7.4/sys/netinet/ip_fw.h 200123 2009-12-05 13:53:41Z luigi $
26 */
27
28 #ifndef _IPFW2_H
29 #define _IPFW2_H
30
31 /*
32 * The default rule number. By the design of ip_fw, the default rule
33 * is the last one, so its number can also serve as the highest number
34 * allowed for a rule. The ip_fw code relies on both meanings of this
35 * constant.
36 */
37 #define IPFW_DEFAULT_RULE 65535
38
39 /*
40 * The kernel representation of ipfw rules is made of a list of
41 * 'instructions' (for all practical purposes equivalent to BPF
42 * instructions), which specify which fields of the packet
43 * (or its metadata) should be analysed.
44 *
45 * Each instruction is stored in a structure which begins with
46 * "ipfw_insn", and can contain extra fields depending on the
47 * instruction type (listed below).
48 * Note that the code is written so that individual instructions
49 * have a size which is a multiple of 32 bits. This means that, if
50 * such structures contain pointers or other 64-bit entities,
51 * (there is just one instance now) they may end up unaligned on
52 * 64-bit architectures, so the must be handled with care.
53 *
54 * "enum ipfw_opcodes" are the opcodes supported. We can have up
55 * to 256 different opcodes. When adding new opcodes, they should
56 * be appended to the end of the opcode list before O_LAST_OPCODE,
57 * this will prevent the ABI from being broken, otherwise users
58 * will have to recompile ipfw(8) when they update the kernel.
59 */
60
61 enum ipfw_opcodes { /* arguments (4 byte each) */
62 O_NOP,
63
64 O_IP_SRC, /* u32 = IP */
65 O_IP_SRC_MASK, /* ip = IP/mask */
66 O_IP_SRC_ME, /* none */
67 O_IP_SRC_SET, /* u32=base, arg1=len, bitmap */
68
69 O_IP_DST, /* u32 = IP */
70 O_IP_DST_MASK, /* ip = IP/mask */
71 O_IP_DST_ME, /* none */
72 O_IP_DST_SET, /* u32=base, arg1=len, bitmap */
73
74 O_IP_SRCPORT, /* (n)port list:mask 4 byte ea */
75 O_IP_DSTPORT, /* (n)port list:mask 4 byte ea */
76 O_PROTO, /* arg1=protocol */
77
78 O_MACADDR2, /* 2 mac addr:mask */
79 O_MAC_TYPE, /* same as srcport */
80
81 O_LAYER2, /* none */
82 O_IN, /* none */
83 O_FRAG, /* none */
84
85 O_RECV, /* none */
86 O_XMIT, /* none */
87 O_VIA, /* none */
88
89 O_IPOPT, /* arg1 = 2*u8 bitmap */
90 O_IPLEN, /* arg1 = len */
91 O_IPID, /* arg1 = id */
92
93 O_IPTOS, /* arg1 = id */
94 O_IPPRECEDENCE, /* arg1 = precedence << 5 */
95 O_IPTTL, /* arg1 = TTL */
96
97 O_IPVER, /* arg1 = version */
98 O_UID, /* u32 = id */
99 O_GID, /* u32 = id */
100 O_ESTAB, /* none (tcp established) */
101 O_TCPFLAGS, /* arg1 = 2*u8 bitmap */
102 O_TCPWIN, /* arg1 = desired win */
103 O_TCPSEQ, /* u32 = desired seq. */
104 O_TCPACK, /* u32 = desired seq. */
105 O_ICMPTYPE, /* u32 = icmp bitmap */
106 O_TCPOPTS, /* arg1 = 2*u8 bitmap */
107
108 O_VERREVPATH, /* none */
109 O_VERSRCREACH, /* none */
110
111 O_PROBE_STATE, /* none */
112 O_KEEP_STATE, /* none */
113 O_LIMIT, /* ipfw_insn_limit */
114 O_LIMIT_PARENT, /* dyn_type, not an opcode. */
115
116 /*
117 * These are really 'actions'.
118 */
119
120 O_LOG, /* ipfw_insn_log */
121 O_PROB, /* u32 = match probability */
122
123 O_CHECK_STATE, /* none */
124 O_ACCEPT, /* none */
125 O_DENY, /* none */
126 O_REJECT, /* arg1=icmp arg (same as deny) */
127 O_COUNT, /* none */
128 O_SKIPTO, /* arg1=next rule number */
129 O_PIPE, /* arg1=pipe number */
130 O_QUEUE, /* arg1=queue number */
131 O_DIVERT, /* arg1=port number */
132 O_TEE, /* arg1=port number */
133 O_FORWARD_IP, /* fwd sockaddr */
134 O_FORWARD_MAC, /* fwd mac */
135 O_NAT, /* nope */
136
137 /*
138 * More opcodes.
139 */
140 O_IPSEC, /* has ipsec history */
141 O_IP_SRC_LOOKUP, /* arg1=table number, u32=value */
142 O_IP_DST_LOOKUP, /* arg1=table number, u32=value */
143 O_ANTISPOOF, /* none */
144 O_JAIL, /* u32 = id */
145 O_ALTQ, /* u32 = altq classif. qid */
146 O_DIVERTED, /* arg1=bitmap (1:loop, 2:out) */
147 O_TCPDATALEN, /* arg1 = tcp data len */
148 O_IP6_SRC, /* address without mask */
149 O_IP6_SRC_ME, /* my addresses */
150 O_IP6_SRC_MASK, /* address with the mask */
151 O_IP6_DST,
152 O_IP6_DST_ME,
153 O_IP6_DST_MASK,
154 O_FLOW6ID, /* for flow id tag in the ipv6 pkt */
155 O_ICMP6TYPE, /* icmp6 packet type filtering */
156 O_EXT_HDR, /* filtering for ipv6 extension header */
157 O_IP6,
158
159 /*
160 * actions for ng_ipfw
161 */
162 O_NETGRAPH, /* send to ng_ipfw */
163 O_NGTEE, /* copy to ng_ipfw */
164
165 O_IP4,
166
167 O_UNREACH6, /* arg1=icmpv6 code arg (deny) */
168
169 O_TAG, /* arg1=tag number */
170 O_TAGGED, /* arg1=tag number */
171
172 O_SETFIB, /* arg1=FIB number */
173 O_FIB, /* arg1=FIB desired fib number */
174
175 O_LAST_OPCODE /* not an opcode! */
176 };
177
178 /*
179 * The extension header are filtered only for presence using a bit
180 * vector with a flag for each header.
181 */
182 #define EXT_FRAGMENT 0x1
183 #define EXT_HOPOPTS 0x2
184 #define EXT_ROUTING 0x4
185 #define EXT_AH 0x8
186 #define EXT_ESP 0x10
187 #define EXT_DSTOPTS 0x20
188 #define EXT_RTHDR0 0x40
189 #define EXT_RTHDR2 0x80
190
191 /*
192 * Template for instructions.
193 *
194 * ipfw_insn is used for all instructions which require no operands,
195 * a single 16-bit value (arg1), or a couple of 8-bit values.
196 *
197 * For other instructions which require different/larger arguments
198 * we have derived structures, ipfw_insn_*.
199 *
200 * The size of the instruction (in 32-bit words) is in the low
201 * 6 bits of "len". The 2 remaining bits are used to implement
202 * NOT and OR on individual instructions. Given a type, you can
203 * compute the length to be put in "len" using F_INSN_SIZE(t)
204 *
205 * F_NOT negates the match result of the instruction.
206 *
207 * F_OR is used to build or blocks. By default, instructions
208 * are evaluated as part of a logical AND. An "or" block
209 * { X or Y or Z } contains F_OR set in all but the last
210 * instruction of the block. A match will cause the code
211 * to skip past the last instruction of the block.
212 *
213 * NOTA BENE: in a couple of places we assume that
214 * sizeof(ipfw_insn) == sizeof(u_int32_t)
215 * this needs to be fixed.
216 *
217 */
218 typedef struct _ipfw_insn { /* template for instructions */
219 u_int8_t opcode;
220 u_int8_t len; /* number of 32-bit words */
221 #define F_NOT 0x80
222 #define F_OR 0x40
223 #define F_LEN_MASK 0x3f
224 #define F_LEN(cmd) ((cmd)->len & F_LEN_MASK)
225
226 u_int16_t arg1;
227 } ipfw_insn;
228
229 /*
230 * The F_INSN_SIZE(type) computes the size, in 4-byte words, of
231 * a given type.
232 */
233 #define F_INSN_SIZE(t) ((sizeof (t))/sizeof(u_int32_t))
234
235 #define MTAG_IPFW 1148380143 /* IPFW-tagged cookie */
236
237 /*
238 * This is used to store an array of 16-bit entries (ports etc.)
239 */
240 typedef struct _ipfw_insn_u16 {
241 ipfw_insn o;
242 u_int16_t ports[2]; /* there may be more */
243 } ipfw_insn_u16;
244
245 /*
246 * This is used to store an array of 32-bit entries
247 * (uid, single IPv4 addresses etc.)
248 */
249 typedef struct _ipfw_insn_u32 {
250 ipfw_insn o;
251 u_int32_t d[1]; /* one or more */
252 } ipfw_insn_u32;
253
254 /*
255 * This is used to store IP addr-mask pairs.
256 */
257 typedef struct _ipfw_insn_ip {
258 ipfw_insn o;
259 struct in_addr addr;
260 struct in_addr mask;
261 } ipfw_insn_ip;
262
263 /*
264 * This is used to forward to a given address (ip).
265 */
266 typedef struct _ipfw_insn_sa {
267 ipfw_insn o;
268 struct sockaddr_in sa;
269 } ipfw_insn_sa;
270
271 /*
272 * This is used for MAC addr-mask pairs.
273 */
274 typedef struct _ipfw_insn_mac {
275 ipfw_insn o;
276 u_char addr[12]; /* dst[6] + src[6] */
277 u_char mask[12]; /* dst[6] + src[6] */
278 } ipfw_insn_mac;
279
280 /*
281 * This is used for interface match rules (recv xx, xmit xx).
282 */
283 typedef struct _ipfw_insn_if {
284 ipfw_insn o;
285 union {
286 struct in_addr ip;
287 int glob;
288 } p;
289 char name[IFNAMSIZ];
290 } ipfw_insn_if;
291
292 /*
293 * This is used for storing an altq queue id number.
294 */
295 typedef struct _ipfw_insn_altq {
296 ipfw_insn o;
297 u_int32_t qid;
298 } ipfw_insn_altq;
299
300 /*
301 * This is used for limit rules.
302 */
303 typedef struct _ipfw_insn_limit {
304 ipfw_insn o;
305 u_int8_t _pad;
306 u_int8_t limit_mask; /* combination of DYN_* below */
307 #define DYN_SRC_ADDR 0x1
308 #define DYN_SRC_PORT 0x2
309 #define DYN_DST_ADDR 0x4
310 #define DYN_DST_PORT 0x8
311
312 u_int16_t conn_limit;
313 } ipfw_insn_limit;
314
315 /*
316 * This is used for log instructions.
317 */
318 typedef struct _ipfw_insn_log {
319 ipfw_insn o;
320 u_int32_t max_log; /* how many do we log -- 0 = all */
321 u_int32_t log_left; /* how many left to log */
322 } ipfw_insn_log;
323
324 /*
325 * Data structures required by both ipfw(8) and ipfw(4) but not part of the
326 * management API are protected by IPFW_INTERNAL.
327 */
328 #ifdef IPFW_INTERNAL
329 /* Server pool support (LSNAT). */
330 struct cfg_spool {
331 LIST_ENTRY(cfg_spool) _next; /* chain of spool instances */
332 struct in_addr addr;
333 u_short port;
334 };
335 #endif
336
337 /* Redirect modes id. */
338 #define REDIR_ADDR 0x01
339 #define REDIR_PORT 0x02
340 #define REDIR_PROTO 0x04
341
342 #ifdef IPFW_INTERNAL
343 /* Nat redirect configuration. */
344 struct cfg_redir {
345 LIST_ENTRY(cfg_redir) _next; /* chain of redir instances */
346 u_int16_t mode; /* type of redirect mode */
347 struct in_addr laddr; /* local ip address */
348 struct in_addr paddr; /* public ip address */
349 struct in_addr raddr; /* remote ip address */
350 u_short lport; /* local port */
351 u_short pport; /* public port */
352 u_short rport; /* remote port */
353 u_short pport_cnt; /* number of public ports */
354 u_short rport_cnt; /* number of remote ports */
355 int proto; /* protocol: tcp/udp */
356 struct alias_link **alink;
357 /* num of entry in spool chain */
358 u_int16_t spool_cnt;
359 /* chain of spool instances */
360 LIST_HEAD(spool_chain, cfg_spool) spool_chain;
361 };
362 #endif
363
364 #define NAT_BUF_LEN 1024
365
366 #ifdef IPFW_INTERNAL
367 /* Nat configuration data struct. */
368 struct cfg_nat {
369 /* chain of nat instances */
370 LIST_ENTRY(cfg_nat) _next;
371 int id; /* nat id */
372 struct in_addr ip; /* nat ip address */
373 char if_name[IF_NAMESIZE]; /* interface name */
374 int mode; /* aliasing mode */
375 struct libalias *lib; /* libalias instance */
376 /* number of entry in spool chain */
377 int redir_cnt;
378 /* chain of redir instances */
379 LIST_HEAD(redir_chain, cfg_redir) redir_chain;
380 };
381 #endif
382
383 #define SOF_NAT sizeof(struct cfg_nat)
384 #define SOF_REDIR sizeof(struct cfg_redir)
385 #define SOF_SPOOL sizeof(struct cfg_spool)
386
387 /* Nat command. */
388 typedef struct _ipfw_insn_nat {
389 ipfw_insn o;
390 struct cfg_nat *nat;
391 } ipfw_insn_nat;
392
393 /* Apply ipv6 mask on ipv6 addr */
394 #define APPLY_MASK(addr,mask) \
395 (addr)->__u6_addr.__u6_addr32[0] &= (mask)->__u6_addr.__u6_addr32[0]; \
396 (addr)->__u6_addr.__u6_addr32[1] &= (mask)->__u6_addr.__u6_addr32[1]; \
397 (addr)->__u6_addr.__u6_addr32[2] &= (mask)->__u6_addr.__u6_addr32[2]; \
398 (addr)->__u6_addr.__u6_addr32[3] &= (mask)->__u6_addr.__u6_addr32[3];
399
400 /* Structure for ipv6 */
401 typedef struct _ipfw_insn_ip6 {
402 ipfw_insn o;
403 struct in6_addr addr6;
404 struct in6_addr mask6;
405 } ipfw_insn_ip6;
406
407 /* Used to support icmp6 types */
408 typedef struct _ipfw_insn_icmp6 {
409 ipfw_insn o;
410 uint32_t d[7]; /* XXX This number si related to the netinet/icmp6.h
411 * define ICMP6_MAXTYPE
412 * as follows: n = ICMP6_MAXTYPE/32 + 1
413 * Actually is 203
414 */
415 } ipfw_insn_icmp6;
416
417 /*
418 * Here we have the structure representing an ipfw rule.
419 *
420 * It starts with a general area (with link fields and counters)
421 * followed by an array of one or more instructions, which the code
422 * accesses as an array of 32-bit values.
423 *
424 * Given a rule pointer r:
425 *
426 * r->cmd is the start of the first instruction.
427 * ACTION_PTR(r) is the start of the first action (things to do
428 * once a rule matched).
429 *
430 * When assembling instruction, remember the following:
431 *
432 * + if a rule has a "keep-state" (or "limit") option, then the
433 * first instruction (at r->cmd) MUST BE an O_PROBE_STATE
434 * + if a rule has a "log" option, then the first action
435 * (at ACTION_PTR(r)) MUST be O_LOG
436 * + if a rule has an "altq" option, it comes after "log"
437 * + if a rule has an O_TAG option, it comes after "log" and "altq"
438 *
439 * NOTE: we use a simple linked list of rules because we never need
440 * to delete a rule without scanning the list. We do not use
441 * queue(3) macros for portability and readability.
442 */
443
444 struct ip_fw {
445 struct ip_fw *next; /* linked list of rules */
446 struct ip_fw *next_rule; /* ptr to next [skipto] rule */
447 /* 'next_rule' is used to pass up 'set_disable' status */
448
449 u_int16_t act_ofs; /* offset of action in 32-bit units */
450 u_int16_t cmd_len; /* # of 32-bit words in cmd */
451 u_int16_t rulenum; /* rule number */
452 u_int8_t set; /* rule set (0..31) */
453 #define RESVD_SET 31 /* set for default and persistent rules */
454 u_int8_t _pad; /* padding */
455
456 /* These fields are present in all rules. */
457 u_int64_t pcnt; /* Packet counter */
458 u_int64_t bcnt; /* Byte counter */
459 u_int32_t timestamp; /* tv_sec of last match */
460
461 ipfw_insn cmd[1]; /* storage for commands */
462 };
463
464 #define ACTION_PTR(rule) \
465 (ipfw_insn *)( (u_int32_t *)((rule)->cmd) + ((rule)->act_ofs) )
466
467 #define RULESIZE(rule) (sizeof(struct ip_fw) + \
468 ((struct ip_fw *)(rule))->cmd_len * 4 - 4)
469
470 /*
471 * This structure is used as a flow mask and a flow id for various
472 * parts of the code.
473 */
474 struct ipfw_flow_id {
475 u_int32_t dst_ip;
476 u_int32_t src_ip;
477 u_int16_t dst_port;
478 u_int16_t src_port;
479 u_int8_t fib;
480 u_int8_t proto;
481 u_int8_t flags; /* protocol-specific flags */
482 uint8_t addr_type; /* 4 = ipv4, 6 = ipv6, 1=ether ? */
483 struct in6_addr dst_ip6; /* could also store MAC addr! */
484 struct in6_addr src_ip6;
485 u_int32_t flow_id6;
486 u_int32_t frag_id6;
487 };
488
489 #define IS_IP6_FLOW_ID(id) ((id)->addr_type == 6)
490
491 /*
492 * Dynamic ipfw rule.
493 */
494 typedef struct _ipfw_dyn_rule ipfw_dyn_rule;
495
496 struct _ipfw_dyn_rule {
497 ipfw_dyn_rule *next; /* linked list of rules. */
498 struct ip_fw *rule; /* pointer to rule */
499 /* 'rule' is used to pass up the rule number (from the parent) */
500
501 ipfw_dyn_rule *parent; /* pointer to parent rule */
502 u_int64_t pcnt; /* packet match counter */
503 u_int64_t bcnt; /* byte match counter */
504 struct ipfw_flow_id id; /* (masked) flow id */
505 u_int32_t expire; /* expire time */
506 u_int32_t bucket; /* which bucket in hash table */
507 u_int32_t state; /* state of this rule (typically a
508 * combination of TCP flags)
509 */
510 u_int32_t ack_fwd; /* most recent ACKs in forward */
511 u_int32_t ack_rev; /* and reverse directions (used */
512 /* to generate keepalives) */
513 u_int16_t dyn_type; /* rule type */
514 u_int16_t count; /* refcount */
515 };
516
517 /*
518 * Definitions for IP option names.
519 */
520 #define IP_FW_IPOPT_LSRR 0x01
521 #define IP_FW_IPOPT_SSRR 0x02
522 #define IP_FW_IPOPT_RR 0x04
523 #define IP_FW_IPOPT_TS 0x08
524
525 /*
526 * Definitions for TCP option names.
527 */
528 #define IP_FW_TCPOPT_MSS 0x01
529 #define IP_FW_TCPOPT_WINDOW 0x02
530 #define IP_FW_TCPOPT_SACK 0x04
531 #define IP_FW_TCPOPT_TS 0x08
532 #define IP_FW_TCPOPT_CC 0x10
533
534 #define ICMP_REJECT_RST 0x100 /* fake ICMP code (send a TCP RST) */
535 #define ICMP6_UNREACH_RST 0x100 /* fake ICMPv6 code (send a TCP RST) */
536
537 /*
538 * These are used for lookup tables.
539 */
540 typedef struct _ipfw_table_entry {
541 in_addr_t addr; /* network address */
542 u_int32_t value; /* value */
543 u_int16_t tbl; /* table number */
544 u_int8_t masklen; /* mask length */
545 } ipfw_table_entry;
546
547 typedef struct _ipfw_table {
548 u_int32_t size; /* size of entries in bytes */
549 u_int32_t cnt; /* # of entries */
550 u_int16_t tbl; /* table number */
551 ipfw_table_entry ent[0]; /* entries */
552 } ipfw_table;
553
554 #define IP_FW_TABLEARG 65535
555
556 /*
557 * Main firewall chains definitions and global var's definitions.
558 */
559 #ifdef _KERNEL
560
561 /* Return values from ipfw_chk() */
562 enum {
563 IP_FW_PASS = 0,
564 IP_FW_DENY,
565 IP_FW_DIVERT,
566 IP_FW_TEE,
567 IP_FW_DUMMYNET,
568 IP_FW_NETGRAPH,
569 IP_FW_NGTEE,
570 IP_FW_NAT,
571 };
572
573 /* flags for divert mtag */
574 #define IP_FW_DIVERT_LOOPBACK_FLAG 0x00080000
575 #define IP_FW_DIVERT_OUTPUT_FLAG 0x00100000
576
577 /*
578 * Structure for collecting parameters to dummynet for ip6_output forwarding
579 */
580 struct _ip6dn_args {
581 struct ip6_pktopts *opt_or;
582 struct route_in6 ro_or;
583 int flags_or;
584 struct ip6_moptions *im6o_or;
585 struct ifnet *origifp_or;
586 struct ifnet *ifp_or;
587 struct sockaddr_in6 dst_or;
588 u_long mtu_or;
589 struct route_in6 ro_pmtu_or;
590 };
591
592 /*
593 * Arguments for calling ipfw_chk() and dummynet_io(). We put them
594 * all into a structure because this way it is easier and more
595 * efficient to pass variables around and extend the interface.
596 */
597 struct ip_fw_args {
598 struct mbuf *m; /* the mbuf chain */
599 struct ifnet *oif; /* output interface */
600 struct sockaddr_in *next_hop; /* forward address */
601 struct ip_fw *rule; /* matching rule */
602 struct ether_header *eh; /* for bridged packets */
603
604 struct ipfw_flow_id f_id; /* grabbed from IP header */
605 u_int32_t cookie; /* a cookie depending on rule action */
606 struct inpcb *inp;
607
608 struct _ip6dn_args dummypar; /* dummynet->ip6_output */
609 struct sockaddr_in hopstore; /* store here if cannot use a pointer */
610 };
611
612 /*
613 * Function definitions.
614 */
615
616 /* Firewall hooks */
617 struct sockopt;
618 struct dn_flow_set;
619
620 int ipfw_check_in(void *, struct mbuf **, struct ifnet *, int, struct inpcb *inp);
621 int ipfw_check_out(void *, struct mbuf **, struct ifnet *, int, struct inpcb *inp);
622
623 int ipfw_chk(struct ip_fw_args *);
624
625 int ipfw_init(void);
626 void ipfw_destroy(void);
627
628 typedef int ip_fw_ctl_t(struct sockopt *);
629 extern ip_fw_ctl_t *ip_fw_ctl_ptr;
630 extern int fw_one_pass;
631 extern int fw_enable;
632 #ifdef INET6
633 extern int fw6_enable;
634 #endif
635
636 /* For kernel ipfw_ether and ipfw_bridge. */
637 typedef int ip_fw_chk_t(struct ip_fw_args *args);
638 extern ip_fw_chk_t *ip_fw_chk_ptr;
639 #define IPFW_LOADED (ip_fw_chk_ptr != NULL)
640
641 #ifdef IPFW_INTERNAL
642
643 #define IPFW_TABLES_MAX 128
644 struct ip_fw_chain {
645 struct ip_fw *rules; /* list of rules */
646 struct ip_fw *reap; /* list of rules to reap */
647 LIST_HEAD(, cfg_nat) nat; /* list of nat entries */
648 struct radix_node_head *tables[IPFW_TABLES_MAX];
649 struct rwlock rwmtx;
650 };
651 #define IPFW_LOCK_INIT(_chain) \
652 rw_init(&(_chain)->rwmtx, "IPFW static rules")
653 #define IPFW_LOCK_DESTROY(_chain) rw_destroy(&(_chain)->rwmtx)
654 #define IPFW_WLOCK_ASSERT(_chain) rw_assert(&(_chain)->rwmtx, RA_WLOCKED)
655
656 #define IPFW_RLOCK(p) rw_rlock(&(p)->rwmtx)
657 #define IPFW_RUNLOCK(p) rw_runlock(&(p)->rwmtx)
658 #define IPFW_WLOCK(p) rw_wlock(&(p)->rwmtx)
659 #define IPFW_WUNLOCK(p) rw_wunlock(&(p)->rwmtx)
660
661 #define LOOKUP_NAT(l, i, p) do { \
662 LIST_FOREACH((p), &(l.nat), _next) { \
663 if ((p)->id == (i)) { \
664 break; \
665 } \
666 } \
667 } while (0)
668
669 typedef int ipfw_nat_t(struct ip_fw_args *, struct cfg_nat *, struct mbuf *);
670 typedef int ipfw_nat_cfg_t(struct sockopt *);
671 #endif
672
673 #endif /* _KERNEL */
674 #endif /* _IPFW2_H */
Cache object: c1c1760035b486174f82a75d1ded54da
|