FreeBSD/Linux Kernel Cross Reference
sys/sys/mtio.h
1 /*
2 * Copyright (c) 1982, 1986, 1993
3 * The Regents of the University of California. All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. All advertising materials mentioning features or use of this software
14 * must display the following acknowledgement:
15 * This product includes software developed by the University of
16 * California, Berkeley and its contributors.
17 * 4. Neither the name of the University nor the names of its contributors
18 * may be used to endorse or promote products derived from this software
19 * without specific prior written permission.
20 *
21 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31 * SUCH DAMAGE.
32 *
33 * @(#)mtio.h 8.1 (Berkeley) 6/2/93
34 * $FreeBSD$
35 */
36
37 #ifndef _SYS_MTIO_H_
38 #define _SYS_MTIO_H_
39
40 #ifndef KERNEL
41 #include <sys/types.h>
42 #endif
43 #include <sys/ioccom.h>
44
45 /*
46 * Structures and definitions for mag tape io control commands
47 */
48
49 /* structure for MTIOCTOP - mag tape op command */
50 struct mtop {
51 short mt_op; /* operations defined below */
52 daddr_t mt_count; /* how many of them */
53 };
54
55 /* operations */
56 #define MTWEOF 0 /* write an end-of-file record */
57 #define MTFSF 1 /* forward space file */
58 #define MTBSF 2 /* backward space file */
59 #define MTFSR 3 /* forward space record */
60 #define MTBSR 4 /* backward space record */
61 #define MTREW 5 /* rewind */
62 #define MTOFFL 6 /* rewind and put the drive offline */
63 #define MTNOP 7 /* no operation, sets status only */
64 #define MTCACHE 8 /* enable controller cache */
65 #define MTNOCACHE 9 /* disable controller cache */
66
67 #if defined(__FreeBSD__)
68 /* Set block size for device. If device is a variable size dev */
69 /* a non zero parameter will change the device to a fixed block size */
70 /* device with block size set to that of the parameter passed in. */
71 /* Resetting the block size to 0 will restore the device to a variable */
72 /* block size device. */
73
74 #define MTSETBSIZ 10
75
76 /* Set density values for device. Sets the value for the opened mode only. */
77
78 #define MTSETDNSTY 11
79
80 #define MTERASE 12 /* erase to EOM */
81 #define MTEOD 13 /* Space to EOM */
82 #define MTCOMP 14 /* select compression mode 0=off, 1=def */
83 #define MTRETENS 15 /* re-tension tape */
84 #define MTWSS 16 /* write setmark(s) */
85 #define MTFSS 17 /* forward space setmark */
86 #define MTBSS 18 /* backward space setmark */
87
88 #define MT_COMP_ENABLE 0xffffffff
89 #define MT_COMP_DISABLED 0xfffffffe
90 #define MT_COMP_UNSUPP 0xfffffffd
91
92 /*
93 * Values in mt_dsreg that say what the device is doing
94 */
95 #define MTIO_DSREG_NIL 0 /* Unknown */
96 #define MTIO_DSREG_REST 1 /* Doing Nothing */
97 #define MTIO_DSREG_RBSY 2 /* Communicating with tape (but no motion) */
98 #define MTIO_DSREG_WR 20 /* Writing */
99 #define MTIO_DSREG_FMK 21 /* Writing Filemarks */
100 #define MTIO_DSREG_ZER 22 /* Erasing */
101 #define MTIO_DSREG_RD 30 /* Reading */
102 #define MTIO_DSREG_FWD 40 /* Spacing Forward */
103 #define MTIO_DSREG_REV 41 /* Spacing Reverse */
104 #define MTIO_DSREG_POS 42 /* Hardware Positioning (direction unknown) */
105 #define MTIO_DSREG_REW 43 /* Rewinding */
106 #define MTIO_DSREG_TEN 44 /* Retensioning */
107 #define MTIO_DSREG_UNL 45 /* Unloading */
108 #define MTIO_DSREG_LD 46 /* Loading */
109
110 #endif /* __FreeBSD__ */
111
112 /* structure for MTIOCGET - mag tape get status command */
113
114 struct mtget {
115 short mt_type; /* type of magtape device */
116 /* the following two registers are grossly device dependent */
117 short mt_dsreg; /* ``drive status'' register */
118 short mt_erreg; /* ``error'' register */
119 /* end device-dependent registers */
120 short mt_resid; /* residual count */
121 #if defined (__FreeBSD__)
122 daddr_t mt_blksiz; /* presently operating blocksize */
123 daddr_t mt_density; /* presently operating density */
124 u_int32_t mt_comp; /* presently operating compression */
125 daddr_t mt_blksiz0; /* blocksize for mode 0 */
126 daddr_t mt_blksiz1; /* blocksize for mode 1 */
127 daddr_t mt_blksiz2; /* blocksize for mode 2 */
128 daddr_t mt_blksiz3; /* blocksize for mode 3 */
129 daddr_t mt_density0; /* density for mode 0 */
130 daddr_t mt_density1; /* density for mode 1 */
131 daddr_t mt_density2; /* density for mode 2 */
132 daddr_t mt_density3; /* density for mode 3 */
133 /* the following are not yet implemented */
134 u_int32_t mt_comp0; /* compression type for mode 0 */
135 u_int32_t mt_comp1; /* compression type for mode 1 */
136 u_int32_t mt_comp2; /* compression type for mode 2 */
137 u_int32_t mt_comp3; /* compression type for mode 3 */
138 /* end not yet implemented */
139 #endif
140 daddr_t mt_fileno; /* relative file number of current position */
141 daddr_t mt_blkno; /* relative block number of current position */
142 };
143
144 /* structure for MTIOCERRSTAT - tape get error status command */
145 /* really only supported for SCSI tapes right now */
146 struct scsi_tape_errors {
147 /*
148 * These are latched from the last command that had a SCSI
149 * Check Condition noted for these operations. The act
150 * of issuing an MTIOCERRSTAT unlatches and clears them.
151 */
152 u_int8_t io_sense[32]; /* Last Sense Data For Data I/O */
153 u_int32_t io_resid; /* residual count from last Data I/O */
154 u_int8_t io_cdb[16]; /* Command that Caused the Last Data Sense */
155 u_int8_t ctl_sense[32]; /* Last Sense Data For Control I/O */
156 u_int32_t ctl_resid; /* residual count from last Control I/O */
157 u_int8_t ctl_cdb[16]; /* Command that Caused the Last Control Sense */
158 /*
159 * These are the read and write cumulative error counters.
160 * (how to reset cumulative error counters is not yet defined).
161 * (not implemented as yet but space is being reserved for them)
162 */
163 struct {
164 u_int32_t retries; /* total # retries performed */
165 u_int32_t corrected; /* total # corrections performed */
166 u_int32_t processed; /* total # corrections succssful */
167 u_int32_t failures; /* total # corrections/retries failed */
168 u_int64_t nbytes; /* total # bytes processed */
169 } wterr, rderr;
170 };
171
172 union mterrstat {
173 struct scsi_tape_errors scsi_errstat;
174 char _reserved_padding[256];
175 };
176
177 /*
178 * Constants for mt_type byte. These are the same
179 * for controllers compatible with the types listed.
180 */
181 #define MT_ISTS 0x01 /* TS-11 */
182 #define MT_ISHT 0x02 /* TM03 Massbus: TE16, TU45, TU77 */
183 #define MT_ISTM 0x03 /* TM11/TE10 Unibus */
184 #define MT_ISMT 0x04 /* TM78/TU78 Massbus */
185 #define MT_ISUT 0x05 /* SI TU-45 emulation on Unibus */
186 #define MT_ISCPC 0x06 /* SUN */
187 #define MT_ISAR 0x07 /* SUN */
188 #define MT_ISTMSCP 0x08 /* DEC TMSCP protocol (TU81, TK50) */
189 #define MT_ISCY 0x09 /* CCI Cipher */
190 #define MT_ISCT 0x0a /* HP 1/4 tape */
191 #define MT_ISFHP 0x0b /* HP 7980 1/2 tape */
192 #define MT_ISEXABYTE 0x0c /* Exabyte */
193 #define MT_ISEXA8200 0x0c /* Exabyte EXB-8200 */
194 #define MT_ISEXA8500 0x0d /* Exabyte EXB-8500 */
195 #define MT_ISVIPER1 0x0e /* Archive Viper-150 */
196 #define MT_ISPYTHON 0x0f /* Archive Python (DAT) */
197 #define MT_ISHPDAT 0x10 /* HP 35450A DAT drive */
198 #define MT_ISMFOUR 0x11 /* M4 Data 1/2 9track drive */
199 #define MT_ISTK50 0x12 /* DEC SCSI TK50 */
200 #define MT_ISMT02 0x13 /* Emulex MT02 SCSI tape controller */
201
202 /* mag tape io control commands */
203 #define MTIOCTOP _IOW('m', 1, struct mtop) /* do a mag tape op */
204 #define MTIOCGET _IOR('m', 2, struct mtget) /* get tape status */
205 /* these two do not appear to be used anywhere */
206 #define MTIOCIEOT _IO('m', 3) /* ignore EOT error */
207 #define MTIOCEEOT _IO('m', 4) /* enable EOT error */
208 /*
209 * When more SCSI-3 SSC (streaming device) devices are out there
210 * that support the full 32 byte type 2 structure, we'll have to
211 * rethink these ioctls to support all the entities they haul into
212 * the picture (64 bit blocks, logical file record numbers, etc..).
213 */
214 #define MTIOCRDSPOS _IOR('m', 5, u_int32_t) /* get logical blk addr */
215 #define MTIOCRDHPOS _IOR('m', 6, u_int32_t) /* get hardware blk addr */
216 #define MTIOCSLOCATE _IOW('m', 5, u_int32_t) /* seek to logical blk addr */
217 #define MTIOCHLOCATE _IOW('m', 6, u_int32_t) /* seek to hardware blk addr */
218 #define MTIOCERRSTAT _IOR('m', 7, union mterrstat) /* get tape errors */
219 /*
220 * Set EOT model- argument is number of filemarks to end a tape with.
221 * Note that not all possible values will be accepted.
222 */
223 #define MTIOCSETEOTMODEL _IOW('m', 8, u_int32_t)
224 /* Get current EOT model */
225 #define MTIOCGETEOTMODEL _IOR('m', 8, u_int32_t)
226
227 #ifndef KERNEL
228 #define DEFTAPE "/dev/nrsa0"
229 #endif
230
231 #ifdef KERNEL
232 /*
233 * minor device number
234 */
235
236 #define T_UNIT 003 /* unit selection */
237 #define T_NOREWIND 004 /* no rewind on close */
238 #define T_DENSEL 030 /* density select */
239 #define T_800BPI 000 /* select 800 bpi */
240 #define T_1600BPI 010 /* select 1600 bpi */
241 #define T_6250BPI 020 /* select 6250 bpi */
242 #define T_BADBPI 030 /* undefined selection */
243 #endif
244
245 #endif /* !_SYS_MTIO_H_ */
Cache object: a3636e2a39101ba637812255dbae2030
|