FreeBSD/Linux Kernel Cross Reference
sys/pci/cy_pci.c
1 /*
2 * Copyright (c) 1996, David Greenman
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 * notice unmodified, this list of conditions, and the following
10 * disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25 * SUCH DAMAGE.
26 */
27
28 /*
29 * Cyclades Y PCI serial interface driver
30 */
31
32 #include <sys/cdefs.h>
33 __FBSDID("$FreeBSD: releng/5.2/sys/pci/cy_pci.c 123105 2003-12-02 12:47:08Z bde $");
34
35 #include "opt_cy_pci_fastintr.h"
36
37 #include <sys/param.h>
38 #include <sys/systm.h>
39 #include <sys/kernel.h>
40 #include <sys/bus.h>
41
42 #include <machine/bus.h>
43 #include <sys/rman.h>
44 #include <machine/resource.h>
45
46 #include <vm/vm.h>
47 #include <vm/pmap.h>
48
49 #include <dev/pci/pcivar.h>
50
51 #define CY_PCI_BASE_ADDR0 0x10
52 #define CY_PCI_BASE_ADDR1 0x14
53 #define CY_PCI_BASE_ADDR2 0x18
54
55 #define CY_PLX_9050_ICS 0x4c
56 #define CY_PLX_9060_ICS 0x68
57 #define CY_PLX_9050_ICS_IENABLE 0x040
58 #define CY_PLX_9050_ICS_LOCAL_IENABLE 0x001
59 #define CY_PLX_9050_ICS_LOCAL_IPOLARITY 0x002
60 #define CY_PLX_9060_ICS_IENABLE 0x100
61 #define CY_PLX_9060_ICS_LOCAL_IENABLE 0x800
62
63 /* Cyclom-Y Custom Register for PLX ID. */
64 #define PLX_VER 0x3400
65 #define PLX_9050 0x0b
66 #define PLX_9060 0x0c
67 #define PLX_9080 0x0d
68
69 void *cyattach_common(u_char volatile *iobase, int cy_align);
70 driver_intr_t cyintr;
71
72 static int cy_pci_attach(device_t dev);
73 static int cy_pci_probe(device_t dev);
74
75 static device_method_t cy_pci_methods[] = {
76 /* Device interface. */
77 DEVMETHOD(device_probe, cy_pci_probe),
78 DEVMETHOD(device_attach, cy_pci_attach),
79
80 { 0, 0 }
81 };
82
83 static driver_t cy_pci_driver = {
84 "cy",
85 cy_pci_methods,
86 0,
87 };
88
89 static devclass_t cy_devclass;
90
91 DRIVER_MODULE(cy, pci, cy_pci_driver, cy_devclass, 0, 0);
92 MODULE_DEPEND(cy, pci, 1, 1, 1);
93
94 static int
95 cy_pci_probe(dev)
96 device_t dev;
97 {
98 u_int32_t device_id;
99
100 device_id = pci_get_devid(dev);
101 device_id &= ~0x00060000;
102 if (device_id != 0x0100120e && device_id != 0x0101120e)
103 return (ENXIO);
104 device_set_desc(dev, "Cyclades Cyclom-Y Serial Adapter");
105 return (0);
106 }
107
108 static int
109 cy_pci_attach(dev)
110 device_t dev;
111 {
112 struct resource *ioport_res, *irq_res, *mem_res;
113 void *irq_cookie, *vaddr, *vsc;
114 u_int32_t ioport;
115 int irq_setup, ioport_rid, irq_rid, mem_rid;
116 u_char plx_ver;
117
118 ioport_res = NULL;
119 irq_res = NULL;
120 mem_res = NULL;
121
122 ioport_rid = CY_PCI_BASE_ADDR1;
123 ioport_res = bus_alloc_resource(dev, SYS_RES_IOPORT, &ioport_rid,
124 0ul, ~0ul, 0ul, RF_ACTIVE);
125 if (ioport_res == NULL) {
126 device_printf(dev, "ioport resource allocation failed\n");
127 goto fail;
128 }
129 ioport = rman_get_start(ioport_res);
130
131 mem_rid = CY_PCI_BASE_ADDR2;
132 mem_res = bus_alloc_resource(dev, SYS_RES_MEMORY, &mem_rid,
133 0ul, ~0ul, 0ul, RF_ACTIVE);
134 if (mem_res == NULL) {
135 device_printf(dev, "memory resource allocation failed\n");
136 goto fail;
137 }
138 vaddr = rman_get_virtual(mem_res);
139
140 vsc = cyattach_common(vaddr, 1);
141 if (vsc == NULL) {
142 device_printf(dev, "no ports found!\n");
143 goto fail;
144 }
145
146 irq_rid = 0;
147 irq_res = bus_alloc_resource(dev, SYS_RES_IRQ, &irq_rid, 0ul, ~0ul, 0ul,
148 RF_SHAREABLE | RF_ACTIVE);
149 if (irq_res == NULL) {
150 device_printf(dev, "interrupt resource allocation failed\n");
151 goto fail;
152 }
153 #ifdef CY_PCI_FASTINTR
154 irq_setup = bus_setup_intr(dev, irq_res, INTR_TYPE_TTY | INTR_FAST,
155 cyintr, vsc, &irq_cookie);
156 #else
157 irq_setup = ENXIO;
158 #endif
159 if (irq_setup != 0)
160 irq_setup = bus_setup_intr(dev, irq_res, INTR_TYPE_TTY,
161 cyintr, vsc, &irq_cookie);
162 if (irq_setup != 0) {
163 device_printf(dev, "interrupt setup failed\n");
164 goto fail;
165 }
166
167 /*
168 * Enable the "local" interrupt input to generate a
169 * PCI interrupt.
170 */
171 plx_ver = *((u_char *)vaddr + PLX_VER) & 0x0f;
172 switch (plx_ver) {
173 case PLX_9050:
174 outw(ioport + CY_PLX_9050_ICS,
175 CY_PLX_9050_ICS_IENABLE | CY_PLX_9050_ICS_LOCAL_IENABLE |
176 CY_PLX_9050_ICS_LOCAL_IPOLARITY);
177 break;
178 case PLX_9060:
179 case PLX_9080:
180 default: /* Old board, use PLX_9060 values. */
181 outw(ioport + CY_PLX_9060_ICS,
182 inw(ioport + CY_PLX_9060_ICS) | CY_PLX_9060_ICS_IENABLE |
183 CY_PLX_9060_ICS_LOCAL_IENABLE);
184 break;
185 }
186
187 return (0);
188
189 fail:
190 if (ioport_res != NULL)
191 bus_release_resource(dev, SYS_RES_IOPORT, ioport_rid,
192 ioport_res);
193 if (irq_res != NULL)
194 bus_release_resource(dev, SYS_RES_IRQ, irq_rid, irq_res);
195 if (mem_res != NULL)
196 bus_release_resource(dev, SYS_RES_MEMORY, mem_rid, mem_res);
197 return (ENXIO);
198 }
Cache object: 6937851f7d5adeccb2a00594f54934ed
|