FreeBSD/Linux Kernel Cross Reference
sys/rpc/clnt.h
1 /* $NetBSD: clnt.h,v 1.14 2000/06/02 22:57:55 fvdl Exp $ */
2
3 /*-
4 * Copyright (c) 2010, Oracle America, Inc.
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions are met:
9 * - Redistributions of source code must retain the above copyright notice,
10 * this list of conditions and the following disclaimer.
11 * - Redistributions in binary form must reproduce the above copyright notice,
12 * this list of conditions and the following disclaimer in the documentation
13 * and/or other materials provided with the distribution.
14 * - Neither the name of the "Oracle America, Inc." nor the names of its
15 * contributors may be used to endorse or promote products derived
16 * from this software without specific prior written permission.
17 *
18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
22 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
23 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
24 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
25 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
26 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
28 * POSSIBILITY OF SUCH DAMAGE.
29 *
30 * from: @(#)clnt.h 1.31 94/04/29 SMI
31 * from: @(#)clnt.h 2.1 88/07/29 4.0 RPCSRC
32 * $FreeBSD$
33 */
34
35 /*
36 * clnt.h - Client side remote procedure call interface.
37 *
38 * Copyright (c) 1986-1991,1994-1999 by Sun Microsystems, Inc.
39 * All rights reserved.
40 */
41
42 #ifndef _RPC_CLNT_H_
43 #define _RPC_CLNT_H_
44 #include <rpc/clnt_stat.h>
45 #include <sys/cdefs.h>
46 #ifdef _KERNEL
47 #include <sys/refcount.h>
48 #include <rpc/netconfig.h>
49 #else
50 #include <netconfig.h>
51 #endif
52 #include <sys/un.h>
53
54 /*
55 * Well-known IPV6 RPC broadcast address.
56 */
57 #define RPCB_MULTICAST_ADDR "ff02::202"
58
59 /*
60 * the following errors are in general unrecoverable. The caller
61 * should give up rather than retry.
62 */
63 #define IS_UNRECOVERABLE_RPC(s) (((s) == RPC_AUTHERROR) || \
64 ((s) == RPC_CANTENCODEARGS) || \
65 ((s) == RPC_CANTDECODERES) || \
66 ((s) == RPC_VERSMISMATCH) || \
67 ((s) == RPC_PROCUNAVAIL) || \
68 ((s) == RPC_PROGUNAVAIL) || \
69 ((s) == RPC_PROGVERSMISMATCH) || \
70 ((s) == RPC_CANTDECODEARGS))
71
72 /*
73 * Error info.
74 */
75 struct rpc_err {
76 enum clnt_stat re_status;
77 union {
78 int RE_errno; /* related system error */
79 enum auth_stat RE_why; /* why the auth error occurred */
80 struct {
81 rpcvers_t low; /* lowest version supported */
82 rpcvers_t high; /* highest version supported */
83 } RE_vers;
84 struct { /* maybe meaningful if RPC_FAILED */
85 int32_t s1;
86 int32_t s2;
87 } RE_lb; /* life boot & debugging only */
88 } ru;
89 #define re_errno ru.RE_errno
90 #define re_why ru.RE_why
91 #define re_vers ru.RE_vers
92 #define re_lb ru.RE_lb
93 };
94
95 #ifdef _KERNEL
96 /*
97 * Functions of this type may be used to receive notification when RPC
98 * calls have to be re-transmitted etc.
99 */
100 typedef void rpc_feedback(int cmd, int procnum, void *);
101
102 /*
103 * Timers used for the pseudo-transport protocol when using datagrams
104 */
105 struct rpc_timers {
106 u_short rt_srtt; /* smoothed round-trip time */
107 u_short rt_deviate; /* estimated deviation */
108 u_long rt_rtxcur; /* current (backed-off) rto */
109 };
110
111 /*
112 * A structure used with CLNT_CALL_EXT to pass extra information used
113 * while processing an RPC call.
114 */
115 struct rpc_callextra {
116 AUTH *rc_auth; /* auth handle to use for this call */
117 rpc_feedback *rc_feedback; /* callback for retransmits etc. */
118 void *rc_feedback_arg; /* argument for callback */
119 struct rpc_timers *rc_timers; /* optional RTT timers */
120 struct rpc_err rc_err; /* detailed call status */
121 };
122 #endif
123
124 /*
125 * Client rpc handle.
126 * Created by individual implementations
127 * Client is responsible for initializing auth, see e.g. auth_none.c.
128 */
129 typedef struct __rpc_client {
130 #ifdef _KERNEL
131 volatile u_int cl_refs; /* reference count */
132 AUTH *cl_auth; /* authenticator */
133 struct clnt_ops {
134 /* call remote procedure */
135 enum clnt_stat (*cl_call)(struct __rpc_client *,
136 struct rpc_callextra *, rpcproc_t,
137 struct mbuf *, struct mbuf **, struct timeval);
138 /* abort a call */
139 void (*cl_abort)(struct __rpc_client *);
140 /* get specific error code */
141 void (*cl_geterr)(struct __rpc_client *,
142 struct rpc_err *);
143 /* frees results */
144 bool_t (*cl_freeres)(struct __rpc_client *,
145 xdrproc_t, void *);
146 /* close the connection and terminate pending RPCs */
147 void (*cl_close)(struct __rpc_client *);
148 /* destroy this structure */
149 void (*cl_destroy)(struct __rpc_client *);
150 /* the ioctl() of rpc */
151 bool_t (*cl_control)(struct __rpc_client *, u_int,
152 void *);
153 } *cl_ops;
154 #else
155 AUTH *cl_auth; /* authenticator */
156 struct clnt_ops {
157 /* call remote procedure */
158 enum clnt_stat (*cl_call)(struct __rpc_client *,
159 rpcproc_t, xdrproc_t, void *, xdrproc_t,
160 void *, struct timeval);
161 /* abort a call */
162 void (*cl_abort)(struct __rpc_client *);
163 /* get specific error code */
164 void (*cl_geterr)(struct __rpc_client *,
165 struct rpc_err *);
166 /* frees results */
167 bool_t (*cl_freeres)(struct __rpc_client *,
168 xdrproc_t, void *);
169 /* destroy this structure */
170 void (*cl_destroy)(struct __rpc_client *);
171 /* the ioctl() of rpc */
172 bool_t (*cl_control)(struct __rpc_client *, u_int,
173 void *);
174 } *cl_ops;
175 #endif
176 void *cl_private; /* private stuff */
177 char *cl_netid; /* network token */
178 char *cl_tp; /* device name */
179 } CLIENT;
180
181 /*
182 * Feedback values used for possible congestion and rate control
183 */
184 #define FEEDBACK_OK 1 /* no retransmits */
185 #define FEEDBACK_REXMIT1 2 /* first retransmit */
186 #define FEEDBACK_REXMIT2 3 /* second and subsequent retransmit */
187 #define FEEDBACK_RECONNECT 4 /* client reconnect */
188
189 /* Used to set version of portmapper used in broadcast */
190
191 #define CLCR_SET_LOWVERS 3
192 #define CLCR_GET_LOWVERS 4
193
194 #define RPCSMALLMSGSIZE 400 /* a more reasonable packet size */
195
196 /*
197 * client side rpc interface ops
198 *
199 * Parameter types are:
200 *
201 */
202
203 #ifdef _KERNEL
204 #define CLNT_ACQUIRE(rh) \
205 refcount_acquire(&(rh)->cl_refs)
206 #define CLNT_RELEASE(rh) \
207 if (refcount_release(&(rh)->cl_refs)) \
208 CLNT_DESTROY(rh)
209
210 /*
211 * void
212 * CLNT_CLOSE(rh);
213 * CLIENT *rh;
214 */
215 #define CLNT_CLOSE(rh) ((*(rh)->cl_ops->cl_close)(rh))
216
217 enum clnt_stat clnt_call_private(CLIENT *, struct rpc_callextra *, rpcproc_t,
218 xdrproc_t, void *, xdrproc_t, void *, struct timeval);
219
220 /*
221 * enum clnt_stat
222 * CLNT_CALL_MBUF(rh, ext, proc, mreq, mrepp, timeout)
223 * CLIENT *rh;
224 * struct rpc_callextra *ext;
225 * rpcproc_t proc;
226 * struct mbuf *mreq;
227 * struct mbuf **mrepp;
228 * struct timeval timeout;
229 *
230 * Call arguments in mreq which is consumed by the call (even if there
231 * is an error). Results returned in *mrepp.
232 */
233 #define CLNT_CALL_MBUF(rh, ext, proc, mreq, mrepp, secs) \
234 ((*(rh)->cl_ops->cl_call)(rh, ext, proc, mreq, mrepp, secs))
235
236 /*
237 * enum clnt_stat
238 * CLNT_CALL_EXT(rh, ext, proc, xargs, argsp, xres, resp, timeout)
239 * CLIENT *rh;
240 * struct rpc_callextra *ext;
241 * rpcproc_t proc;
242 * xdrproc_t xargs;
243 * void *argsp;
244 * xdrproc_t xres;
245 * void *resp;
246 * struct timeval timeout;
247 */
248 #define CLNT_CALL_EXT(rh, ext, proc, xargs, argsp, xres, resp, secs) \
249 clnt_call_private(rh, ext, proc, xargs, \
250 argsp, xres, resp, secs)
251 #endif
252
253 /*
254 * enum clnt_stat
255 * CLNT_CALL(rh, proc, xargs, argsp, xres, resp, timeout)
256 * CLIENT *rh;
257 * rpcproc_t proc;
258 * xdrproc_t xargs;
259 * void *argsp;
260 * xdrproc_t xres;
261 * void *resp;
262 * struct timeval timeout;
263 */
264 #ifdef _KERNEL
265 #define CLNT_CALL(rh, proc, xargs, argsp, xres, resp, secs) \
266 clnt_call_private(rh, NULL, proc, xargs, \
267 argsp, xres, resp, secs)
268 #define clnt_call(rh, proc, xargs, argsp, xres, resp, secs) \
269 clnt_call_private(rh, NULL, proc, xargs, \
270 argsp, xres, resp, secs)
271 #else
272 #define CLNT_CALL(rh, proc, xargs, argsp, xres, resp, secs) \
273 ((*(rh)->cl_ops->cl_call)(rh, proc, xargs, \
274 argsp, xres, resp, secs))
275 #define clnt_call(rh, proc, xargs, argsp, xres, resp, secs) \
276 ((*(rh)->cl_ops->cl_call)(rh, proc, xargs, \
277 argsp, xres, resp, secs))
278 #endif
279
280 /*
281 * void
282 * CLNT_ABORT(rh);
283 * CLIENT *rh;
284 */
285 #define CLNT_ABORT(rh) ((*(rh)->cl_ops->cl_abort)(rh))
286 #define clnt_abort(rh) ((*(rh)->cl_ops->cl_abort)(rh))
287
288 /*
289 * struct rpc_err
290 * CLNT_GETERR(rh);
291 * CLIENT *rh;
292 */
293 #define CLNT_GETERR(rh,errp) ((*(rh)->cl_ops->cl_geterr)(rh, errp))
294 #define clnt_geterr(rh,errp) ((*(rh)->cl_ops->cl_geterr)(rh, errp))
295
296
297 /*
298 * bool_t
299 * CLNT_FREERES(rh, xres, resp);
300 * CLIENT *rh;
301 * xdrproc_t xres;
302 * void *resp;
303 */
304 #define CLNT_FREERES(rh,xres,resp) ((*(rh)->cl_ops->cl_freeres)(rh,xres,resp))
305 #define clnt_freeres(rh,xres,resp) ((*(rh)->cl_ops->cl_freeres)(rh,xres,resp))
306
307 /*
308 * bool_t
309 * CLNT_CONTROL(cl, request, info)
310 * CLIENT *cl;
311 * u_int request;
312 * char *info;
313 */
314 #define CLNT_CONTROL(cl,rq,in) ((*(cl)->cl_ops->cl_control)(cl,rq,in))
315 #define clnt_control(cl,rq,in) ((*(cl)->cl_ops->cl_control)(cl,rq,in))
316
317 /*
318 * control operations that apply to both udp and tcp transports
319 */
320 #define CLSET_TIMEOUT 1 /* set timeout (timeval) */
321 #define CLGET_TIMEOUT 2 /* get timeout (timeval) */
322 #define CLGET_SERVER_ADDR 3 /* get server's address (sockaddr) */
323 #define CLGET_FD 6 /* get connections file descriptor */
324 #define CLGET_SVC_ADDR 7 /* get server's address (netbuf) */
325 #define CLSET_FD_CLOSE 8 /* close fd while clnt_destroy */
326 #define CLSET_FD_NCLOSE 9 /* Do not close fd while clnt_destroy */
327 #define CLGET_XID 10 /* Get xid */
328 #define CLSET_XID 11 /* Set xid */
329 #define CLGET_VERS 12 /* Get version number */
330 #define CLSET_VERS 13 /* Set version number */
331 #define CLGET_PROG 14 /* Get program number */
332 #define CLSET_PROG 15 /* Set program number */
333 #define CLSET_SVC_ADDR 16 /* get server's address (netbuf) */
334 #define CLSET_PUSH_TIMOD 17 /* push timod if not already present */
335 #define CLSET_POP_TIMOD 18 /* pop timod */
336 /*
337 * Connectionless only control operations
338 */
339 #define CLSET_RETRY_TIMEOUT 4 /* set retry timeout (timeval) */
340 #define CLGET_RETRY_TIMEOUT 5 /* get retry timeout (timeval) */
341 #define CLSET_ASYNC 19
342 #define CLSET_CONNECT 20 /* Use connect() for UDP. (int) */
343
344 #ifdef _KERNEL
345 /*
346 * Kernel control operations. The default msleep string is "rpcrecv",
347 * and sleeps are non-interruptible by default.
348 */
349 #define CLSET_WAITCHAN 21 /* set string to use in msleep call */
350 #define CLGET_WAITCHAN 22 /* get string used in msleep call */
351 #define CLSET_INTERRUPTIBLE 23 /* set interruptible flag */
352 #define CLGET_INTERRUPTIBLE 24 /* set interruptible flag */
353 #define CLSET_RETRIES 25 /* set retry count for reconnect */
354 #define CLGET_RETRIES 26 /* get retry count for reconnect */
355 #define CLSET_PRIVPORT 27 /* set privileged source port flag */
356 #define CLGET_PRIVPORT 28 /* get privileged source port flag */
357 #define CLSET_BACKCHANNEL 29 /* set backchannel for socket */
358 #endif
359
360
361 /*
362 * void
363 * CLNT_DESTROY(rh);
364 * CLIENT *rh;
365 */
366 #define CLNT_DESTROY(rh) ((*(rh)->cl_ops->cl_destroy)(rh))
367 #define clnt_destroy(rh) ((*(rh)->cl_ops->cl_destroy)(rh))
368
369
370 /*
371 * RPCTEST is a test program which is accessible on every rpc
372 * transport/port. It is used for testing, performance evaluation,
373 * and network administration.
374 */
375
376 #define RPCTEST_PROGRAM ((rpcprog_t)1)
377 #define RPCTEST_VERSION ((rpcvers_t)1)
378 #define RPCTEST_NULL_PROC ((rpcproc_t)2)
379 #define RPCTEST_NULL_BATCH_PROC ((rpcproc_t)3)
380
381 /*
382 * By convention, procedure 0 takes null arguments and returns them
383 */
384
385 #define NULLPROC ((rpcproc_t)0)
386
387 /*
388 * Below are the client handle creation routines for the various
389 * implementations of client side rpc. They can return NULL if a
390 * creation failure occurs.
391 */
392
393 /*
394 * Generic client creation routine. Supported protocols are those that
395 * belong to the nettype namespace (/etc/netconfig).
396 */
397 __BEGIN_DECLS
398 #ifdef _KERNEL
399
400 /*
401 * struct socket *so; -- socket
402 * struct sockaddr *svcaddr; -- servers address
403 * rpcprog_t prog; -- program number
404 * rpcvers_t vers; -- version number
405 * size_t sendsz; -- buffer recv size
406 * size_t recvsz; -- buffer send size
407 */
408 extern CLIENT *clnt_dg_create(struct socket *so,
409 struct sockaddr *svcaddr, rpcprog_t program, rpcvers_t version,
410 size_t sendsz, size_t recvsz);
411
412 /*
413 * struct socket *so; -- socket
414 * struct sockaddr *svcaddr; -- servers address
415 * rpcprog_t prog; -- program number
416 * rpcvers_t vers; -- version number
417 * size_t sendsz; -- buffer recv size
418 * size_t recvsz; -- buffer send size
419 * int intrflag; -- is it interruptible
420 */
421 extern CLIENT *clnt_vc_create(struct socket *so,
422 struct sockaddr *svcaddr, rpcprog_t program, rpcvers_t version,
423 size_t sendsz, size_t recvsz, int intrflag);
424
425 /*
426 * struct netconfig *nconf; -- network type
427 * struct sockaddr *svcaddr; -- servers address
428 * rpcprog_t prog; -- program number
429 * rpcvers_t vers; -- version number
430 * size_t sendsz; -- buffer recv size
431 * size_t recvsz; -- buffer send size
432 */
433 extern CLIENT *clnt_reconnect_create(struct netconfig *nconf,
434 struct sockaddr *svcaddr, rpcprog_t program, rpcvers_t version,
435 size_t sendsz, size_t recvsz);
436
437 #else
438
439 extern CLIENT *clnt_create(const char *, const rpcprog_t, const rpcvers_t,
440 const char *);
441 /*
442 *
443 * const char *hostname; -- hostname
444 * const rpcprog_t prog; -- program number
445 * const rpcvers_t vers; -- version number
446 * const char *nettype; -- network type
447 */
448
449 /*
450 * Generic client creation routine. Just like clnt_create(), except
451 * it takes an additional timeout parameter.
452 */
453 extern CLIENT * clnt_create_timed(const char *, const rpcprog_t,
454 const rpcvers_t, const char *, const struct timeval *);
455 /*
456 *
457 * const char *hostname; -- hostname
458 * const rpcprog_t prog; -- program number
459 * const rpcvers_t vers; -- version number
460 * const char *nettype; -- network type
461 * const struct timeval *tp; -- timeout
462 */
463
464 /*
465 * Generic client creation routine. Supported protocols are which belong
466 * to the nettype name space.
467 */
468 extern CLIENT *clnt_create_vers(const char *, const rpcprog_t, rpcvers_t *,
469 const rpcvers_t, const rpcvers_t,
470 const char *);
471 /*
472 * const char *host; -- hostname
473 * const rpcprog_t prog; -- program number
474 * rpcvers_t *vers_out; -- servers highest available version
475 * const rpcvers_t vers_low; -- low version number
476 * const rpcvers_t vers_high; -- high version number
477 * const char *nettype; -- network type
478 */
479
480 /*
481 * Generic client creation routine. Supported protocols are which belong
482 * to the nettype name space.
483 */
484 extern CLIENT * clnt_create_vers_timed(const char *, const rpcprog_t,
485 rpcvers_t *, const rpcvers_t, const rpcvers_t, const char *,
486 const struct timeval *);
487 /*
488 * const char *host; -- hostname
489 * const rpcprog_t prog; -- program number
490 * rpcvers_t *vers_out; -- servers highest available version
491 * const rpcvers_t vers_low; -- low version number
492 * const rpcvers_t vers_high; -- high version number
493 * const char *nettype; -- network type
494 * const struct timeval *tp -- timeout
495 */
496
497 /*
498 * Generic client creation routine. It takes a netconfig structure
499 * instead of nettype
500 */
501 extern CLIENT *clnt_tp_create(const char *, const rpcprog_t,
502 const rpcvers_t, const struct netconfig *);
503 /*
504 * const char *hostname; -- hostname
505 * const rpcprog_t prog; -- program number
506 * const rpcvers_t vers; -- version number
507 * const struct netconfig *netconf; -- network config structure
508 */
509
510 /*
511 * Generic client creation routine. Just like clnt_tp_create(), except
512 * it takes an additional timeout parameter.
513 */
514 extern CLIENT * clnt_tp_create_timed(const char *, const rpcprog_t,
515 const rpcvers_t, const struct netconfig *, const struct timeval *);
516 /*
517 * const char *hostname; -- hostname
518 * const rpcprog_t prog; -- program number
519 * const rpcvers_t vers; -- version number
520 * const struct netconfig *netconf; -- network config structure
521 * const struct timeval *tp -- timeout
522 */
523
524 /*
525 * Generic TLI create routine. Only provided for compatibility.
526 */
527
528 extern CLIENT *clnt_tli_create(const int, const struct netconfig *,
529 struct netbuf *, const rpcprog_t,
530 const rpcvers_t, const u_int, const u_int);
531 /*
532 * const register int fd; -- fd
533 * const struct netconfig *nconf; -- netconfig structure
534 * struct netbuf *svcaddr; -- servers address
535 * const u_long prog; -- program number
536 * const u_long vers; -- version number
537 * const u_int sendsz; -- send size
538 * const u_int recvsz; -- recv size
539 */
540
541 /*
542 * Low level clnt create routine for connectionful transports, e.g. tcp.
543 */
544 extern CLIENT *clnt_vc_create(const int, const struct netbuf *,
545 const rpcprog_t, const rpcvers_t,
546 u_int, u_int);
547 /*
548 * Added for compatibility to old rpc 4.0. Obsoleted by clnt_vc_create().
549 */
550 extern CLIENT *clntunix_create(struct sockaddr_un *,
551 u_long, u_long, int *, u_int, u_int);
552 /*
553 * const int fd; -- open file descriptor
554 * const struct netbuf *svcaddr; -- servers address
555 * const rpcprog_t prog; -- program number
556 * const rpcvers_t vers; -- version number
557 * const u_int sendsz; -- buffer recv size
558 * const u_int recvsz; -- buffer send size
559 */
560
561 /*
562 * Low level clnt create routine for connectionless transports, e.g. udp.
563 */
564 extern CLIENT *clnt_dg_create(const int, const struct netbuf *,
565 const rpcprog_t, const rpcvers_t,
566 const u_int, const u_int);
567 /*
568 * const int fd; -- open file descriptor
569 * const struct netbuf *svcaddr; -- servers address
570 * const rpcprog_t program; -- program number
571 * const rpcvers_t version; -- version number
572 * const u_int sendsz; -- buffer recv size
573 * const u_int recvsz; -- buffer send size
574 */
575
576 /*
577 * Memory based rpc (for speed check and testing)
578 * CLIENT *
579 * clnt_raw_create(prog, vers)
580 * u_long prog;
581 * u_long vers;
582 */
583 extern CLIENT *clnt_raw_create(rpcprog_t, rpcvers_t);
584 #endif
585
586 __END_DECLS
587
588
589 /*
590 * Print why creation failed
591 */
592 __BEGIN_DECLS
593 extern void clnt_pcreateerror(const char *); /* stderr */
594 extern char *clnt_spcreateerror(const char *); /* string */
595 __END_DECLS
596
597 /*
598 * Like clnt_perror(), but is more verbose in its output
599 */
600 __BEGIN_DECLS
601 extern void clnt_perrno(enum clnt_stat); /* stderr */
602 extern char *clnt_sperrno(enum clnt_stat); /* string */
603 __END_DECLS
604
605 /*
606 * Print an English error message, given the client error code
607 */
608 __BEGIN_DECLS
609 extern void clnt_perror(CLIENT *, const char *); /* stderr */
610 extern char *clnt_sperror(CLIENT *, const char *); /* string */
611 __END_DECLS
612
613
614 /*
615 * If a creation fails, the following allows the user to figure out why.
616 */
617 struct rpc_createerr {
618 enum clnt_stat cf_stat;
619 struct rpc_err cf_error; /* useful when cf_stat == RPC_PMAPFAILURE */
620 };
621
622 #ifdef _KERNEL
623 extern struct rpc_createerr rpc_createerr;
624 #else
625 __BEGIN_DECLS
626 extern struct rpc_createerr *__rpc_createerr(void);
627 __END_DECLS
628 #define rpc_createerr (*(__rpc_createerr()))
629 #endif
630
631 #ifndef _KERNEL
632 /*
633 * The simplified interface:
634 * enum clnt_stat
635 * rpc_call(host, prognum, versnum, procnum, inproc, in, outproc, out, nettype)
636 * const char *host;
637 * const rpcprog_t prognum;
638 * const rpcvers_t versnum;
639 * const rpcproc_t procnum;
640 * const xdrproc_t inproc, outproc;
641 * const char *in;
642 * char *out;
643 * const char *nettype;
644 */
645 __BEGIN_DECLS
646 extern enum clnt_stat rpc_call(const char *, const rpcprog_t,
647 const rpcvers_t, const rpcproc_t,
648 const xdrproc_t, const char *,
649 const xdrproc_t, char *, const char *);
650 __END_DECLS
651
652 /*
653 * RPC broadcast interface
654 * The call is broadcasted to all locally connected nets.
655 *
656 * extern enum clnt_stat
657 * rpc_broadcast(prog, vers, proc, xargs, argsp, xresults, resultsp,
658 * eachresult, nettype)
659 * const rpcprog_t prog; -- program number
660 * const rpcvers_t vers; -- version number
661 * const rpcproc_t proc; -- procedure number
662 * const xdrproc_t xargs; -- xdr routine for args
663 * caddr_t argsp; -- pointer to args
664 * const xdrproc_t xresults; -- xdr routine for results
665 * caddr_t resultsp; -- pointer to results
666 * const resultproc_t eachresult; -- call with each result
667 * const char *nettype; -- Transport type
668 *
669 * For each valid response received, the procedure eachresult is called.
670 * Its form is:
671 * done = eachresult(resp, raddr, nconf)
672 * bool_t done;
673 * caddr_t resp;
674 * struct netbuf *raddr;
675 * struct netconfig *nconf;
676 * where resp points to the results of the call and raddr is the
677 * address if the responder to the broadcast. nconf is the transport
678 * on which the response was received.
679 *
680 * extern enum clnt_stat
681 * rpc_broadcast_exp(prog, vers, proc, xargs, argsp, xresults, resultsp,
682 * eachresult, inittime, waittime, nettype)
683 * const rpcprog_t prog; -- program number
684 * const rpcvers_t vers; -- version number
685 * const rpcproc_t proc; -- procedure number
686 * const xdrproc_t xargs; -- xdr routine for args
687 * caddr_t argsp; -- pointer to args
688 * const xdrproc_t xresults; -- xdr routine for results
689 * caddr_t resultsp; -- pointer to results
690 * const resultproc_t eachresult; -- call with each result
691 * const int inittime; -- how long to wait initially
692 * const int waittime; -- maximum time to wait
693 * const char *nettype; -- Transport type
694 */
695
696 typedef bool_t (*resultproc_t)(caddr_t, ...);
697
698 __BEGIN_DECLS
699 extern enum clnt_stat rpc_broadcast(const rpcprog_t, const rpcvers_t,
700 const rpcproc_t, const xdrproc_t,
701 caddr_t, const xdrproc_t, caddr_t,
702 const resultproc_t, const char *);
703 extern enum clnt_stat rpc_broadcast_exp(const rpcprog_t, const rpcvers_t,
704 const rpcproc_t, const xdrproc_t,
705 caddr_t, const xdrproc_t, caddr_t,
706 const resultproc_t, const int,
707 const int, const char *);
708 __END_DECLS
709
710 /* For backward compatibility */
711 #include <rpc/clnt_soc.h>
712 #endif
713
714 #endif /* !_RPC_CLNT_H_ */
Cache object: 422b5b0ddfdfba9123fe72f89fcc948d
|