1 /* $FreeBSD: releng/6.4/sys/netinet6/udp6_output.c 152060 2005-11-04 20:26:16Z ume $ */
2 /* $KAME: udp6_output.c,v 1.31 2001/05/21 16:39:15 jinmei Exp $ */
3
4 /*-
5 * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the name of the project nor the names of its contributors
17 * may be used to endorse or promote products derived from this software
18 * without specific prior written permission.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
24 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 * SUCH DAMAGE.
31 */
32
33 /*-
34 * Copyright (c) 1982, 1986, 1989, 1993
35 * The Regents of the University of California. All rights reserved.
36 *
37 * Redistribution and use in source and binary forms, with or without
38 * modification, are permitted provided that the following conditions
39 * are met:
40 * 1. Redistributions of source code must retain the above copyright
41 * notice, this list of conditions and the following disclaimer.
42 * 2. Redistributions in binary form must reproduce the above copyright
43 * notice, this list of conditions and the following disclaimer in the
44 * documentation and/or other materials provided with the distribution.
45 * 4. Neither the name of the University nor the names of its contributors
46 * may be used to endorse or promote products derived from this software
47 * without specific prior written permission.
48 *
49 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
50 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
51 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
52 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
53 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
54 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
55 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
56 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
57 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
58 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
59 * SUCH DAMAGE.
60 *
61 * @(#)udp_var.h 8.1 (Berkeley) 6/10/93
62 */
63
64 #include "opt_ipsec.h"
65 #include "opt_inet.h"
66 #include "opt_inet6.h"
67
68 #include <sys/param.h>
69 #include <sys/proc.h>
70 #include <sys/malloc.h>
71 #include <sys/mbuf.h>
72 #include <sys/protosw.h>
73 #include <sys/socket.h>
74 #include <sys/socketvar.h>
75 #include <sys/sysctl.h>
76 #include <sys/errno.h>
77 #include <sys/stat.h>
78 #include <sys/systm.h>
79 #include <sys/syslog.h>
80
81 #include <net/if.h>
82 #include <net/route.h>
83 #include <net/if_types.h>
84
85 #include <netinet/in.h>
86 #include <netinet/in_var.h>
87 #include <netinet/in_systm.h>
88 #include <netinet/ip.h>
89 #include <netinet/ip_var.h>
90 #include <netinet/in_pcb.h>
91 #include <netinet/udp.h>
92 #include <netinet/udp_var.h>
93 #include <netinet/ip6.h>
94 #include <netinet6/ip6_var.h>
95 #include <netinet6/in6_pcb.h>
96 #include <netinet6/udp6_var.h>
97 #include <netinet/icmp6.h>
98 #include <netinet6/ip6protosw.h>
99 #include <netinet6/scope6_var.h>
100
101 #ifdef IPSEC
102 #include <netinet6/ipsec.h>
103 #ifdef INET6
104 #include <netinet6/ipsec6.h>
105 #endif
106 #endif /* IPSEC */
107
108 #include <net/net_osdep.h>
109
110 /*
111 * UDP protocol inplementation.
112 * Per RFC 768, August, 1980.
113 */
114
115 #define in6pcb inpcb
116 #define udp6stat udpstat
117 #define udp6s_opackets udps_opackets
118
119 int
120 udp6_output(in6p, m, addr6, control, td)
121 struct in6pcb *in6p;
122 struct mbuf *m;
123 struct mbuf *control;
124 struct sockaddr *addr6;
125 struct thread *td;
126 {
127 u_int32_t ulen = m->m_pkthdr.len;
128 u_int32_t plen = sizeof(struct udphdr) + ulen;
129 struct ip6_hdr *ip6;
130 struct udphdr *udp6;
131 struct in6_addr *laddr, *faddr;
132 struct sockaddr_in6 *sin6 = NULL;
133 struct ifnet *oifp = NULL;
134 int scope_ambiguous = 0;
135 u_short fport;
136 int error = 0;
137 struct ip6_pktopts *optp, opt;
138 int priv;
139 int af = AF_INET6, hlen = sizeof(struct ip6_hdr);
140 int flags;
141 struct sockaddr_in6 tmp;
142
143 priv = 0;
144 if (td && !suser(td))
145 priv = 1;
146
147 if (addr6) {
148 /* addr6 has been validated in udp6_send(). */
149 sin6 = (struct sockaddr_in6 *)addr6;
150
151 /* protect *sin6 from overwrites */
152 tmp = *sin6;
153 sin6 = &tmp;
154
155 /*
156 * Application should provide a proper zone ID or the use of
157 * default zone IDs should be enabled. Unfortunately, some
158 * applications do not behave as it should, so we need a
159 * workaround. Even if an appropriate ID is not determined,
160 * we'll see if we can determine the outgoing interface. If we
161 * can, determine the zone ID based on the interface below.
162 */
163 if (sin6->sin6_scope_id == 0 && !ip6_use_defzone)
164 scope_ambiguous = 1;
165 if ((error = sa6_embedscope(sin6, ip6_use_defzone)) != 0)
166 return (error);
167 }
168
169 if (control) {
170 if ((error = ip6_setpktopts(control, &opt,
171 in6p->in6p_outputopts, priv, IPPROTO_UDP)) != 0)
172 goto release;
173 optp = &opt;
174 } else
175 optp = in6p->in6p_outputopts;
176
177 if (sin6) {
178 faddr = &sin6->sin6_addr;
179
180 /*
181 * IPv4 version of udp_output calls in_pcbconnect in this case,
182 * which needs splnet and affects performance.
183 * Since we saw no essential reason for calling in_pcbconnect,
184 * we get rid of such kind of logic, and call in6_selectsrc
185 * and in6_pcbsetport in order to fill in the local address
186 * and the local port.
187 */
188 if (sin6->sin6_port == 0) {
189 error = EADDRNOTAVAIL;
190 goto release;
191 }
192
193 if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
194 /* how about ::ffff:0.0.0.0 case? */
195 error = EISCONN;
196 goto release;
197 }
198
199 fport = sin6->sin6_port; /* allow 0 port */
200
201 if (IN6_IS_ADDR_V4MAPPED(faddr)) {
202 if ((in6p->in6p_flags & IN6P_IPV6_V6ONLY)) {
203 /*
204 * I believe we should explicitly discard the
205 * packet when mapped addresses are disabled,
206 * rather than send the packet as an IPv6 one.
207 * If we chose the latter approach, the packet
208 * might be sent out on the wire based on the
209 * default route, the situation which we'd
210 * probably want to avoid.
211 * (20010421 jinmei@kame.net)
212 */
213 error = EINVAL;
214 goto release;
215 }
216 if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_laddr) &&
217 !IN6_IS_ADDR_V4MAPPED(&in6p->in6p_laddr)) {
218 /*
219 * when remote addr is an IPv4-mapped address,
220 * local addr should not be an IPv6 address,
221 * since you cannot determine how to map IPv6
222 * source address to IPv4.
223 */
224 error = EINVAL;
225 goto release;
226 }
227
228 af = AF_INET;
229 }
230
231 if (!IN6_IS_ADDR_V4MAPPED(faddr)) {
232 laddr = in6_selectsrc(sin6, optp, in6p->in6p_moptions,
233 NULL, &in6p->in6p_laddr, &oifp, &error);
234 if (oifp && scope_ambiguous &&
235 (error = in6_setscope(&sin6->sin6_addr,
236 oifp, NULL))) {
237 goto release;
238 }
239 } else
240 laddr = &in6p->in6p_laddr; /* XXX */
241 if (laddr == NULL) {
242 if (error == 0)
243 error = EADDRNOTAVAIL;
244 goto release;
245 }
246 if (in6p->in6p_lport == 0 &&
247 (error = in6_pcbsetport(laddr, in6p, td->td_ucred)) != 0)
248 goto release;
249 } else {
250 if (IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
251 error = ENOTCONN;
252 goto release;
253 }
254 if (IN6_IS_ADDR_V4MAPPED(&in6p->in6p_faddr)) {
255 if ((in6p->in6p_flags & IN6P_IPV6_V6ONLY)) {
256 /*
257 * XXX: this case would happen when the
258 * application sets the V6ONLY flag after
259 * connecting the foreign address.
260 * Such applications should be fixed,
261 * so we bark here.
262 */
263 log(LOG_INFO, "udp6_output: IPV6_V6ONLY "
264 "option was set for a connected socket\n");
265 error = EINVAL;
266 goto release;
267 } else
268 af = AF_INET;
269 }
270 laddr = &in6p->in6p_laddr;
271 faddr = &in6p->in6p_faddr;
272 fport = in6p->in6p_fport;
273 }
274
275 if (af == AF_INET)
276 hlen = sizeof(struct ip);
277
278 /*
279 * Calculate data length and get a mbuf
280 * for UDP and IP6 headers.
281 */
282 M_PREPEND(m, hlen + sizeof(struct udphdr), M_DONTWAIT);
283 if (m == 0) {
284 error = ENOBUFS;
285 goto release;
286 }
287
288 /*
289 * Stuff checksum and output datagram.
290 */
291 udp6 = (struct udphdr *)(mtod(m, caddr_t) + hlen);
292 udp6->uh_sport = in6p->in6p_lport; /* lport is always set in the PCB */
293 udp6->uh_dport = fport;
294 if (plen <= 0xffff)
295 udp6->uh_ulen = htons((u_short)plen);
296 else
297 udp6->uh_ulen = 0;
298 udp6->uh_sum = 0;
299
300 switch (af) {
301 case AF_INET6:
302 ip6 = mtod(m, struct ip6_hdr *);
303 ip6->ip6_flow = in6p->in6p_flowinfo & IPV6_FLOWINFO_MASK;
304 ip6->ip6_vfc &= ~IPV6_VERSION_MASK;
305 ip6->ip6_vfc |= IPV6_VERSION;
306 #if 0 /* ip6_plen will be filled in ip6_output. */
307 ip6->ip6_plen = htons((u_short)plen);
308 #endif
309 ip6->ip6_nxt = IPPROTO_UDP;
310 ip6->ip6_hlim = in6_selecthlim(in6p, NULL);
311 ip6->ip6_src = *laddr;
312 ip6->ip6_dst = *faddr;
313
314 if ((udp6->uh_sum = in6_cksum(m, IPPROTO_UDP,
315 sizeof(struct ip6_hdr), plen)) == 0) {
316 udp6->uh_sum = 0xffff;
317 }
318
319 flags = 0;
320
321 udp6stat.udp6s_opackets++;
322 error = ip6_output(m, optp, NULL, flags, in6p->in6p_moptions,
323 NULL, in6p);
324 break;
325 case AF_INET:
326 error = EAFNOSUPPORT;
327 goto release;
328 }
329 goto releaseopt;
330
331 release:
332 m_freem(m);
333
334 releaseopt:
335 if (control) {
336 ip6_clearpktopts(&opt, -1);
337 m_freem(control);
338 }
339 return (error);
340 }
Cache object: 7213ebee6914b19162c3ba5175e057ea
|