FreeBSD/Linux Kernel Cross Reference
sys/pci/if_sis.c

     /*-
      * Copyright (c) 2005 Poul-Henning Kamp <phk@FreeBSD.org>
      * Copyright (c) 1997, 1998, 1999
      *      Bill Paul <wpaul@ctr.columbia.edu>.  All rights reserved.
      *
      * Redistribution and use in source and binary forms, with or without
      * modification, are permitted provided that the following conditions
      * are met:
      * 1. Redistributions of source code must retain the above copyright
     *    notice, this list of conditions and the following disclaimer.
     * 2. Redistributions in binary form must reproduce the above copyright
     *    notice, this list of conditions and the following disclaimer in the
     *    documentation and/or other materials provided with the distribution.
     * 3. All advertising materials mentioning features or use of this software
     *    must display the following acknowledgement:
     *      This product includes software developed by Bill Paul.
     * 4. Neither the name of the author nor the names of any co-contributors
     *    may be used to endorse or promote products derived from this software
     *    without specific prior written permission.
     *
     * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
     * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
     * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
     * THE POSSIBILITY OF SUCH DAMAGE.
     */
    
    #include <sys/cdefs.h>
    __FBSDID("$FreeBSD$");
    
    /*
     * SiS 900/SiS 7016 fast ethernet PCI NIC driver. Datasheets are
     * available from http://www.sis.com.tw.
     *
     * This driver also supports the NatSemi DP83815. Datasheets are
     * available from http://www.national.com.
     *
     * Written by Bill Paul <wpaul@ee.columbia.edu>
     * Electrical Engineering Department
     * Columbia University, New York City
     */
    /*
     * The SiS 900 is a fairly simple chip. It uses bus master DMA with
     * simple TX and RX descriptors of 3 longwords in size. The receiver
     * has a single perfect filter entry for the station address and a
     * 128-bit multicast hash table. The SiS 900 has a built-in MII-based
     * transceiver while the 7016 requires an external transceiver chip.
     * Both chips offer the standard bit-bang MII interface as well as
     * an enchanced PHY interface which simplifies accessing MII registers.
     *
     * The only downside to this chipset is that RX descriptors must be
     * longword aligned.
     */
    
    #ifdef HAVE_KERNEL_OPTION_HEADERS
    #include "opt_device_polling.h"
    #endif
    
    #include <sys/param.h>
    #include <sys/systm.h>
    #include <sys/sockio.h>
    #include <sys/mbuf.h>
    #include <sys/malloc.h>
    #include <sys/kernel.h>
    #include <sys/module.h>
    #include <sys/socket.h>
    
    #include <net/if.h>
    #include <net/if_arp.h>
    #include <net/ethernet.h>
    #include <net/if_dl.h>
    #include <net/if_media.h>
    #include <net/if_types.h>
    #include <net/if_vlan_var.h>
    
    #include <net/bpf.h>
    
    #include <machine/bus.h>
    #include <machine/resource.h>
    #include <sys/bus.h>
    #include <sys/rman.h>
    
    #include <dev/mii/mii.h>
    #include <dev/mii/miivar.h>
    
    #include <dev/pci/pcireg.h>
    #include <dev/pci/pcivar.h>
    
    #define SIS_USEIOSPACE
    
    #include <pci/if_sisreg.h>
    
    MODULE_DEPEND(sis, pci, 1, 1, 1);
   MODULE_DEPEND(sis, ether, 1, 1, 1);
   MODULE_DEPEND(sis, miibus, 1, 1, 1);
   
   /* "device miibus" required.  See GENERIC if you get errors here. */
   #include "miibus_if.h"
   
   #define SIS_LOCK(_sc)           mtx_lock(&(_sc)->sis_mtx)
   #define SIS_UNLOCK(_sc)         mtx_unlock(&(_sc)->sis_mtx)
   #define SIS_LOCK_ASSERT(_sc)    mtx_assert(&(_sc)->sis_mtx, MA_OWNED)
   
   /*
    * register space access macros
    */
   #define CSR_WRITE_4(sc, reg, val)       bus_write_4(sc->sis_res[0], reg, val)
   
   #define CSR_READ_4(sc, reg)             bus_read_4(sc->sis_res[0], reg)
   
   #define CSR_READ_2(sc, reg)             bus_read_2(sc->sis_res[0], reg)
   
   /*
    * Various supported device vendors/types and their names.
    */
   static struct sis_type sis_devs[] = {
           { SIS_VENDORID, SIS_DEVICEID_900, "SiS 900 10/100BaseTX" },
           { SIS_VENDORID, SIS_DEVICEID_7016, "SiS 7016 10/100BaseTX" },
           { NS_VENDORID, NS_DEVICEID_DP83815, "NatSemi DP8381[56] 10/100BaseTX" },
           { 0, 0, NULL }
   };
   
   static int sis_detach(device_t);
   static void sis_ifmedia_sts(struct ifnet *, struct ifmediareq *);
   static int sis_ifmedia_upd(struct ifnet *);
   static void sis_init(void *);
   static void sis_initl(struct sis_softc *);
   static void sis_intr(void *);
   static int sis_ioctl(struct ifnet *, u_long, caddr_t);
   static int sis_newbuf(struct sis_softc *, struct sis_desc *, struct mbuf *);
   static void sis_start(struct ifnet *);
   static void sis_startl(struct ifnet *);
   static void sis_stop(struct sis_softc *);
   static void sis_watchdog(struct sis_softc *);
   
   
   static struct resource_spec sis_res_spec[] = {
   #ifdef SIS_USEIOSPACE
           { SYS_RES_IOPORT,       SIS_PCI_LOIO,   RF_ACTIVE},
   #else
           { SYS_RES_MEMORY,       SIS_PCI_LOMEM,  RF_ACTIVE},
   #endif
           { SYS_RES_IRQ,          0,              RF_ACTIVE | RF_SHAREABLE},
           { -1, 0 }
   };
   
   #define SIS_SETBIT(sc, reg, x)                          \
           CSR_WRITE_4(sc, reg,                            \
                   CSR_READ_4(sc, reg) | (x))
   
   #define SIS_CLRBIT(sc, reg, x)                          \
           CSR_WRITE_4(sc, reg,                            \
                   CSR_READ_4(sc, reg) & ~(x))
   
   #define SIO_SET(x)                                      \
           CSR_WRITE_4(sc, SIS_EECTL, CSR_READ_4(sc, SIS_EECTL) | x)
   
   #define SIO_CLR(x)                                      \
           CSR_WRITE_4(sc, SIS_EECTL, CSR_READ_4(sc, SIS_EECTL) & ~x)
   
   static void
   sis_dma_map_desc_next(void *arg, bus_dma_segment_t *segs, int nseg, int error)
   {
           struct sis_desc *r;
   
           r = arg;
           r->sis_next = segs->ds_addr;
   }
   
   static void
   sis_dma_map_desc_ptr(void *arg, bus_dma_segment_t *segs, int nseg, int error)
   {
           struct sis_desc *r;
   
           r = arg;
           r->sis_ptr = segs->ds_addr;
   }
   
   static void
   sis_dma_map_ring(void *arg, bus_dma_segment_t *segs, int nseg, int error)
   {
           u_int32_t *p;
   
           p = arg;
           *p = segs->ds_addr;
   }
   
   /*
    * Routine to reverse the bits in a word. Stolen almost
    * verbatim from /usr/games/fortune.
    */
   static uint16_t
   sis_reverse(uint16_t n)
   {
           n = ((n >>  1) & 0x5555) | ((n <<  1) & 0xaaaa);
           n = ((n >>  2) & 0x3333) | ((n <<  2) & 0xcccc);
           n = ((n >>  4) & 0x0f0f) | ((n <<  4) & 0xf0f0);
           n = ((n >>  8) & 0x00ff) | ((n <<  8) & 0xff00);
   
           return(n);
   }
   
   static void
   sis_delay(struct sis_softc *sc)
   {
           int                     idx;
   
           for (idx = (300 / 33) + 1; idx > 0; idx--)
                   CSR_READ_4(sc, SIS_CSR);
   }
   
   static void
   sis_eeprom_idle(struct sis_softc *sc)
   {
           int             i;
   
           SIO_SET(SIS_EECTL_CSEL);
           sis_delay(sc);
           SIO_SET(SIS_EECTL_CLK);
           sis_delay(sc);
   
           for (i = 0; i < 25; i++) {
                   SIO_CLR(SIS_EECTL_CLK);
                   sis_delay(sc);
                   SIO_SET(SIS_EECTL_CLK);
                   sis_delay(sc);
           }
   
           SIO_CLR(SIS_EECTL_CLK);
           sis_delay(sc);
           SIO_CLR(SIS_EECTL_CSEL);
           sis_delay(sc);
           CSR_WRITE_4(sc, SIS_EECTL, 0x00000000);
   }
   
   /*
    * Send a read command and address to the EEPROM, check for ACK.
    */
   static void
   sis_eeprom_putbyte(struct sis_softc *sc, int addr)
   {
           int             d, i;
   
           d = addr | SIS_EECMD_READ;
   
           /*
            * Feed in each bit and stobe the clock.
            */
           for (i = 0x400; i; i >>= 1) {
                   if (d & i) {
                           SIO_SET(SIS_EECTL_DIN);
                   } else {
                           SIO_CLR(SIS_EECTL_DIN);
                   }
                   sis_delay(sc);
                   SIO_SET(SIS_EECTL_CLK);
                   sis_delay(sc);
                   SIO_CLR(SIS_EECTL_CLK);
                   sis_delay(sc);
           }
   }
   
   /*
    * Read a word of data stored in the EEPROM at address 'addr.'
    */
   static void
   sis_eeprom_getword(struct sis_softc *sc, int addr, uint16_t *dest)
   {
           int             i;
           u_int16_t               word = 0;
   
           /* Force EEPROM to idle state. */
           sis_eeprom_idle(sc);
   
           /* Enter EEPROM access mode. */
           sis_delay(sc);
           SIO_CLR(SIS_EECTL_CLK);
           sis_delay(sc);
           SIO_SET(SIS_EECTL_CSEL);
           sis_delay(sc);
   
           /*
            * Send address of word we want to read.
            */
           sis_eeprom_putbyte(sc, addr);
   
           /*
            * Start reading bits from EEPROM.
            */
           for (i = 0x8000; i; i >>= 1) {
                   SIO_SET(SIS_EECTL_CLK);
                   sis_delay(sc);
                   if (CSR_READ_4(sc, SIS_EECTL) & SIS_EECTL_DOUT)
                           word |= i;
                   sis_delay(sc);
                   SIO_CLR(SIS_EECTL_CLK);
                   sis_delay(sc);
           }
   
           /* Turn off EEPROM access mode. */
           sis_eeprom_idle(sc);
   
           *dest = word;
   }
   
   /*
    * Read a sequence of words from the EEPROM.
    */
   static void
   sis_read_eeprom(struct sis_softc *sc, caddr_t dest, int off, int cnt, int swap)
   {
           int                     i;
           u_int16_t               word = 0, *ptr;
   
           for (i = 0; i < cnt; i++) {
                   sis_eeprom_getword(sc, off + i, &word);
                   ptr = (u_int16_t *)(dest + (i * 2));
                   if (swap)
                           *ptr = ntohs(word);
                   else
                           *ptr = word;
           }
   }
   
   #if defined(__i386__) || defined(__amd64__)
   static device_t
   sis_find_bridge(device_t dev)
   {
           devclass_t              pci_devclass;
           device_t                *pci_devices;
           int                     pci_count = 0;
           device_t                *pci_children;
           int                     pci_childcount = 0;
           device_t                *busp, *childp;
           device_t                child = NULL;
           int                     i, j;
   
           if ((pci_devclass = devclass_find("pci")) == NULL)
                   return(NULL);
   
           devclass_get_devices(pci_devclass, &pci_devices, &pci_count);
   
           for (i = 0, busp = pci_devices; i < pci_count; i++, busp++) {
                   pci_childcount = 0;
                   device_get_children(*busp, &pci_children, &pci_childcount);
                   for (j = 0, childp = pci_children;
                       j < pci_childcount; j++, childp++) {
                           if (pci_get_vendor(*childp) == SIS_VENDORID &&
                               pci_get_device(*childp) == 0x0008) {
                                   child = *childp;
                                   goto done;
                           }
                   }
           }
   
   done:
           free(pci_devices, M_TEMP);
           free(pci_children, M_TEMP);
           return(child);
   }
   
   static void
   sis_read_cmos(struct sis_softc *sc, device_t dev, caddr_t dest, int off, int cnt)
   {
           device_t                bridge;
           u_int8_t                reg;
           int                     i;
           bus_space_tag_t         btag;
   
           bridge = sis_find_bridge(dev);
           if (bridge == NULL)
                   return;
           reg = pci_read_config(bridge, 0x48, 1);
           pci_write_config(bridge, 0x48, reg|0x40, 1);
   
           /* XXX */
   #if defined(__i386__)
           btag = I386_BUS_SPACE_IO;
   #elif defined(__amd64__)
           btag = AMD64_BUS_SPACE_IO;
   #endif
   
           for (i = 0; i < cnt; i++) {
                   bus_space_write_1(btag, 0x0, 0x70, i + off);
                   *(dest + i) = bus_space_read_1(btag, 0x0, 0x71);
           }
   
           pci_write_config(bridge, 0x48, reg & ~0x40, 1);
           return;
   }
   
   static void
   sis_read_mac(struct sis_softc *sc, device_t dev, caddr_t dest)
   {
           u_int32_t               filtsave, csrsave;
   
           filtsave = CSR_READ_4(sc, SIS_RXFILT_CTL);
           csrsave = CSR_READ_4(sc, SIS_CSR);
   
           CSR_WRITE_4(sc, SIS_CSR, SIS_CSR_RELOAD | filtsave);
           CSR_WRITE_4(sc, SIS_CSR, 0);
                   
           CSR_WRITE_4(sc, SIS_RXFILT_CTL, filtsave & ~SIS_RXFILTCTL_ENABLE);
   
           CSR_WRITE_4(sc, SIS_RXFILT_CTL, SIS_FILTADDR_PAR0);
           ((u_int16_t *)dest)[0] = CSR_READ_2(sc, SIS_RXFILT_DATA);
           CSR_WRITE_4(sc, SIS_RXFILT_CTL,SIS_FILTADDR_PAR1);
           ((u_int16_t *)dest)[1] = CSR_READ_2(sc, SIS_RXFILT_DATA);
           CSR_WRITE_4(sc, SIS_RXFILT_CTL, SIS_FILTADDR_PAR2);
           ((u_int16_t *)dest)[2] = CSR_READ_2(sc, SIS_RXFILT_DATA);
   
           CSR_WRITE_4(sc, SIS_RXFILT_CTL, filtsave);
           CSR_WRITE_4(sc, SIS_CSR, csrsave);
           return;
   }
   #endif
   
   /*
    * Sync the PHYs by setting data bit and strobing the clock 32 times.
    */
   static void
   sis_mii_sync(struct sis_softc *sc)
   {
           int             i;
    
           SIO_SET(SIS_MII_DIR|SIS_MII_DATA);
    
           for (i = 0; i < 32; i++) {
                   SIO_SET(SIS_MII_CLK);
                   DELAY(1);
                   SIO_CLR(SIS_MII_CLK);
                   DELAY(1);
           }
   }
    
   /*
    * Clock a series of bits through the MII.
    */
   static void
   sis_mii_send(struct sis_softc *sc, uint32_t bits, int cnt)
   {
           int                     i;
    
           SIO_CLR(SIS_MII_CLK);
    
           for (i = (0x1 << (cnt - 1)); i; i >>= 1) {
                   if (bits & i) {
                           SIO_SET(SIS_MII_DATA);
                   } else {
                           SIO_CLR(SIS_MII_DATA);
                   }
                   DELAY(1);
                   SIO_CLR(SIS_MII_CLK);
                   DELAY(1);
                   SIO_SET(SIS_MII_CLK);
           }
   }
    
   /*
    * Read an PHY register through the MII.
    */
   static int
   sis_mii_readreg(struct sis_softc *sc, struct sis_mii_frame *frame)
   {
           int                     i, ack;
    
           /*
            * Set up frame for RX.
            */
           frame->mii_stdelim = SIS_MII_STARTDELIM;
           frame->mii_opcode = SIS_MII_READOP;
           frame->mii_turnaround = 0;
           frame->mii_data = 0;
           
           /*
            * Turn on data xmit.
            */
           SIO_SET(SIS_MII_DIR);
   
           sis_mii_sync(sc);
    
           /*
            * Send command/address info.
            */
           sis_mii_send(sc, frame->mii_stdelim, 2);
           sis_mii_send(sc, frame->mii_opcode, 2);
           sis_mii_send(sc, frame->mii_phyaddr, 5);
           sis_mii_send(sc, frame->mii_regaddr, 5);
    
           /* Idle bit */
           SIO_CLR((SIS_MII_CLK|SIS_MII_DATA));
           DELAY(1);
           SIO_SET(SIS_MII_CLK);
           DELAY(1);
    
           /* Turn off xmit. */
           SIO_CLR(SIS_MII_DIR);
    
           /* Check for ack */
           SIO_CLR(SIS_MII_CLK);
           DELAY(1);
           ack = CSR_READ_4(sc, SIS_EECTL) & SIS_MII_DATA;
           SIO_SET(SIS_MII_CLK);
           DELAY(1);
    
           /*
            * Now try reading data bits. If the ack failed, we still
            * need to clock through 16 cycles to keep the PHY(s) in sync.
            */
           if (ack) {
                   for(i = 0; i < 16; i++) {
                           SIO_CLR(SIS_MII_CLK);
                           DELAY(1);
                           SIO_SET(SIS_MII_CLK);
                           DELAY(1);
                   }
                   goto fail;
           }
    
           for (i = 0x8000; i; i >>= 1) {
                   SIO_CLR(SIS_MII_CLK);
                   DELAY(1);
                   if (!ack) {
                           if (CSR_READ_4(sc, SIS_EECTL) & SIS_MII_DATA)
                                   frame->mii_data |= i;
                           DELAY(1);
                   }
                   SIO_SET(SIS_MII_CLK);
                   DELAY(1);
           }
   
   fail:
   
           SIO_CLR(SIS_MII_CLK);
           DELAY(1);
           SIO_SET(SIS_MII_CLK);
           DELAY(1);
   
           if (ack)
                   return(1);
           return(0);
   }
    
   /*
    * Write to a PHY register through the MII.
    */
   static int
   sis_mii_writereg(struct sis_softc *sc, struct sis_mii_frame *frame)
   {
    
           /*
            * Set up frame for TX.
            */
    
           frame->mii_stdelim = SIS_MII_STARTDELIM;
           frame->mii_opcode = SIS_MII_WRITEOP;
           frame->mii_turnaround = SIS_MII_TURNAROUND;
           
           /*
            * Turn on data output.
            */
           SIO_SET(SIS_MII_DIR);
    
           sis_mii_sync(sc);
    
           sis_mii_send(sc, frame->mii_stdelim, 2);
           sis_mii_send(sc, frame->mii_opcode, 2);
           sis_mii_send(sc, frame->mii_phyaddr, 5);
           sis_mii_send(sc, frame->mii_regaddr, 5);
           sis_mii_send(sc, frame->mii_turnaround, 2);
           sis_mii_send(sc, frame->mii_data, 16);
    
           /* Idle bit. */
           SIO_SET(SIS_MII_CLK);
           DELAY(1);
           SIO_CLR(SIS_MII_CLK);
           DELAY(1);
    
           /*
            * Turn off xmit.
            */
           SIO_CLR(SIS_MII_DIR);
    
           return(0);
   }
   
   static int
   sis_miibus_readreg(device_t dev, int phy, int reg)
   {
           struct sis_softc        *sc;
           struct sis_mii_frame    frame;
   
           sc = device_get_softc(dev);
   
           if (sc->sis_type == SIS_TYPE_83815) {
                   if (phy != 0)
                           return(0);
                   /*
                    * The NatSemi chip can take a while after
                    * a reset to come ready, during which the BMSR
                    * returns a value of 0. This is *never* supposed
                    * to happen: some of the BMSR bits are meant to
                    * be hardwired in the on position, and this can
                    * confuse the miibus code a bit during the probe
                    * and attach phase. So we make an effort to check
                    * for this condition and wait for it to clear.
                    */
                   if (!CSR_READ_4(sc, NS_BMSR))
                           DELAY(1000);
                   return CSR_READ_4(sc, NS_BMCR + (reg * 4));
           }
   
           /*
            * Chipsets < SIS_635 seem not to be able to read/write
            * through mdio. Use the enhanced PHY access register
            * again for them.
            */
           if (sc->sis_type == SIS_TYPE_900 &&
               sc->sis_rev < SIS_REV_635) {
                   int i, val = 0;
   
                   if (phy != 0)
                           return(0);
   
                   CSR_WRITE_4(sc, SIS_PHYCTL,
                       (phy << 11) | (reg << 6) | SIS_PHYOP_READ);
                   SIS_SETBIT(sc, SIS_PHYCTL, SIS_PHYCTL_ACCESS);
   
                   for (i = 0; i < SIS_TIMEOUT; i++) {
                           if (!(CSR_READ_4(sc, SIS_PHYCTL) & SIS_PHYCTL_ACCESS))
                                   break;
                   }
   
                   if (i == SIS_TIMEOUT) {
                           device_printf(sc->sis_dev, "PHY failed to come ready\n");
                           return(0);
                   }
   
                   val = (CSR_READ_4(sc, SIS_PHYCTL) >> 16) & 0xFFFF;
   
                   if (val == 0xFFFF)
                           return(0);
   
                   return(val);
           } else {
                   bzero((char *)&frame, sizeof(frame));
   
                   frame.mii_phyaddr = phy;
                   frame.mii_regaddr = reg;
                   sis_mii_readreg(sc, &frame);
   
                   return(frame.mii_data);
           }
   }
   
   static int
   sis_miibus_writereg(device_t dev, int phy, int reg, int data)
   {
           struct sis_softc        *sc;
           struct sis_mii_frame    frame;
   
           sc = device_get_softc(dev);
   
           if (sc->sis_type == SIS_TYPE_83815) {
                   if (phy != 0)
                           return(0);
                   CSR_WRITE_4(sc, NS_BMCR + (reg * 4), data);
                   return(0);
           }
   
           /*
            * Chipsets < SIS_635 seem not to be able to read/write
            * through mdio. Use the enhanced PHY access register
            * again for them.
            */
           if (sc->sis_type == SIS_TYPE_900 &&
               sc->sis_rev < SIS_REV_635) {
                   int i;
   
                   if (phy != 0)
                           return(0);
   
                   CSR_WRITE_4(sc, SIS_PHYCTL, (data << 16) | (phy << 11) |
                       (reg << 6) | SIS_PHYOP_WRITE);
                   SIS_SETBIT(sc, SIS_PHYCTL, SIS_PHYCTL_ACCESS);
   
                   for (i = 0; i < SIS_TIMEOUT; i++) {
                           if (!(CSR_READ_4(sc, SIS_PHYCTL) & SIS_PHYCTL_ACCESS))
                                   break;
                   }
   
                   if (i == SIS_TIMEOUT)
                           device_printf(sc->sis_dev, "PHY failed to come ready\n");
           } else {
                   bzero((char *)&frame, sizeof(frame));
   
                   frame.mii_phyaddr = phy;
                   frame.mii_regaddr = reg;
                   frame.mii_data = data;
                   sis_mii_writereg(sc, &frame);
           }
           return(0);
   }
   
   static void
   sis_miibus_statchg(device_t dev)
   {
           struct sis_softc        *sc;
   
           sc = device_get_softc(dev);
           SIS_LOCK_ASSERT(sc);
           sis_initl(sc);
   }
   
   static uint32_t
   sis_mchash(struct sis_softc *sc, const uint8_t *addr)
   {
           uint32_t                crc;
   
           /* Compute CRC for the address value. */
           crc = ether_crc32_be(addr, ETHER_ADDR_LEN);
   
           /*
            * return the filter bit position
            *
            * The NatSemi chip has a 512-bit filter, which is
            * different than the SiS, so we special-case it.
            */
           if (sc->sis_type == SIS_TYPE_83815)
                   return (crc >> 23);
           else if (sc->sis_rev >= SIS_REV_635 ||
               sc->sis_rev == SIS_REV_900B)
                   return (crc >> 24);
           else
                   return (crc >> 25);
   }
   
   static void
   sis_setmulti_ns(struct sis_softc *sc)
   {
           struct ifnet            *ifp;
           struct ifmultiaddr      *ifma;
           u_int32_t               h = 0, i, filtsave;
           int                     bit, index;
   
           ifp = sc->sis_ifp;
   
           if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
                   SIS_CLRBIT(sc, SIS_RXFILT_CTL, NS_RXFILTCTL_MCHASH);
                   SIS_SETBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_ALLMULTI);
                   return;
           }
   
           /*
            * We have to explicitly enable the multicast hash table
            * on the NatSemi chip if we want to use it, which we do.
            */
           SIS_SETBIT(sc, SIS_RXFILT_CTL, NS_RXFILTCTL_MCHASH);
           SIS_CLRBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_ALLMULTI);
   
           filtsave = CSR_READ_4(sc, SIS_RXFILT_CTL);
   
           /* first, zot all the existing hash bits */
           for (i = 0; i < 32; i++) {
                   CSR_WRITE_4(sc, SIS_RXFILT_CTL, NS_FILTADDR_FMEM_LO + (i*2));
                   CSR_WRITE_4(sc, SIS_RXFILT_DATA, 0);
           }
   
           IF_ADDR_LOCK(ifp);
           TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
                   if (ifma->ifma_addr->sa_family != AF_LINK)
                           continue;
                   h = sis_mchash(sc,
                       LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
                   index = h >> 3;
                   bit = h & 0x1F;
                   CSR_WRITE_4(sc, SIS_RXFILT_CTL, NS_FILTADDR_FMEM_LO + index);
                   if (bit > 0xF)
                           bit -= 0x10;
                   SIS_SETBIT(sc, SIS_RXFILT_DATA, (1 << bit));
           }
           IF_ADDR_UNLOCK(ifp);
   
           CSR_WRITE_4(sc, SIS_RXFILT_CTL, filtsave);
   
           return;
   }
   
   static void
   sis_setmulti_sis(struct sis_softc *sc)
   {
           struct ifnet            *ifp;
           struct ifmultiaddr      *ifma;
           u_int32_t               h, i, n, ctl;
           u_int16_t               hashes[16];
   
           ifp = sc->sis_ifp;
   
           /* hash table size */
           if (sc->sis_rev >= SIS_REV_635 ||
               sc->sis_rev == SIS_REV_900B)
                   n = 16;
           else
                   n = 8;
   
           ctl = CSR_READ_4(sc, SIS_RXFILT_CTL) & SIS_RXFILTCTL_ENABLE;
   
           if (ifp->if_flags & IFF_BROADCAST)
                   ctl |= SIS_RXFILTCTL_BROAD;
   
           if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
                   ctl |= SIS_RXFILTCTL_ALLMULTI;
                   if (ifp->if_flags & IFF_PROMISC)
                           ctl |= SIS_RXFILTCTL_BROAD|SIS_RXFILTCTL_ALLPHYS;
                   for (i = 0; i < n; i++)
                           hashes[i] = ~0;
           } else {
                   for (i = 0; i < n; i++)
                           hashes[i] = 0;
                   i = 0;
                   IF_ADDR_LOCK(ifp);
                   TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
                           if (ifma->ifma_addr->sa_family != AF_LINK)
                           continue;
                           h = sis_mchash(sc,
                               LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
                           hashes[h >> 4] |= 1 << (h & 0xf);
                           i++;
                   }
                   IF_ADDR_UNLOCK(ifp);
                   if (i > n) {
                           ctl |= SIS_RXFILTCTL_ALLMULTI;
                           for (i = 0; i < n; i++)
                                   hashes[i] = ~0;
                   }
           }
   
           for (i = 0; i < n; i++) {
                   CSR_WRITE_4(sc, SIS_RXFILT_CTL, (4 + i) << 16);
                   CSR_WRITE_4(sc, SIS_RXFILT_DATA, hashes[i]);
           }
   
           CSR_WRITE_4(sc, SIS_RXFILT_CTL, ctl);
   }
   
   static void
   sis_reset(struct sis_softc *sc)
   {
           int             i;
   
           SIS_SETBIT(sc, SIS_CSR, SIS_CSR_RESET);
   
           for (i = 0; i < SIS_TIMEOUT; i++) {
                   if (!(CSR_READ_4(sc, SIS_CSR) & SIS_CSR_RESET))
                           break;
           }
   
           if (i == SIS_TIMEOUT)
                   device_printf(sc->sis_dev, "reset never completed\n");
   
           /* Wait a little while for the chip to get its brains in order. */
           DELAY(1000);
   
           /*
            * If this is a NetSemi chip, make sure to clear
            * PME mode.
            */
           if (sc->sis_type == SIS_TYPE_83815) {
                   CSR_WRITE_4(sc, NS_CLKRUN, NS_CLKRUN_PMESTS);
                   CSR_WRITE_4(sc, NS_CLKRUN, 0);
           }
   
           return;
   }
   
   /*
    * Probe for an SiS chip. Check the PCI vendor and device
    * IDs against our list and return a device name if we find a match.
    */
   static int
   sis_probe(device_t dev)
   {
           struct sis_type         *t;
   
           t = sis_devs;
   
           while(t->sis_name != NULL) {
                   if ((pci_get_vendor(dev) == t->sis_vid) &&
                       (pci_get_device(dev) == t->sis_did)) {
                           device_set_desc(dev, t->sis_name);
                           return (BUS_PROBE_DEFAULT);
                   }
                   t++;
           }
   
           return(ENXIO);
   }
   
   /*
    * Attach the interface. Allocate softc structures, do ifmedia
    * setup and ethernet/BPF attach.
    */
   static int
   sis_attach(device_t dev)
   {
           u_char                  eaddr[ETHER_ADDR_LEN];
           struct sis_softc        *sc;
           struct ifnet            *ifp;
           int                     error = 0, waittime = 0;
   
           waittime = 0;
           sc = device_get_softc(dev);
   
           sc->sis_dev = dev;
   
           mtx_init(&sc->sis_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
               MTX_DEF);
           callout_init_mtx(&sc->sis_stat_ch, &sc->sis_mtx, 0);
   
           if (pci_get_device(dev) == SIS_DEVICEID_900)
                   sc->sis_type = SIS_TYPE_900;
           if (pci_get_device(dev) == SIS_DEVICEID_7016)
                   sc->sis_type = SIS_TYPE_7016;
           if (pci_get_vendor(dev) == NS_VENDORID)
                   sc->sis_type = SIS_TYPE_83815;
   
           sc->sis_rev = pci_read_config(dev, PCIR_REVID, 1);
           /*
            * Map control/status registers.
            */
           pci_enable_busmaster(dev);
   
           error = bus_alloc_resources(dev, sis_res_spec, sc->sis_res);
           if (error) {
                   device_printf(dev, "couldn't allocate resources\n");
                   goto fail;
           }
   
           /* Reset the adapter. */
           sis_reset(sc);
   
           if (sc->sis_type == SIS_TYPE_900 &&
               (sc->sis_rev == SIS_REV_635 ||
               sc->sis_rev == SIS_REV_900B)) {
                   SIO_SET(SIS_CFG_RND_CNT);
                   SIO_SET(SIS_CFG_PERR_DETECT);
           }
   
           /*
            * Get station address from the EEPROM.
            */
           switch (pci_get_vendor(dev)) {
           case NS_VENDORID:
                   sc->sis_srr = CSR_READ_4(sc, NS_SRR);
   
                   /* We can't update the device description, so spew */
                   if (sc->sis_srr == NS_SRR_15C)
                           device_printf(dev, "Silicon Revision: DP83815C\n");
                   else if (sc->sis_srr == NS_SRR_15D)
                           device_printf(dev, "Silicon Revision: DP83815D\n");
                   else if (sc->sis_srr == NS_SRR_16A)
                           device_printf(dev, "Silicon Revision: DP83816A\n");
                   else
                           device_printf(dev, "Silicon Revision %x\n", sc->sis_srr);
   
                   /*
                    * Reading the MAC address out of the EEPROM on
                    * the NatSemi chip takes a bit more work than
                    * you'd expect. The address spans 4 16-bit words,
                    * with the first word containing only a single bit.
                    * You have to shift everything over one bit to
                    * get it aligned properly. Also, the bits are
                    * stored backwards (the LSB is really the MSB,
                    * and so on) so you have to reverse them in order
                    * to get the MAC address into the form we want.
                    * Why? Who the hell knows.
                    */
                   {
                           u_int16_t               tmp[4];
   
                           sis_read_eeprom(sc, (caddr_t)&tmp,
                               NS_EE_NODEADDR, 4, 0);
   
                           /* Shift everything over one bit. */
                           tmp[3] = tmp[3] >> 1;
                           tmp[3] |= tmp[2] << 15;
                           tmp[2] = tmp[2] >> 1;
                           tmp[2] |= tmp[1] << 15;
                           tmp[1] = tmp[1] >> 1;
                           tmp[1] |= tmp[0] << 15;
   
                           /* Now reverse all the bits. */
                           tmp[3] = sis_reverse(tmp[3]);
                          tmp[2] = sis_reverse(tmp[2]);
                          tmp[1] = sis_reverse(tmp[1]);
  
                          bcopy((char *)&tmp[1], eaddr, ETHER_ADDR_LEN);
                  }
                  break;
          case SIS_VENDORID:
          default:
  #if defined(__i386__) || defined(__amd64__)
                  /*
                   * If this is a SiS 630E chipset with an embedded
                   * SiS 900 controller, we have to read the MAC address
                   * from the APC CMOS RAM. Our method for doing this
                   * is very ugly since we have to reach out and grab
                   * ahold of hardware for which we cannot properly
                   * allocate resources. This code is only compiled on
                   * the i386 architecture since the SiS 630E chipset
                   * is for x86 motherboards only. Note that there are
                   * a lot of magic numbers in this hack. These are
                   * taken from SiS's Linux driver. I'd like to replace
                   * them with proper symbolic definitions, but that
                   * requires some datasheets that I don't have access
                   * to at the moment.
                   */
                  if (sc->sis_rev == SIS_REV_630S ||
                      sc->sis_rev == SIS_REV_630E ||
                      sc->sis_rev == SIS_REV_630EA1)
                          sis_read_cmos(sc, dev, (caddr_t)&eaddr, 0x9, 6);
  
                  else if (sc->sis_rev == SIS_REV_635 ||
                           sc->sis_rev == SIS_REV_630ET)
                          sis_read_mac(sc, dev, (caddr_t)&eaddr);
                  else if (sc->sis_rev == SIS_REV_96x) {
                          /* Allow to read EEPROM from LAN. It is shared
                           * between a 1394 controller and the NIC and each
                           * time we access it, we need to set SIS_EECMD_REQ.
                           */
                          SIO_SET(SIS_EECMD_REQ);
                          for (waittime = 0; waittime < SIS_TIMEOUT;
                              waittime++) {
                                  /* Force EEPROM to idle state. */
                                  sis_eeprom_idle(sc);
                                  if (CSR_READ_4(sc, SIS_EECTL) & SIS_EECMD_GNT) {
                                          sis_read_eeprom(sc, (caddr_t)&eaddr,
                                              SIS_EE_NODEADDR, 3, 0);
                                          break;
                                  }
                                  DELAY(1);
                          }
                          /*
                           * Set SIS_EECTL_CLK to high, so a other master
                           * can operate on the i2c bus.
                           */
                          SIO_SET(SIS_EECTL_CLK);
                          /* Refuse EEPROM access by LAN */
                          SIO_SET(SIS_EECMD_DONE);
                  } else
  #endif
                          sis_read_eeprom(sc, (caddr_t)&eaddr,
                              SIS_EE_NODEADDR, 3, 0);
                  break;
          }
  
          /*
           * Allocate the parent bus DMA tag appropriate for PCI.
           */
  #define SIS_NSEG_NEW 32
           error = bus_dma_tag_create(NULL,       /* parent */ 
                          1, 0,                   /* alignment, boundary */
                          BUS_SPACE_MAXADDR_32BIT,/* lowaddr */
                          BUS_SPACE_MAXADDR,      /* highaddr */
                          NULL, NULL,             /* filter, filterarg */
                          MAXBSIZE, SIS_NSEG_NEW, /* maxsize, nsegments */
                          BUS_SPACE_MAXSIZE_32BIT,/* maxsegsize */ 
                          BUS_DMA_ALLOCNOW,       /* flags */
                          NULL, NULL,             /* lockfunc, lockarg */
                          &sc->sis_parent_tag);
          if (error)
                  goto fail;
  
          /*
           * Now allocate a tag for the DMA descriptor lists and a chunk
           * of DMA-able memory based on the tag.  Also obtain the physical
           * addresses of the RX and TX ring, which we'll need later.
           * All of our lists are allocated as a contiguous block
           * of memory.
           */
          error = bus_dma_tag_create(sc->sis_parent_tag,  /* parent */
                          1, 0,                   /* alignment, boundary */
                          BUS_SPACE_MAXADDR,      /* lowaddr */
                          BUS_SPACE_MAXADDR,      /* highaddr */
                          NULL, NULL,             /* filter, filterarg */
                          SIS_RX_LIST_SZ, 1,      /* maxsize,nsegments */
                          BUS_SPACE_MAXSIZE_32BIT,/* maxsegsize */
                          0,                      /* flags */
                          busdma_lock_mutex,      /* lockfunc */
                          &Giant,                 /* lockarg */
                          &sc->sis_rx_tag);
          if (error)
                  goto fail;
  
          error = bus_dmamem_alloc(sc->sis_rx_tag,
              (void **)&sc->sis_rx_list, BUS_DMA_NOWAIT | BUS_DMA_ZERO,
              &sc->sis_rx_dmamap);
  
          if (error) {
                  device_printf(dev, "no memory for rx list buffers!\n");
                  bus_dma_tag_destroy(sc->sis_rx_tag);
                  sc->sis_rx_tag = NULL;
                  goto fail;
          }
  
          error = bus_dmamap_load(sc->sis_rx_tag,
              sc->sis_rx_dmamap, &(sc->sis_rx_list[0]),
              sizeof(struct sis_desc), sis_dma_map_ring,
              &sc->sis_rx_paddr, 0);
  
          if (error) {
                  device_printf(dev, "cannot get address of the rx ring!\n");
                  bus_dmamem_free(sc->sis_rx_tag,
                      sc->sis_rx_list, sc->sis_rx_dmamap);
                  bus_dma_tag_destroy(sc->sis_rx_tag);
                  sc->sis_rx_tag = NULL;
                  goto fail;
          }
  
          error = bus_dma_tag_create(sc->sis_parent_tag,  /* parent */
                          1, 0,                   /* alignment, boundary */
                          BUS_SPACE_MAXADDR,      /* lowaddr */
                          BUS_SPACE_MAXADDR,      /* highaddr */
                          NULL, NULL,             /* filter, filterarg */
                          SIS_TX_LIST_SZ, 1,      /* maxsize,nsegments */
                          BUS_SPACE_MAXSIZE_32BIT,/* maxsegsize */
                          0,                      /* flags */
                          busdma_lock_mutex,      /* lockfunc */
                          &Giant,                 /* lockarg */
                          &sc->sis_tx_tag);
          if (error)
                  goto fail;
  
          error = bus_dmamem_alloc(sc->sis_tx_tag,
              (void **)&sc->sis_tx_list, BUS_DMA_NOWAIT | BUS_DMA_ZERO,
              &sc->sis_tx_dmamap);
  
          if (error) {
                  device_printf(dev, "no memory for tx list buffers!\n");
                  bus_dma_tag_destroy(sc->sis_tx_tag);
                  sc->sis_tx_tag = NULL;
                  goto fail;
          }
  
          error = bus_dmamap_load(sc->sis_tx_tag,
              sc->sis_tx_dmamap, &(sc->sis_tx_list[0]),
              sizeof(struct sis_desc), sis_dma_map_ring,
              &sc->sis_tx_paddr, 0);
  
          if (error) {
                  device_printf(dev, "cannot get address of the tx ring!\n");
                  bus_dmamem_free(sc->sis_tx_tag,
                      sc->sis_tx_list, sc->sis_tx_dmamap);
                  bus_dma_tag_destroy(sc->sis_tx_tag);
                  sc->sis_tx_tag = NULL;
                  goto fail;
          }
  
          error = bus_dma_tag_create(sc->sis_parent_tag,  /* parent */
                          1, 0,                   /* alignment, boundary */
                          BUS_SPACE_MAXADDR,      /* lowaddr */
                          BUS_SPACE_MAXADDR,      /* highaddr */
                          NULL, NULL,             /* filter, filterarg */
                          MCLBYTES, 1,            /* maxsize,nsegments */
                          BUS_SPACE_MAXSIZE_32BIT,/* maxsegsize */
                          0,                      /* flags */
                          busdma_lock_mutex,      /* lockfunc */
                          &Giant,                 /* lockarg */
                          &sc->sis_tag);
          if (error)
                  goto fail;
  
          /*
           * Obtain the physical addresses of the RX and TX
           * rings which we'll need later in the init routine.
           */
  
          ifp = sc->sis_ifp = if_alloc(IFT_ETHER);
          if (ifp == NULL) {
                  device_printf(dev, "can not if_alloc()\n");
                  error = ENOSPC;
                  goto fail;
          }
          ifp->if_softc = sc;
          if_initname(ifp, device_get_name(dev), device_get_unit(dev));
          ifp->if_mtu = ETHERMTU;
          ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
          ifp->if_ioctl = sis_ioctl;
          ifp->if_start = sis_start;
          ifp->if_init = sis_init;
          IFQ_SET_MAXLEN(&ifp->if_snd, SIS_TX_LIST_CNT - 1);
          ifp->if_snd.ifq_drv_maxlen = SIS_TX_LIST_CNT - 1;
          IFQ_SET_READY(&ifp->if_snd);
  
          /*
           * Do MII setup.
           */
          if (mii_phy_probe(dev, &sc->sis_miibus,
              sis_ifmedia_upd, sis_ifmedia_sts)) {
                  device_printf(dev, "MII without any PHY!\n");
                  error = ENXIO;
                  goto fail;
          }
  
          /*
           * Call MI attach routine.
           */
          ether_ifattach(ifp, eaddr);
          
          /*
           * Tell the upper layer(s) we support long frames.
           */
          ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header);
          ifp->if_capabilities |= IFCAP_VLAN_MTU;
          ifp->if_capenable = ifp->if_capabilities;
  #ifdef DEVICE_POLLING
          ifp->if_capabilities |= IFCAP_POLLING;
  #endif
  
          /* Hook interrupt last to avoid having to lock softc */
          error = bus_setup_intr(dev, sc->sis_res[1], INTR_TYPE_NET | INTR_MPSAFE,
              NULL, sis_intr, sc, &sc->sis_intrhand);
  
          if (error) {
                  device_printf(dev, "couldn't set up irq\n");
                  ether_ifdetach(ifp);
                  goto fail;
          }
  
  fail:
          if (error)
                  sis_detach(dev);
  
          return(error);
  }
  
  /*
   * Shutdown hardware and free up resources. This can be called any
   * time after the mutex has been initialized. It is called in both
   * the error case in attach and the normal detach case so it needs
   * to be careful about only freeing resources that have actually been
   * allocated.
   */
  static int
  sis_detach(device_t dev)
  {
          struct sis_softc        *sc;
          struct ifnet            *ifp;
  
          sc = device_get_softc(dev);
          KASSERT(mtx_initialized(&sc->sis_mtx), ("sis mutex not initialized"));
          ifp = sc->sis_ifp;
  
  #ifdef DEVICE_POLLING
          if (ifp->if_capenable & IFCAP_POLLING)
                  ether_poll_deregister(ifp);
  #endif
  
          /* These should only be active if attach succeeded. */
          if (device_is_attached(dev)) {
                  SIS_LOCK(sc);
                  sis_reset(sc);
                  sis_stop(sc);
                  SIS_UNLOCK(sc);
                  callout_drain(&sc->sis_stat_ch);
                  ether_ifdetach(ifp);
          }
          if (sc->sis_miibus)
                  device_delete_child(dev, sc->sis_miibus);
          bus_generic_detach(dev);
  
          if (sc->sis_intrhand)
                  bus_teardown_intr(dev, sc->sis_res[1], sc->sis_intrhand);
          bus_release_resources(dev, sis_res_spec, sc->sis_res);
  
          if (ifp)
                  if_free(ifp);
  
          if (sc->sis_rx_tag) {
                  bus_dmamap_unload(sc->sis_rx_tag,
                      sc->sis_rx_dmamap);
                  bus_dmamem_free(sc->sis_rx_tag,
                      sc->sis_rx_list, sc->sis_rx_dmamap);
                  bus_dma_tag_destroy(sc->sis_rx_tag);
          }
          if (sc->sis_tx_tag) {
                  bus_dmamap_unload(sc->sis_tx_tag,
                      sc->sis_tx_dmamap);
                  bus_dmamem_free(sc->sis_tx_tag,
                      sc->sis_tx_list, sc->sis_tx_dmamap);
                  bus_dma_tag_destroy(sc->sis_tx_tag);
          }
          if (sc->sis_parent_tag)
                  bus_dma_tag_destroy(sc->sis_parent_tag);
          if (sc->sis_tag)
                  bus_dma_tag_destroy(sc->sis_tag);
  
          mtx_destroy(&sc->sis_mtx);
  
          return(0);
  }
  
  /*
   * Initialize the TX and RX descriptors and allocate mbufs for them. Note that
   * we arrange the descriptors in a closed ring, so that the last descriptor
   * points back to the first.
   */
  static int
  sis_ring_init(struct sis_softc *sc)
  {
          int i, error;
          struct sis_desc *dp;
  
          dp = &sc->sis_tx_list[0];
          for (i = 0; i < SIS_TX_LIST_CNT; i++, dp++) {
                  if (i == (SIS_TX_LIST_CNT - 1))
                          dp->sis_nextdesc = &sc->sis_tx_list[0];
                  else
                          dp->sis_nextdesc = dp + 1;
                  bus_dmamap_load(sc->sis_tx_tag,
                      sc->sis_tx_dmamap,
                      dp->sis_nextdesc, sizeof(struct sis_desc),
                      sis_dma_map_desc_next, dp, 0);
                  dp->sis_mbuf = NULL;
                  dp->sis_ptr = 0;
                  dp->sis_ctl = 0;
          }
  
          sc->sis_tx_prod = sc->sis_tx_cons = sc->sis_tx_cnt = 0;
  
          bus_dmamap_sync(sc->sis_tx_tag,
              sc->sis_tx_dmamap, BUS_DMASYNC_PREWRITE);
  
          dp = &sc->sis_rx_list[0];
          for (i = 0; i < SIS_RX_LIST_CNT; i++, dp++) {
                  error = sis_newbuf(sc, dp, NULL);
                  if (error)
                          return(error);
                  if (i == (SIS_RX_LIST_CNT - 1))
                          dp->sis_nextdesc = &sc->sis_rx_list[0];
                  else
                          dp->sis_nextdesc = dp + 1;
                  bus_dmamap_load(sc->sis_rx_tag,
                      sc->sis_rx_dmamap,
                      dp->sis_nextdesc, sizeof(struct sis_desc),
                      sis_dma_map_desc_next, dp, 0);
                  }
  
          bus_dmamap_sync(sc->sis_rx_tag,
              sc->sis_rx_dmamap, BUS_DMASYNC_PREWRITE);
  
          sc->sis_rx_pdsc = &sc->sis_rx_list[0];
  
          return(0);
  }
  
  /*
   * Initialize an RX descriptor and attach an MBUF cluster.
   */
  static int
  sis_newbuf(struct sis_softc *sc, struct sis_desc *c, struct mbuf *m)
  {
  
          if (c == NULL)
                  return(EINVAL);
  
          if (m == NULL) {
                  m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
                  if (m == NULL)
                          return(ENOBUFS);
          } else
                  m->m_data = m->m_ext.ext_buf;
  
          c->sis_mbuf = m;
          c->sis_ctl = SIS_RXLEN;
  
          bus_dmamap_create(sc->sis_tag, 0, &c->sis_map);
          bus_dmamap_load(sc->sis_tag, c->sis_map,
              mtod(m, void *), MCLBYTES,
              sis_dma_map_desc_ptr, c, 0);
          bus_dmamap_sync(sc->sis_tag, c->sis_map, BUS_DMASYNC_PREREAD);
  
          return(0);
  }
  
  /*
   * A frame has been uploaded: pass the resulting mbuf chain up to
   * the higher level protocols.
   */
  static void
  sis_rxeof(struct sis_softc *sc)
  {
          struct mbuf             *m, *m0;
          struct ifnet            *ifp;
          struct sis_desc         *cur_rx;
          int                     total_len = 0;
          u_int32_t               rxstat;
  
          SIS_LOCK_ASSERT(sc);
  
          ifp = sc->sis_ifp;
  
          for(cur_rx = sc->sis_rx_pdsc; SIS_OWNDESC(cur_rx);
              cur_rx = cur_rx->sis_nextdesc) {
  
  #ifdef DEVICE_POLLING
                  if (ifp->if_capenable & IFCAP_POLLING) {
                          if (sc->rxcycles <= 0)
                                  break;
                          sc->rxcycles--;
                  }
  #endif
                  rxstat = cur_rx->sis_rxstat;
                  bus_dmamap_sync(sc->sis_tag,
                      cur_rx->sis_map, BUS_DMASYNC_POSTWRITE);
                  bus_dmamap_unload(sc->sis_tag, cur_rx->sis_map);
                  bus_dmamap_destroy(sc->sis_tag, cur_rx->sis_map);
                  m = cur_rx->sis_mbuf;
                  cur_rx->sis_mbuf = NULL;
                  total_len = SIS_RXBYTES(cur_rx);
  
                  /*
                   * If an error occurs, update stats, clear the
                   * status word and leave the mbuf cluster in place:
                   * it should simply get re-used next time this descriptor
                   * comes up in the ring.
                   */
                  if (!(rxstat & SIS_CMDSTS_PKT_OK)) {
                          ifp->if_ierrors++;
                          if (rxstat & SIS_RXSTAT_COLL)
                                  ifp->if_collisions++;
                          sis_newbuf(sc, cur_rx, m);
                          continue;
                  }
  
                  /* No errors; receive the packet. */    
  #ifdef __NO_STRICT_ALIGNMENT
                  /*
                   * On architectures without alignment problems we try to
                   * allocate a new buffer for the receive ring, and pass up
                   * the one where the packet is already, saving the expensive
                   * copy done in m_devget().
                   * If we are on an architecture with alignment problems, or
                   * if the allocation fails, then use m_devget and leave the
                   * existing buffer in the receive ring.
                   */
                  if (sis_newbuf(sc, cur_rx, NULL) == 0)
                          m->m_pkthdr.len = m->m_len = total_len;
                  else
  #endif
                  {
                          m0 = m_devget(mtod(m, char *), total_len,
                                  ETHER_ALIGN, ifp, NULL);
                          sis_newbuf(sc, cur_rx, m);
                          if (m0 == NULL) {
                                  ifp->if_ierrors++;
                                  continue;
                          }
                          m = m0;
                  }
  
                  ifp->if_ipackets++;
                  m->m_pkthdr.rcvif = ifp;
  
                  SIS_UNLOCK(sc);
                  (*ifp->if_input)(ifp, m);
                  SIS_LOCK(sc);
          }
  
          sc->sis_rx_pdsc = cur_rx;
  }
  
  static void
  sis_rxeoc(struct sis_softc *sc)
  {
  
          SIS_LOCK_ASSERT(sc);
          sis_rxeof(sc);
          sis_initl(sc);
  }
  
  /*
   * A frame was downloaded to the chip. It's safe for us to clean up
   * the list buffers.
   */
  
  static void
  sis_txeof(struct sis_softc *sc)
  {
          struct ifnet            *ifp;
          u_int32_t               idx;
  
          SIS_LOCK_ASSERT(sc);
          ifp = sc->sis_ifp;
  
          /*
           * Go through our tx list and free mbufs for those
           * frames that have been transmitted.
           */
          for (idx = sc->sis_tx_cons; sc->sis_tx_cnt > 0;
              sc->sis_tx_cnt--, SIS_INC(idx, SIS_TX_LIST_CNT) ) {
                  struct sis_desc *cur_tx = &sc->sis_tx_list[idx];
  
                  if (SIS_OWNDESC(cur_tx))
                          break;
  
                  if (cur_tx->sis_ctl & SIS_CMDSTS_MORE)
                          continue;
  
                  if (!(cur_tx->sis_ctl & SIS_CMDSTS_PKT_OK)) {
                          ifp->if_oerrors++;
                          if (cur_tx->sis_txstat & SIS_TXSTAT_EXCESSCOLLS)
                                  ifp->if_collisions++;
                          if (cur_tx->sis_txstat & SIS_TXSTAT_OUTOFWINCOLL)
                                  ifp->if_collisions++;
                  }
  
                  ifp->if_collisions +=
                      (cur_tx->sis_txstat & SIS_TXSTAT_COLLCNT) >> 16;
  
                  ifp->if_opackets++;
                  if (cur_tx->sis_mbuf != NULL) {
                          m_freem(cur_tx->sis_mbuf);
                          cur_tx->sis_mbuf = NULL;
                          bus_dmamap_unload(sc->sis_tag, cur_tx->sis_map);
                          bus_dmamap_destroy(sc->sis_tag, cur_tx->sis_map);
                  }
          }
  
          if (idx != sc->sis_tx_cons) {
                  /* we freed up some buffers */
                  sc->sis_tx_cons = idx;
                  ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
          }
  
          sc->sis_watchdog_timer = (sc->sis_tx_cnt == 0) ? 0 : 5;
  
          return;
  }
  
  static void
  sis_tick(void *xsc)
  {
          struct sis_softc        *sc;
          struct mii_data         *mii;
          struct ifnet            *ifp;
  
          sc = xsc;
          SIS_LOCK_ASSERT(sc);
          sc->in_tick = 1;
          ifp = sc->sis_ifp;
  
          mii = device_get_softc(sc->sis_miibus);
          mii_tick(mii);
  
          sis_watchdog(sc);
  
          if (!sc->sis_link && mii->mii_media_status & IFM_ACTIVE &&
              IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) {
                  sc->sis_link++;
                  if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
                          sis_startl(ifp);
          }
  
          callout_reset(&sc->sis_stat_ch, hz,  sis_tick, sc);
          sc->in_tick = 0;
  }
  
  #ifdef DEVICE_POLLING
  static poll_handler_t sis_poll;
  
  static void
  sis_poll(struct ifnet *ifp, enum poll_cmd cmd, int count)
  {
          struct  sis_softc *sc = ifp->if_softc;
  
          SIS_LOCK(sc);
          if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) {
                  SIS_UNLOCK(sc);
                  return;
          }
  
          /*
           * On the sis, reading the status register also clears it.
           * So before returning to intr mode we must make sure that all
           * possible pending sources of interrupts have been served.
           * In practice this means run to completion the *eof routines,
           * and then call the interrupt routine
           */
          sc->rxcycles = count;
          sis_rxeof(sc);
          sis_txeof(sc);
          if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
                  sis_startl(ifp);
  
          if (sc->rxcycles > 0 || cmd == POLL_AND_CHECK_STATUS) {
                  u_int32_t       status;
  
                  /* Reading the ISR register clears all interrupts. */
                  status = CSR_READ_4(sc, SIS_ISR);
  
                  if (status & (SIS_ISR_RX_ERR|SIS_ISR_RX_OFLOW))
                          sis_rxeoc(sc);
  
                  if (status & (SIS_ISR_RX_IDLE))
                          SIS_SETBIT(sc, SIS_CSR, SIS_CSR_RX_ENABLE);
  
                  if (status & SIS_ISR_SYSERR) {
                          sis_reset(sc);
                          sis_initl(sc);
                  }
          }
  
          SIS_UNLOCK(sc);
  }
  #endif /* DEVICE_POLLING */
  
  static void
  sis_intr(void *arg)
  {
          struct sis_softc        *sc;
          struct ifnet            *ifp;
          u_int32_t               status;
  
          sc = arg;
          ifp = sc->sis_ifp;
  
          if (sc->sis_stopped)    /* Most likely shared interrupt */
                  return;
  
          SIS_LOCK(sc);
  #ifdef DEVICE_POLLING
          if (ifp->if_capenable & IFCAP_POLLING) {
                  SIS_UNLOCK(sc);
                  return;
          }
  #endif
  
          /* Disable interrupts. */
          CSR_WRITE_4(sc, SIS_IER, 0);
  
          for (;;) {
                  SIS_LOCK_ASSERT(sc);
                  /* Reading the ISR register clears all interrupts. */
                  status = CSR_READ_4(sc, SIS_ISR);
  
                  if ((status & SIS_INTRS) == 0)
                          break;
  
                  if (status &
                      (SIS_ISR_TX_DESC_OK | SIS_ISR_TX_ERR |
                       SIS_ISR_TX_OK | SIS_ISR_TX_IDLE) )
                          sis_txeof(sc);
  
                  if (status & (SIS_ISR_RX_DESC_OK|SIS_ISR_RX_OK|SIS_ISR_RX_IDLE))
                          sis_rxeof(sc);
  
                  if (status & (SIS_ISR_RX_ERR | SIS_ISR_RX_OFLOW))
                          sis_rxeoc(sc);
  
                  if (status & (SIS_ISR_RX_IDLE))
                          SIS_SETBIT(sc, SIS_CSR, SIS_CSR_RX_ENABLE);
  
                  if (status & SIS_ISR_SYSERR) {
                          sis_reset(sc);
                          sis_initl(sc);
                  }
          }
  
          /* Re-enable interrupts. */
          CSR_WRITE_4(sc, SIS_IER, 1);
  
          if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
                  sis_startl(ifp);
  
          SIS_UNLOCK(sc);
  }
  
  /*
   * Encapsulate an mbuf chain in a descriptor by coupling the mbuf data
   * pointers to the fragment pointers.
   */
  static int
  sis_encap(struct sis_softc *sc, struct mbuf **m_head, uint32_t *txidx)
  {
          struct sis_desc         *f = NULL;
          struct mbuf             *m;
          int                     frag, cur, cnt = 0, chainlen = 0;
  
          /*
           * If there's no way we can send any packets, return now.
           */
          if (SIS_TX_LIST_CNT - sc->sis_tx_cnt < 2)
                  return (ENOBUFS);
  
          /*
           * Count the number of frags in this chain to see if
           * we need to m_defrag.  Since the descriptor list is shared
           * by all packets, we'll m_defrag long chains so that they
           * do not use up the entire list, even if they would fit.
           */
  
          for (m = *m_head; m != NULL; m = m->m_next)
                  chainlen++;
  
          if ((chainlen > SIS_TX_LIST_CNT / 4) ||
              ((SIS_TX_LIST_CNT - (chainlen + sc->sis_tx_cnt)) < 2)) {
                  m = m_defrag(*m_head, M_DONTWAIT);
                  if (m == NULL)
                          return (ENOBUFS);
                  *m_head = m;
          }
          
          /*
           * Start packing the mbufs in this chain into
           * the fragment pointers. Stop when we run out
           * of fragments or hit the end of the mbuf chain.
           */
          cur = frag = *txidx;
  
          for (m = *m_head; m != NULL; m = m->m_next) {
                  if (m->m_len != 0) {
                          if ((SIS_TX_LIST_CNT -
                              (sc->sis_tx_cnt + cnt)) < 2)
                                  return(ENOBUFS);
                          f = &sc->sis_tx_list[frag];
                          f->sis_ctl = SIS_CMDSTS_MORE | m->m_len;
                          bus_dmamap_create(sc->sis_tag, 0, &f->sis_map);
                          bus_dmamap_load(sc->sis_tag, f->sis_map,
                              mtod(m, void *), m->m_len,
                              sis_dma_map_desc_ptr, f, 0);
                          bus_dmamap_sync(sc->sis_tag,
                              f->sis_map, BUS_DMASYNC_PREREAD);
                          if (cnt != 0)
                                  f->sis_ctl |= SIS_CMDSTS_OWN;
                          cur = frag;
                          SIS_INC(frag, SIS_TX_LIST_CNT);
                          cnt++;
                  }
          }
  
          if (m != NULL)
                  return(ENOBUFS);
  
          sc->sis_tx_list[cur].sis_mbuf = *m_head;
          sc->sis_tx_list[cur].sis_ctl &= ~SIS_CMDSTS_MORE;
          sc->sis_tx_list[*txidx].sis_ctl |= SIS_CMDSTS_OWN;
          sc->sis_tx_cnt += cnt;
          *txidx = frag;
  
          return(0);
  }
  
  /*
   * Main transmit routine. To avoid having to do mbuf copies, we put pointers
   * to the mbuf data regions directly in the transmit lists. We also save a
   * copy of the pointers since the transmit list fragment pointers are
   * physical addresses.
   */
  
  static void
  sis_start(struct ifnet *ifp)
  {
          struct sis_softc        *sc;
  
          sc = ifp->if_softc;
          SIS_LOCK(sc);
          sis_startl(ifp);
          SIS_UNLOCK(sc);
  }
  
  static void
  sis_startl(struct ifnet *ifp)
  {
          struct sis_softc        *sc;
          struct mbuf             *m_head = NULL;
          u_int32_t               idx, queued = 0;
  
          sc = ifp->if_softc;
  
          SIS_LOCK_ASSERT(sc);
  
          if (!sc->sis_link)
                  return;
  
          idx = sc->sis_tx_prod;
  
          if (ifp->if_drv_flags & IFF_DRV_OACTIVE)
                  return;
  
          while(sc->sis_tx_list[idx].sis_mbuf == NULL) {
                  IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head);
                  if (m_head == NULL)
                          break;
  
                  if (sis_encap(sc, &m_head, &idx)) {
                          IFQ_DRV_PREPEND(&ifp->if_snd, m_head);
                          ifp->if_drv_flags |= IFF_DRV_OACTIVE;
                          break;
                  }
  
                  queued++;
  
                  /*
                   * If there's a BPF listener, bounce a copy of this frame
                   * to him.
                   */
                  BPF_MTAP(ifp, m_head);
  
          }
  
          if (queued) {
                  /* Transmit */
                  sc->sis_tx_prod = idx;
                  SIS_SETBIT(sc, SIS_CSR, SIS_CSR_TX_ENABLE);
  
                  /*
                   * Set a timeout in case the chip goes out to lunch.
                   */
                  sc->sis_watchdog_timer = 5;
          }
  }
  
  static void
  sis_init(void *xsc)
  {
          struct sis_softc        *sc = xsc;
  
          SIS_LOCK(sc);
          sis_initl(sc);
          SIS_UNLOCK(sc);
  }
  
  static void
  sis_initl(struct sis_softc *sc)
  {
          struct ifnet            *ifp = sc->sis_ifp;
          struct mii_data         *mii;
  
          SIS_LOCK_ASSERT(sc);
  
          /*
           * Cancel pending I/O and free all RX/TX buffers.
           */
          sis_stop(sc);
          sc->sis_stopped = 0;
  
  #ifdef notyet
          if (sc->sis_type == SIS_TYPE_83815 && sc->sis_srr >= NS_SRR_16A) {
                  /*
                   * Configure 400usec of interrupt holdoff.  This is based
                   * on emperical tests on a Soekris 4801.
                   */
                  CSR_WRITE_4(sc, NS_IHR, 0x100 | 4);
          }
  #endif
  
          mii = device_get_softc(sc->sis_miibus);
  
          /* Set MAC address */
          if (sc->sis_type == SIS_TYPE_83815) {
                  CSR_WRITE_4(sc, SIS_RXFILT_CTL, NS_FILTADDR_PAR0);
                  CSR_WRITE_4(sc, SIS_RXFILT_DATA,
                      ((u_int16_t *)IF_LLADDR(sc->sis_ifp))[0]);
                  CSR_WRITE_4(sc, SIS_RXFILT_CTL, NS_FILTADDR_PAR1);
                  CSR_WRITE_4(sc, SIS_RXFILT_DATA,
                      ((u_int16_t *)IF_LLADDR(sc->sis_ifp))[1]);
                  CSR_WRITE_4(sc, SIS_RXFILT_CTL, NS_FILTADDR_PAR2);
                  CSR_WRITE_4(sc, SIS_RXFILT_DATA,
                      ((u_int16_t *)IF_LLADDR(sc->sis_ifp))[2]);
          } else {
                  CSR_WRITE_4(sc, SIS_RXFILT_CTL, SIS_FILTADDR_PAR0);
                  CSR_WRITE_4(sc, SIS_RXFILT_DATA,
                      ((u_int16_t *)IF_LLADDR(sc->sis_ifp))[0]);
                  CSR_WRITE_4(sc, SIS_RXFILT_CTL, SIS_FILTADDR_PAR1);
                  CSR_WRITE_4(sc, SIS_RXFILT_DATA,
                      ((u_int16_t *)IF_LLADDR(sc->sis_ifp))[1]);
                  CSR_WRITE_4(sc, SIS_RXFILT_CTL, SIS_FILTADDR_PAR2);
                  CSR_WRITE_4(sc, SIS_RXFILT_DATA,
                      ((u_int16_t *)IF_LLADDR(sc->sis_ifp))[2]);
          }
  
          /* Init circular TX/RX lists. */
          if (sis_ring_init(sc) != 0) {
                  device_printf(sc->sis_dev,
                      "initialization failed: no memory for rx buffers\n");
                  sis_stop(sc);
                  return;
          }
  
          /*
           * Short Cable Receive Errors (MP21.E)
           * also: Page 78 of the DP83815 data sheet (september 2002 version)
           * recommends the following register settings "for optimum
           * performance." for rev 15C.  Set this also for 15D parts as
           * they require it in practice.
           */
          if (sc->sis_type == SIS_TYPE_83815 && sc->sis_srr <= NS_SRR_15D) {
                  CSR_WRITE_4(sc, NS_PHY_PAGE, 0x0001);
                  CSR_WRITE_4(sc, NS_PHY_CR, 0x189C);
                  /* set val for c2 */
                  CSR_WRITE_4(sc, NS_PHY_TDATA, 0x0000);
                  /* load/kill c2 */
                  CSR_WRITE_4(sc, NS_PHY_DSPCFG, 0x5040);
                  /* rais SD off, from 4 to c */
                  CSR_WRITE_4(sc, NS_PHY_SDCFG, 0x008C);
                  CSR_WRITE_4(sc, NS_PHY_PAGE, 0);
          }
  
  
          /*
           * For the NatSemi chip, we have to explicitly enable the
           * reception of ARP frames, as well as turn on the 'perfect
           * match' filter where we store the station address, otherwise
           * we won't receive unicasts meant for this host.
           */
          if (sc->sis_type == SIS_TYPE_83815) {
                  SIS_SETBIT(sc, SIS_RXFILT_CTL, NS_RXFILTCTL_ARP);
                  SIS_SETBIT(sc, SIS_RXFILT_CTL, NS_RXFILTCTL_PERFECT);
          }
  
           /* If we want promiscuous mode, set the allframes bit. */
          if (ifp->if_flags & IFF_PROMISC) {
                  SIS_SETBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_ALLPHYS);
          } else {
                  SIS_CLRBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_ALLPHYS);
          }
  
          /*
           * Set the capture broadcast bit to capture broadcast frames.
           */
          if (ifp->if_flags & IFF_BROADCAST) {
                  SIS_SETBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_BROAD);
          } else {
                  SIS_CLRBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_BROAD);
          }
  
          /*
           * Load the multicast filter.
           */
          if (sc->sis_type == SIS_TYPE_83815)
                  sis_setmulti_ns(sc);
          else
                  sis_setmulti_sis(sc);
  
          /* Turn the receive filter on */
          SIS_SETBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_ENABLE);
  
          /*
           * Load the address of the RX and TX lists.
           */
          CSR_WRITE_4(sc, SIS_RX_LISTPTR, sc->sis_rx_paddr);
          CSR_WRITE_4(sc, SIS_TX_LISTPTR, sc->sis_tx_paddr);
  
          /* SIS_CFG_EDB_MASTER_EN indicates the EDB bus is used instead of
           * the PCI bus. When this bit is set, the Max DMA Burst Size
           * for TX/RX DMA should be no larger than 16 double words.
           */
          if (CSR_READ_4(sc, SIS_CFG) & SIS_CFG_EDB_MASTER_EN) {
                  CSR_WRITE_4(sc, SIS_RX_CFG, SIS_RXCFG64);
          } else {
                  CSR_WRITE_4(sc, SIS_RX_CFG, SIS_RXCFG256);
          }
  
          /* Accept Long Packets for VLAN support */
          SIS_SETBIT(sc, SIS_RX_CFG, SIS_RXCFG_RX_JABBER);
  
          /* Set TX configuration */
          if (IFM_SUBTYPE(mii->mii_media_active) == IFM_10_T) {
                  CSR_WRITE_4(sc, SIS_TX_CFG, SIS_TXCFG_10);
          } else {
                  CSR_WRITE_4(sc, SIS_TX_CFG, SIS_TXCFG_100);
          }
  
          /* Set full/half duplex mode. */
          if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) {
                  SIS_SETBIT(sc, SIS_TX_CFG,
                      (SIS_TXCFG_IGN_HBEAT|SIS_TXCFG_IGN_CARR));
                  SIS_SETBIT(sc, SIS_RX_CFG, SIS_RXCFG_RX_TXPKTS);
          } else {
                  SIS_CLRBIT(sc, SIS_TX_CFG,
                      (SIS_TXCFG_IGN_HBEAT|SIS_TXCFG_IGN_CARR));
                  SIS_CLRBIT(sc, SIS_RX_CFG, SIS_RXCFG_RX_TXPKTS);
          }
  
          if (sc->sis_type == SIS_TYPE_83816) {
                  /*
                   * MPII03.D: Half Duplex Excessive Collisions.
                   * Also page 49 in 83816 manual
                   */
                  SIS_SETBIT(sc, SIS_TX_CFG, SIS_TXCFG_MPII03D);
          }
  
          if (sc->sis_type == SIS_TYPE_83815 && sc->sis_srr < NS_SRR_16A &&
               IFM_SUBTYPE(mii->mii_media_active) == IFM_100_TX) {
                  uint32_t reg;
  
                  /*
                   * Short Cable Receive Errors (MP21.E) 
                   */
                  CSR_WRITE_4(sc, NS_PHY_PAGE, 0x0001);
                  reg = CSR_READ_4(sc, NS_PHY_DSPCFG) & 0xfff;
                  CSR_WRITE_4(sc, NS_PHY_DSPCFG, reg | 0x1000);
                  DELAY(100000);
                  reg = CSR_READ_4(sc, NS_PHY_TDATA) & 0xff;
                  if ((reg & 0x0080) == 0 || (reg > 0xd8 && reg <= 0xff)) {
                          device_printf(sc->sis_dev,
                              "Applying short cable fix (reg=%x)\n", reg);
                          CSR_WRITE_4(sc, NS_PHY_TDATA, 0x00e8);
                          SIS_SETBIT(sc, NS_PHY_DSPCFG, 0x20);
                  }
                  CSR_WRITE_4(sc, NS_PHY_PAGE, 0);
          }
  
          /*
           * Enable interrupts.
           */
          CSR_WRITE_4(sc, SIS_IMR, SIS_INTRS);
  #ifdef DEVICE_POLLING
          /*
           * ... only enable interrupts if we are not polling, make sure
           * they are off otherwise.
           */
          if (ifp->if_capenable & IFCAP_POLLING)
                  CSR_WRITE_4(sc, SIS_IER, 0);
          else
  #endif
          CSR_WRITE_4(sc, SIS_IER, 1);
  
          /* Enable receiver and transmitter. */
          SIS_CLRBIT(sc, SIS_CSR, SIS_CSR_TX_DISABLE|SIS_CSR_RX_DISABLE);
          SIS_SETBIT(sc, SIS_CSR, SIS_CSR_RX_ENABLE);
  
  #ifdef notdef
          mii_mediachg(mii);
  #endif
  
          ifp->if_drv_flags |= IFF_DRV_RUNNING;
          ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
  
          if (!sc->in_tick)
                  callout_reset(&sc->sis_stat_ch, hz,  sis_tick, sc);
  }
  
  /*
   * Set media options.
   */
  static int
  sis_ifmedia_upd(struct ifnet *ifp)
  {
          struct sis_softc        *sc;
          struct mii_data         *mii;
  
          sc = ifp->if_softc;
  
          SIS_LOCK(sc);
          mii = device_get_softc(sc->sis_miibus);
          sc->sis_link = 0;
          if (mii->mii_instance) {
                  struct mii_softc        *miisc;
                  LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
                          mii_phy_reset(miisc);
          }
          mii_mediachg(mii);
          SIS_UNLOCK(sc);
  
          return(0);
  }
  
  /*
   * Report current media status.
   */
  static void
  sis_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
  {
          struct sis_softc        *sc;
          struct mii_data         *mii;
  
          sc = ifp->if_softc;
  
          SIS_LOCK(sc);
          mii = device_get_softc(sc->sis_miibus);
          mii_pollstat(mii);
          SIS_UNLOCK(sc);
          ifmr->ifm_active = mii->mii_media_active;
          ifmr->ifm_status = mii->mii_media_status;
  }
  
  static int
  sis_ioctl(struct ifnet *ifp, u_long command, caddr_t data)
  {
          struct sis_softc        *sc = ifp->if_softc;
          struct ifreq            *ifr = (struct ifreq *) data;
          struct mii_data         *mii;
          int                     error = 0;
  
          switch(command) {
          case SIOCSIFFLAGS:
                  SIS_LOCK(sc);
                  if (ifp->if_flags & IFF_UP) {
                          sis_initl(sc);
                  } else if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
                          sis_stop(sc);
                  }
                  SIS_UNLOCK(sc);
                  error = 0;
                  break;
          case SIOCADDMULTI:
          case SIOCDELMULTI:
                  SIS_LOCK(sc);
                  if (sc->sis_type == SIS_TYPE_83815)
                          sis_setmulti_ns(sc);
                  else
                          sis_setmulti_sis(sc);
                  SIS_UNLOCK(sc);
                  error = 0;
                  break;
          case SIOCGIFMEDIA:
          case SIOCSIFMEDIA:
                  mii = device_get_softc(sc->sis_miibus);
                  error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command);
                  break;
          case SIOCSIFCAP:
                  /* ok, disable interrupts */
  #ifdef DEVICE_POLLING
                  if (ifr->ifr_reqcap & IFCAP_POLLING &&
                      !(ifp->if_capenable & IFCAP_POLLING)) {
                          error = ether_poll_register(sis_poll, ifp);
                          if (error)
                                  return(error);
                          SIS_LOCK(sc);
                          /* Disable interrupts */
                          CSR_WRITE_4(sc, SIS_IER, 0);
                          ifp->if_capenable |= IFCAP_POLLING;
                          SIS_UNLOCK(sc);
                          return (error);
                          
                  }
                  if (!(ifr->ifr_reqcap & IFCAP_POLLING) &&
                      ifp->if_capenable & IFCAP_POLLING) {
                          error = ether_poll_deregister(ifp);
                          /* Enable interrupts. */
                          SIS_LOCK(sc);
                          CSR_WRITE_4(sc, SIS_IER, 1);
                          ifp->if_capenable &= ~IFCAP_POLLING;
                          SIS_UNLOCK(sc);
                          return (error);
                  }
  #endif /* DEVICE_POLLING */
                  break;
          default:
                  error = ether_ioctl(ifp, command, data);
                  break;
          }
  
          return(error);
  }
  
  static void
  sis_watchdog(struct sis_softc *sc)
  {
  
          SIS_LOCK_ASSERT(sc);
          if (sc->sis_stopped) {
                  SIS_UNLOCK(sc);
                  return;
          }
  
          if (sc->sis_watchdog_timer == 0 || --sc->sis_watchdog_timer >0)
                  return;
  
          device_printf(sc->sis_dev, "watchdog timeout\n");
          sc->sis_ifp->if_oerrors++;
  
          sis_stop(sc);
          sis_reset(sc);
          sis_initl(sc);
  
          if (!IFQ_DRV_IS_EMPTY(&sc->sis_ifp->if_snd))
                  sis_startl(sc->sis_ifp);
  }
  
  /*
   * Stop the adapter and free any mbufs allocated to the
   * RX and TX lists.
   */
  static void
  sis_stop(struct sis_softc *sc)
  {
          int i;
          struct ifnet *ifp;
          struct sis_desc *dp;
  
          if (sc->sis_stopped)
                  return;
          SIS_LOCK_ASSERT(sc);
          ifp = sc->sis_ifp;
          sc->sis_watchdog_timer = 0;
  
          callout_stop(&sc->sis_stat_ch);
  
          ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
          CSR_WRITE_4(sc, SIS_IER, 0);
          CSR_WRITE_4(sc, SIS_IMR, 0);
          CSR_READ_4(sc, SIS_ISR); /* clear any interrupts already pending */
          SIS_SETBIT(sc, SIS_CSR, SIS_CSR_TX_DISABLE|SIS_CSR_RX_DISABLE);
          DELAY(1000);
          CSR_WRITE_4(sc, SIS_TX_LISTPTR, 0);
          CSR_WRITE_4(sc, SIS_RX_LISTPTR, 0);
  
          sc->sis_link = 0;
  
          /*
           * Free data in the RX lists.
           */
          dp = &sc->sis_rx_list[0];
          for (i = 0; i < SIS_RX_LIST_CNT; i++, dp++) {
                  if (dp->sis_mbuf == NULL)
                          continue;
                  bus_dmamap_unload(sc->sis_tag, dp->sis_map);
                  bus_dmamap_destroy(sc->sis_tag, dp->sis_map);
                  m_freem(dp->sis_mbuf);
                  dp->sis_mbuf = NULL;
          }
          bzero(sc->sis_rx_list, SIS_RX_LIST_SZ);
  
          /*
           * Free the TX list buffers.
           */
          dp = &sc->sis_tx_list[0];
          for (i = 0; i < SIS_TX_LIST_CNT; i++, dp++) {
                  if (dp->sis_mbuf == NULL)
                          continue;
                  bus_dmamap_unload(sc->sis_tag, dp->sis_map);
                  bus_dmamap_destroy(sc->sis_tag, dp->sis_map);
                  m_freem(dp->sis_mbuf);
                  dp->sis_mbuf = NULL;
          }
  
          bzero(sc->sis_tx_list, SIS_TX_LIST_SZ);
  
          sc->sis_stopped = 1;
  }
  
  /*
   * Stop all chip I/O so that the kernel's probe routines don't
   * get confused by errant DMAs when rebooting.
   */
  static void
  sis_shutdown(device_t dev)
  {
          struct sis_softc        *sc;
  
          sc = device_get_softc(dev);
          SIS_LOCK(sc);
          sis_reset(sc);
          sis_stop(sc);
          SIS_UNLOCK(sc);
  }
  
  static device_method_t sis_methods[] = {
          /* Device interface */
          DEVMETHOD(device_probe,         sis_probe),
          DEVMETHOD(device_attach,        sis_attach),
          DEVMETHOD(device_detach,        sis_detach),
          DEVMETHOD(device_shutdown,      sis_shutdown),
  
          /* bus interface */
          DEVMETHOD(bus_print_child,      bus_generic_print_child),
          DEVMETHOD(bus_driver_added,     bus_generic_driver_added),
  
          /* MII interface */
          DEVMETHOD(miibus_readreg,       sis_miibus_readreg),
          DEVMETHOD(miibus_writereg,      sis_miibus_writereg),
          DEVMETHOD(miibus_statchg,       sis_miibus_statchg),
  
          { 0, 0 }
  };
  
  static driver_t sis_driver = {
          "sis",
          sis_methods,
          sizeof(struct sis_softc)
  };
  
  static devclass_t sis_devclass;
  
  DRIVER_MODULE(sis, pci, sis_driver, sis_devclass, 0, 0);
  DRIVER_MODULE(miibus, sis, miibus_driver, miibus_devclass, 0, 0);

Cache object: bf20588577cc3392a69ecac1059ac920